How to use search (Advanced) - Ford Bronco Forum
 1Likes
  • 1 Post By BikerPepe`
 
LinkBack Thread Tools Display Modes
post #1 of 20 (permalink) Old 02-15-2006, 02:31 PM Thread Starter
The Anti Yam!
 
Gacknar's Avatar
 
Join Date: Oct 2003
Location: Georgia, Douglasville
Posts: 22,716
Bronco Info: 86 Bronco XLT 357w/AOD
iTrader: (4)
How to use search (Advanced)

This is where the Advanced search function is located. (Under the Tools Tab)
It appears in almost every page you could go to on this site.
Click on it to enter Search














If you want search by user name enter it here.
The pull down menu can be switched between threads started by user or post by user.
"Posts by user" will find every post ever by a user
"Threads started by" will only find threads started by the user.














This is where you would enter a key word if you wanted to search by key word.
The pull down menu can be switched from "Search entire posts" to "Search thread titles only"
"Search entire post" will search the entire contents of every single thread on FSB.
"Tittles only" will just search the thread tittles














Find threads with
If your only interested in threads with many replies, you can set that option here.
If your only interested in threads with few replies, you can set that here too.











Find posts from
If your only interested in newer posts, you can set that here.
Same with older posts.










Sort results by
This has two panels to choose from. The first one sorts the order by groups.

The second changes the order of the search results from highest to lowest or oldest to newest and vice versa depending on the criteria you set in the other "Sort results by" window.







Show results as
You can pick either threads or posts.
Threads will show each thread as you are use to seeing it, click on the thread to read the posts.

Showing them as posts will show you the actual post in the thread that has the keyword or user name you are looking for. It will have a link to the thread and a link to start the thread at that particular post

Search in forum.
This lets you select which forums you want to search in.
Say you want info on a 351m, you could set the search to only look in 78-79


















Sorry for the big picks, it was the only way to keep them clear

86 Bronco - 357W/AOD - 6" suspension lift, 3" body lift - 38" TSL Radials - 456:1 Gears
Sequential Multiport Mass-Air Fuel Injection from a 93 Mustang GT

My SuperMotors Site - My Engine

The Greatest Thread on FSB

Last edited by Gacknar; 10-07-2016 at 10:55 AM.
Gacknar is offline  
Sponsored Links
Advertisement
 
post #2 of 20 (permalink) Old 07-18-2006, 09:29 AM
Moderator
 
miesk5's Avatar
 
Join Date: Oct 2003
Location: NJ
Posts: 17,194
Bronco Info: 96 Bronco XL 5.0 E4OD, Man Xfer/Hubs
iTrader: (2)
Garage
btw, how is a search entry performed for posts older than one year?
I was just searching for an old post I made, but the search section; "Find Posts from" only goes back to one year.
I know the archives are avail., but is there a search function for these too?

btw, I found my post by Googling my name and the short tite of the subject I was seeking

and what is "Also search in child forums"?????

See my partially recovered Bronco web site ...Will need to clean up dead links & add many more new links some day. Thanks to Mr. Schwim!
THANKS to ALL WHO SERVE!
miesk5 is offline  
post #3 of 20 (permalink) Old 07-18-2006, 10:59 AM Thread Starter
The Anti Yam!
 
Gacknar's Avatar
 
Join Date: Oct 2003
Location: Georgia, Douglasville
Posts: 22,716
Bronco Info: 86 Bronco XLT 357w/AOD
iTrader: (4)
Quote:
Originally Posted by miesk5
btw, how is a search entry performed for posts older than one year?
By doing a regular search with your name and the title of the thread. Every post you ever maid will be found. At the bottom right of the first page there will be a list of page numbers. If you know it was over a year ago click a few pages out and see what the date is, you can go all the way back to your verry first post.

Quote:
Originally Posted by miesk5
and what is "Also search in child forums"?????
Thats just a standard V-Bulliton thing for more family orented sights that might have forums for kids too.

86 Bronco - 357W/AOD - 6" suspension lift, 3" body lift - 38" TSL Radials - 456:1 Gears
Sequential Multiport Mass-Air Fuel Injection from a 93 Mustang GT

My SuperMotors Site - My Engine

The Greatest Thread on FSB
Gacknar is offline  
 
post #4 of 20 (permalink) Old 07-18-2006, 07:50 PM
Original FSB.COM Owner
 
dsotmoon's Avatar
 
Join Date: Feb 2003
Location: Salem, VA
Posts: 12,119
Bronco Info: Another Broncoless Admin
iTrader: (3)
Quote:
Originally Posted by Gacknar
Thats just a standard V-Bulliton thing for more family orented sights that might have forums for kids too.
ummm, good answer, but not quite

"child forums" are sub forums, like a "child forum" of the anything else forum is the news&politics forum

Joe
FullSizeBronco.com
dsotmoon is offline  
post #5 of 20 (permalink) Old 07-18-2006, 07:51 PM
rolling Rolling ROLLING....
 
Join Date: Jun 2005
Location: sol cal (west covina)
Posts: 22,687
Bronco Info: 93 Cherokee
iTrader: (34)
Quote:
Originally Posted by dsotmoon
ummm, good answer, but not quite

"child forums" are sub forums, like a "child forum" of the anything else forum is the news&politics forum
Hey...he tried...

Tim

Newest token Jeep owner....

Redwagon is offline  
post #6 of 20 (permalink) Old 07-18-2006, 11:40 PM Thread Starter
The Anti Yam!
 
Gacknar's Avatar
 
Join Date: Oct 2003
Location: Georgia, Douglasville
Posts: 22,716
Bronco Info: 86 Bronco XLT 357w/AOD
iTrader: (4)
Quote:
Originally Posted by dsotmoon
ummm, good answer, but not quite

"child forums" are sub forums, like a "child forum" of the anything else forum is the news&politics forum
Hey, I dont own the site....



I just pretend I do


Hey, Like Redwagon said.....I tried

86 Bronco - 357W/AOD - 6" suspension lift, 3" body lift - 38" TSL Radials - 456:1 Gears
Sequential Multiport Mass-Air Fuel Injection from a 93 Mustang GT

My SuperMotors Site - My Engine

The Greatest Thread on FSB
Gacknar is offline  
post #7 of 20 (permalink) Old 07-19-2006, 02:51 AM
Crusher Mike
 
1clean5.8's Avatar
 
Join Date: Nov 2004
Location: SanTan Valley, AZ
Posts: 6,032
Bronco Info: 1991 Eddie Bauer 5.8. Flowmaster exuast, SAS 35 mickeys 7" lift, 4.88s locked, Viar OBA
iTrader: (10)
Can we place a tutorial on the welcome page that Noobs have to take before the site lets them post ? Just an Idea



Quote:
Originally Posted by MYXD40 View Post
okay so scrap the 1 ton and throw in a D60?
1clean5.8 is online now  
post #8 of 20 (permalink) Old 07-19-2006, 07:23 AM
Original FSB.COM Owner
 
dsotmoon's Avatar
 
Join Date: Feb 2003
Location: Salem, VA
Posts: 12,119
Bronco Info: Another Broncoless Admin
iTrader: (3)
Quote:
Originally Posted by 1clean5.8
Can we place a tutorial on the welcome page that Noobs have to take before the site lets them post ? Just an Idea
they have to read & "sign" (by clicking a check box) that they have read the rules, how to search, etc before posting in the help sections, as this is where the main problems usually are

Joe
FullSizeBronco.com
dsotmoon is offline  
post #9 of 20 (permalink) Old 07-19-2006, 09:20 AM
Moderator
 
miesk5's Avatar
 
Join Date: Oct 2003
Location: NJ
Posts: 17,194
Bronco Info: 96 Bronco XL 5.0 E4OD, Man Xfer/Hubs
iTrader: (2)
Garage
Quote:
Originally Posted by Gacknar
By doing a regular search with your name and the title of the thread. Every post you ever maid will be found. At the bottom right of the first page there will be a list of page numbers. If you know it was over a year ago click a few pages out and see what the date is, you can go all the way back to your verry first post.
thanks, but try it, mine goes back only to 02-25-2006 03:17 PM

I tried all combos of entries in Search and trying "Any Date"; "and Newer" & "and Older", etc.

as well as Clicking User Name, "View Profile" & Find all posts by ____" & "Find all threads started by ____"

Haven't found any going back to at least 2003.

and way of searching Archives?

See my partially recovered Bronco web site ...Will need to clean up dead links & add many more new links some day. Thanks to Mr. Schwim!
THANKS to ALL WHO SERVE!
miesk5 is offline  
post #10 of 20 (permalink) Old 07-19-2006, 10:46 AM Thread Starter
The Anti Yam!
 
Gacknar's Avatar
 
Join Date: Oct 2003
Location: Georgia, Douglasville
Posts: 22,716
Bronco Info: 86 Bronco XLT 357w/AOD
iTrader: (4)
Quote:
Originally Posted by miesk5
thanks, but try it, mine goes back only to 02-25-2006 03:17 PM
Just did, it went back to 11-08-2003 02:16 PM

86 Bronco - 357W/AOD - 6" suspension lift, 3" body lift - 38" TSL Radials - 456:1 Gears
Sequential Multiport Mass-Air Fuel Injection from a 93 Mustang GT

My SuperMotors Site - My Engine

The Greatest Thread on FSB
Gacknar is offline  
post #11 of 20 (permalink) Old 07-19-2006, 12:38 PM
Moderator
 
miesk5's Avatar
 
Join Date: Oct 2003
Location: NJ
Posts: 17,194
Bronco Info: 96 Bronco XL 5.0 E4OD, Man Xfer/Hubs
iTrader: (2)
Garage
ok, what did you do to get back to 2003?
I did 3 searches for your name and oldest post was 06-13-2006, 05:50 PM

I'm using:
Search (in gray toobar)
Search Forums
Search by User Name
User Name: miesk5
Under Search Options;

Find Posts from
Any Date

Search in Forum(s)
Seartch All Open Forums

Search Now

See my partially recovered Bronco web site ...Will need to clean up dead links & add many more new links some day. Thanks to Mr. Schwim!
THANKS to ALL WHO SERVE!
miesk5 is offline  
post #12 of 20 (permalink) Old 07-19-2006, 12:49 PM
Moderator
 
miesk5's Avatar
 
Join Date: Oct 2003
Location: NJ
Posts: 17,194
Bronco Info: 96 Bronco XL 5.0 E4OD, Man Xfer/Hubs
iTrader: (2)
Garage
Also,
tried by clicking my user name in last post in this thread as described in above post.

See my partially recovered Bronco web site ...Will need to clean up dead links & add many more new links some day. Thanks to Mr. Schwim!
THANKS to ALL WHO SERVE!
miesk5 is offline  
post #13 of 20 (permalink) Old 07-19-2006, 02:39 PM
Moderator
 
miesk5's Avatar
 
Join Date: Oct 2003
Location: NJ
Posts: 17,194
Bronco Info: 96 Bronco XL 5.0 E4OD, Man Xfer/Hubs
iTrader: (2)
Garage
OK!
tried searching by "Key Word" instead of User Name and in profile...and got back to 03...thanks G for trying to help me; a bad brain day(s) here again for me.

See my partially recovered Bronco web site ...Will need to clean up dead links & add many more new links some day. Thanks to Mr. Schwim!
THANKS to ALL WHO SERVE!
miesk5 is offline  
post #14 of 20 (permalink) Old 07-20-2006, 08:36 AM
Moderator
 
miesk5's Avatar
 
Join Date: Oct 2003
Location: NJ
Posts: 17,194
Bronco Info: 96 Bronco XL 5.0 E4OD, Man Xfer/Hubs
iTrader: (2)
Garage
Maybe it's time to update this Search thread to show above search to get back to earlier years?
and same for search by Key Word

See my partially recovered Bronco web site ...Will need to clean up dead links & add many more new links some day. Thanks to Mr. Schwim!
THANKS to ALL WHO SERVE!
miesk5 is offline  
post #15 of 20 (permalink) Old 07-20-2006, 09:01 AM Thread Starter
The Anti Yam!
 
Gacknar's Avatar
 
Join Date: Oct 2003
Location: Georgia, Douglasville
Posts: 22,716
Bronco Info: 86 Bronco XLT 357w/AOD
iTrader: (4)
Quote:
Originally Posted by miesk5
Maybe it's time to update this Search thread to show above search to get back to earlier years?
and same for search by Key Word
Search by key word is the second pic down.

And I didn't think I needed to cover "sort results by" because it just seemed self explanatory but I will update that as well.

But here is how to find your oldest post.
Put your name in the "user name" box and change second "sort results by" box to "Ascending"




Hit search.

The oldest thread with your usure name will be the first one.




There ya go

86 Bronco - 357W/AOD - 6" suspension lift, 3" body lift - 38" TSL Radials - 456:1 Gears
Sequential Multiport Mass-Air Fuel Injection from a 93 Mustang GT

My SuperMotors Site - My Engine

The Greatest Thread on FSB
Gacknar is offline  
post #16 of 20 (permalink) Old 07-20-2006, 09:31 AM Thread Starter
The Anti Yam!
 
Gacknar's Avatar
 
Join Date: Oct 2003
Location: Georgia, Douglasville
Posts: 22,716
Bronco Info: 86 Bronco XLT 357w/AOD
iTrader: (4)
"Sort results by" now appears in both of the tutorials.

86 Bronco - 357W/AOD - 6" suspension lift, 3" body lift - 38" TSL Radials - 456:1 Gears
Sequential Multiport Mass-Air Fuel Injection from a 93 Mustang GT

My SuperMotors Site - My Engine

The Greatest Thread on FSB

Last edited by Gacknar; 07-20-2006 at 09:34 AM.
Gacknar is offline  
post #17 of 20 (permalink) Old 07-20-2006, 02:26 PM
Moderator
 
miesk5's Avatar
 
Join Date: Oct 2003
Location: NJ
Posts: 17,194
Bronco Info: 96 Bronco XL 5.0 E4OD, Man Xfer/Hubs
iTrader: (2)
Garage
ok thanks!

See my partially recovered Bronco web site ...Will need to clean up dead links & add many more new links some day. Thanks to Mr. Schwim!
THANKS to ALL WHO SERVE!
miesk5 is offline  
post #18 of 20 (permalink) Old 12-17-2008, 05:51 PM
Banned
 
Steve83's Avatar
 
Join Date: Jul 2003
Location: Memphis, TN
Posts: 40,449
Bronco Info: '83 VIN & title on '93 frame/body w/'95 4.9L & EB paint
iTrader: (103)
Two more points worth noting:

1) To search in several forums, hold down the CTRL key while you select them all.
2) To search WITHIN the text on a web page (here or almost anywhere else), click in the text area of the page, then hit CTRL+F <Find>, type your search criteria in the text field, and hit ENTER as many times as necessary. If you're looking for information about air conditioning, you might search for "ac", but that would find every instance of that pattern, including words like "Gacknar", "each", & "traction". So a better search term might be "a/c" but that might find electrical references, or "ir con" which would only find air condition... Graphic text (images), Flash movies, & some other web pages don't support this function.
Steve83 is offline  
post #19 of 20 (permalink) Old 12-18-2012, 05:06 PM
Registered User
 
Join Date: Oct 2012
Location: Snohomish, WA
Posts: 15
Bronco Info: 1996 XLT 5.8L
iTrader: (0)
I realize this is an old thread but is there a way to search for a string, such as air conditioning? I was looking for suspension lift and it found all suspension, all lift, and suspension lift combinations. I would like to have narrowed it to just the suspension lift hits.
White96 is offline  
post #20 of 20 (permalink) Old 12-19-2012, 07:59 PM
Harley's & Bronco's FTW!
 
BikerPepe`'s Avatar
 
Join Date: Feb 2003
Location: N.E. WA
Posts: 32,485
Bronco Info: '95 XLT, 5.8/E4OD/MassAir/6" lift/4.56's/35x12.5 BFG AT-KO2
iTrader: (4)
Garage
standard search query protocols require two (or more) separate words to be enclosed in "quotes" for specific hits to match both (and/or all) words in the query, instead of an either/or result.

try "suspension lift" and see if that helps narrow it down for you.

it appears that using the quote combo works, but confuses the script that ads the red highlight to the searched for text.
pretty large topic around here... I'd suggest adding a year or any other generic but narrowing terms.

enjoy... more info than you can shake a mouse at around here.
If no luck after a good search... feel free to hit the "Noobie Bronco Tech Questions. Flame free zone!" for questions and further references.
storminc likes this.

"When life throws you a curve... LEAN INTO IT!"

SuperMotors - Since 2002
BikerPepe` is online now  
Reply

  Ford Bronco Forum > Welcome > Suggestions, Feedback & Site Help

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Bronco Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself. DO NOT USE Gmail.com accounts. If you only have a Gmail.com email please contact the administrator here

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome