MILL SUPPLY, Cleveland, OH
Their body parts On-line Store site is
For 1/4's; http://rustrepair.com/PANELS/FORD-92...BED-REPAIR.HTM
98-87-50-LH; LH Complete Rear Quarter, that fits 87-96 Ford Bronco.-detail 87-96 212.50
25.00 Pounds. 75x34x8 inches
This part is too large for UPS and must be shipped Freight.
Lead time is about 11 days.
98-87-50-RH; RH Complete Rear Quarter Panel, that fits 87-96 Ford Bronco.-detail 87-96 212.50
to save $ on a compl 1/4 panel
I bought the 1/4 panel patch panels
They are primed and of 18 gauge steel - exact fit around wheel well arch and packaged very well for shipping.
I ordered it on 6 JUN 2011 @ 1225 hours and received on 8 JUN 2011 !!!
S & H cost for both from Cleveland, OH to NJ was $12.xx
#52 LH Upper wheel arch area 16"H x 40"L 87-98 $29.00 & RH
from the horizontal crease below camper top down to wheel arches and around the arches
exact fit = Will be able to weld w/no adjustments to it or the 1/4
can be attached w/body adhesive or even PL Premium; Sixlitre has been experimenting w/PL Premium on some parts.
Of course, cut the rusted arch section out and inner panel. so you can inspect and clean higher up inside 1/4
Here is my 1/4 panel section in my site http://www.broncolinks.com/index.php?index=459
Replacement w/adhesive including inner wheel house in an 86
Source: by Sixlitre (Malcolm H, Eddie Bauer) at SuperMotors.net
Replacement w/adhesive w/parts list; including wheel house in a 90; Panel Adhesive, $26.00 a tube & Application Gun, $65.00 by wheelersautobody.com , etc.
Source: by Jason T (Broncomx, Two Face) at It's body work time