Can a Flowmaster be installed backwards?? - FSB Forums
 
LinkBack Thread Tools Display Modes
post #1 of 14 (permalink) Old 02-22-2008, 08:49 PM Thread Starter
Registered User
 
Join Date: Nov 2007
Posts: 47
Can a Flowmaster be installed backwards??

I am planning on running 2.5" duals from long tubes on my 88 Bronco and dumping it before the axle. I have a 3"SI/2.5"DO Flowmaster Super 40 muffler. Can it be installed backwards so I'd have a 2.5" DI and a 3" SO with a turn down? Just thinking of this because I already have the muffler.
Kellar is offline  
Sponsored Links
Advertisement
 
post #2 of 14 (permalink) Old 02-22-2008, 08:53 PM
Satyr of the Midwest
 
SigEpBlue's Avatar
 
Join Date: Nov 2005
Location: Ida & Grand Rapids, Michigan, a.k.a The Unemployment Capital of America
Posts: 17,754
Bronco Info: 1993 EB, 5.8L, BIO0 MAF, GT40Ps, Mustang cam, GT40 Intake, Custom Headers, Moates QuarterHorse
Not a good idea. The Blowmaster chambered mufflers like those typically have directional baffles in them, particularly evident in the Delta Flow of theirs.

SigEpBlue
Wheelin' across Michigan from Ida to Grand Rapids, baby!
Quote:
Nemo nisi per amicitiam cognoscitur -- No one learns except by friendship.
Quote:
Originally Posted by Adlai Stevenson
Isn't it conceivable to you that an intelligent person could harbor two opposing ideas in his mind?
SigEpBlue is offline  
post #3 of 14 (permalink) Old 02-22-2008, 11:15 PM
Registered User
 
Bronco'96's Avatar
 
Join Date: Nov 2007
Posts: 134
x2
Bronco'96 is offline  
post #4 of 14 (permalink) Old 02-22-2008, 11:17 PM
Registered User
 
86bronco64's Avatar
 
Join Date: Oct 2006
Location: Aurora, CO.
Posts: 490
Bronco Info: Chevy Colorado
they sell fittings to change the size

Quote:
Originally Posted by Soldiermedic View Post
Do you need that sawzall thing to put the hardtop back on, too?
86bronco64 is offline  
post #5 of 14 (permalink) Old 02-22-2008, 11:50 PM
Fullsize Member
 
MikE2's Avatar
 
Join Date: Jul 2004
Posts: 2,959
give it a try
MikE2 is offline  
post #6 of 14 (permalink) Old 02-22-2008, 11:53 PM
It's BTW Not AKA!
 
GTRider245's Avatar
 
Join Date: Sep 2005
Location: Georgia
Posts: 5,357
Bronco Info: 92 F-150 4x4, 302, BBK Shorties, Flowmaster Duals, M5OD, 2" Rancho Coils, 33x12.50 M/Ts
And take videos

1992 F-150 4x4
East Coast Firefighting- Only the Best
http://www.supermotors.org/vehicles/...il.php?id=4768

Quote:
Originally Posted by dogonmut View Post
NTB stole my baby's momma away from me when she was on her way down to the check cashin' store to pay my beeper bill.
Quote:
Originally Posted by stan the man View Post
I spent $330 for 4 BJs.
GTRider245 is offline  
post #7 of 14 (permalink) Old 02-22-2008, 11:59 PM
Registered User
 
broncoxlt4x4's Avatar
 
Join Date: Jun 2005
Location: Union County NJ
Posts: 1,027
Bronco Info: 08 Ford F150 10" lift 35s(for now), 90 Yj 7" 35s, 04 Raptor 660
not a good idea... They are directional.... either live the it, or buy a new muffler....


08 Ford F150---10'' lift 35s(until regear for 38s)
90 Jeep YJ----- 7'' 35s locked caged
04 Raptor 660----+2+1 a-arms, exhuast, motor work
86 Ford F250---16" lift, SAS 1 tons, 40'' boggers SOLD
broncoxlt4x4 is offline  
post #8 of 14 (permalink) Old 02-23-2008, 12:11 AM
Lick my balls
 
waltman's Avatar
 
Join Date: Oct 2005
Location: far from reality
Posts: 13,135
Bronco Info: 1989 bronco, 3" suspension lift, rebuilt 302 with cam, 33' big-os
You can't go wrong, as long as you know what i n spells, you should be good to go

there is no such thing as stupid questions, just stupid people.
Only that in you which is me can hear what I'm saying
No matter where you go or what you do, you live your entire life within the confines of your head
I don't suffer from insanity; I enjoy every minute of it

waltman is offline  
post #9 of 14 (permalink) Old 02-23-2008, 03:23 AM
Registered User
 
M.L.S.C.'s Avatar
 
Join Date: Jan 2008
Posts: 713
I have a 2.5DI-3.0SO muffler, tis a 3.0SI-2.5DO but tis reversible. It was the only one I found that has no baffles in it that would mess up airflow, and from what I saw all Flowmasters have baffles in there, so reversing one will cause some real bad flow and high backpressure. My Muffler is made by Cherry Bomb, is all-welded design, and costs about $90 or so - part #88109, tis the Vortex series, nice and quiet muffler.
M.L.S.C. is offline  
post #10 of 14 (permalink) Old 02-23-2008, 01:00 PM
Fullsize Member
 
MikE2's Avatar
 
Join Date: Jul 2004
Posts: 2,959










Look at these. I wouldn't say the flow would be restricted much at all weather they are installed right or backwards. No mater which way its done, the exhaust still has to be forced through it and find its own way out...if you know what I mean. Its not like a straight through muffler...

I'll bet anything even a dyno couldn't tell if it was installed right or not. I don't think it would sound different either.
MikE2 is offline  
post #11 of 14 (permalink) Old 02-23-2008, 01:49 PM
Lick my balls
 
waltman's Avatar
 
Join Date: Oct 2005
Location: far from reality
Posts: 13,135
Bronco Info: 1989 bronco, 3" suspension lift, rebuilt 302 with cam, 33' big-os
Quote:
Originally Posted by MikE2 View Post










Look at these. I wouldn't say the flow would be restricted much at all weather they are installed right or backwards. No mater which way its done, the exhaust still has to be forced through it and find its own way out...if you know what I mean. Its not like a straight through muffler...

I'll bet anything even a dyno couldn't tell if it was installed right or not. I don't think it would sound different either.
Mike, you don't know what you are talking about. If you install the muffler backwards there will be pockets of turbulance in the peaks of the Vees. In the propper direction there is minimal restriction to flow from the first Vee and the other Vees are pretty much there to create or muffle the sound.

Backwards instalation will create backpressure and restrictions due to all the turbulance created by all the Vees.

there is no such thing as stupid questions, just stupid people.
Only that in you which is me can hear what I'm saying
No matter where you go or what you do, you live your entire life within the confines of your head
I don't suffer from insanity; I enjoy every minute of it

waltman is offline  
post #12 of 14 (permalink) Old 02-23-2008, 03:37 PM Thread Starter
Registered User
 
Join Date: Nov 2007
Posts: 47
I am not going to attempt to use the muffler backwards. I have a pair of Dynomax Bullets that I'll throw on it. I just like the thoughts of one muffler to secure everything and make it easier to hang. I have the DI/DO Flowmaster on my 94 F150 with a 460. It holds the exhaust together nicely and sounds great.
Kellar is offline  
post #13 of 14 (permalink) Old 02-23-2008, 03:43 PM
Registered User
 
M.L.S.C.'s Avatar
 
Join Date: Jan 2008
Posts: 713
Quote:
Originally Posted by Kellar View Post
I am not going to attempt to use the muffler backwards. I have a pair of Dynomax Bullets that I'll throw on it. I just like the thoughts of one muffler to secure everything and make it easier to hang. I have the DI/DO Flowmaster on my 94 F150 with a 460. It holds the exhaust together nicely and sounds great.
You do realize those will be real loud, right? By the way, look up Flowmaster's site, IIRC they do make some DI-DO mufflers for RV and big truck applications.
M.L.S.C. is offline  
post #14 of 14 (permalink) Old 02-23-2008, 04:02 PM
Satyr of the Midwest
 
SigEpBlue's Avatar
 
Join Date: Nov 2005
Location: Ida & Grand Rapids, Michigan, a.k.a The Unemployment Capital of America
Posts: 17,754
Bronco Info: 1993 EB, 5.8L, BIO0 MAF, GT40Ps, Mustang cam, GT40 Intake, Custom Headers, Moates QuarterHorse
Those big'uns are pretty pricey, though. I looked at a few, and a 2.5-inch DI-DO was like $170 IIRC.

SigEpBlue
Wheelin' across Michigan from Ida to Grand Rapids, baby!
Quote:
Nemo nisi per amicitiam cognoscitur -- No one learns except by friendship.
Quote:
Originally Posted by Adlai Stevenson
Isn't it conceivable to you that an intelligent person could harbor two opposing ideas in his mind?
SigEpBlue is offline  
Reply

  FSB Forums > Bronco Discussions > Noobie Bronco Tech Questions. Flame free zone!

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the FSB Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself. DO NOT USE Gmail.com accounts. If you only have a Gmail.com email please contact the administrator here

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome