Rear vinyl seat - FSB Forums
 
LinkBack Thread Tools Display Modes
post #1 of 13 (permalink) Old 12-05-2012, 10:24 PM Thread Starter
Registered User
 
Diesel_Brad's Avatar
 
Join Date: Sep 2012
Posts: 372
Rear vinyl seat

Ok guys, I want to start collecting parts while I am working, so when I am laid off, I can have the items to install.

I have put in a set of 1st gen Lightning buckets and console to replace the beat up original Vinyl buckets. Now I need a vinyl bench to match the buckets(charcoal).
How common were the XL broncos. I assume that was all the vinyl came in. I want to keep the rear seat vinyl, because I plan on leaving the top of 50% of the time and just put in on for the winter to keep snow out while it is parked.

I am also going to need the complete interior in the charcoal as well. I think I have a lead on the door panel and forward. I would still need the B pillars and the rest of the cargo area. WOuld 87-91 parts work in my 96?

2 96 Broncos

96 Bronco XL 302 5spd 6" procomp 35" Dick Cepeks

96 Bronco XLT 302 5spd Stock
Diesel_Brad is offline  
Sponsored Links
Advertisement
 
post #2 of 13 (permalink) Old 12-06-2012, 12:04 AM
Registered User
 
Billy89EB's Avatar
 
Join Date: Jun 2012
Location: Riverside,CA
Posts: 562
Bronco Info: 1987 Eddie Bauer 302, 4" rancho lift, dual magnalfows, 35" Discoverer stt's
Use interior spray paint
Billy89EB is offline  
post #3 of 13 (permalink) Old 12-06-2012, 06:49 AM Thread Starter
Registered User
 
Diesel_Brad's Avatar
 
Join Date: Sep 2012
Posts: 372
Yeah, ........... NO

2 96 Broncos

96 Bronco XL 302 5spd 6" procomp 35" Dick Cepeks

96 Bronco XLT 302 5spd Stock
Diesel_Brad is offline  
post #4 of 13 (permalink) Old 12-06-2012, 09:05 AM
Registered User
 
MudRider's Avatar
 
Join Date: Sep 2011
Location: Northern Michigan
Posts: 219
Bronco Info: 96 XL 302-K&N-3" magnaflow exhaust no cats-33s-locker front+rear-4.10s-E40D-custom bumper-SOFTTOPPER
my 96 XL has cloth benches front and rear..., not vinyl


This mall crawl session was brought to you by a pair of Aussie Lockers.
Ferris State University Automotive Engineering Technology student.
MudRider is offline  
post #5 of 13 (permalink) Old 12-06-2012, 10:03 AM
Forward Some Money
 
j. r. Nice's Avatar
 
Join Date: Mar 2004
Location: Ohio, heart of
Posts: 4,471
Bronco Info: '89 Bronco, 5.8, MAF, Summit shorties, Bassani SS, AOD, Tru-trac posi, Stocker
"Custom" was vinyl. I don't have production stats, but I would guess only about 15% were customs.

As far as interior, the earlier stuff will physically "fit" but the 96 had provisions for stuff the 87-91 didn't....like rear seat belts.
Door panels won't match dash and window vents are different.

Short answer is "no"

Click HERE to visit my frame-off NOS restoration thread.

Photobucket Album ....and a crap load of pictures....
j. r. Nice is offline  
post #6 of 13 (permalink) Old 12-06-2012, 11:19 AM
Banned
 
Steve83's Avatar
 
Join Date: Jul 2003
Location: Memphis, TN
Posts: 40,500
Bronco Info: '83 VIN & title on '93 frame/body w/'95 4.9L & EB paint
Look for '92-93 parts.

Steve83 is offline  
post #7 of 13 (permalink) Old 12-06-2012, 11:49 AM
Registered User
 
scott79's Avatar
 
Join Date: Dec 2009
Location: Bloomington, IN
Posts: 440
Bronco Info: 4-79 Ranger XLT Bronco's, 2-96 EB Bronco's, 4-79 F-150's 4x4, 3-79 F350 SC 4x4, 1997 F350 XLT 4x4 PS
Brad, I have used some different types of vinyl paint to paint interior items and have never been overly impressed with the results. Maybe it was the brand I picked, or the application in which I applied, or just me but if you are looking for a "factory correct" look, I would suggest using replacement parts. IIRC ford went to cloth vs vinyl from 94-96 for their seats... JMO

YESTERDAY WAS ABOUT HONOR, TODAY IS ABOUT JUSTICE
scott79 is offline  
post #8 of 13 (permalink) Old 12-06-2012, 12:05 PM
Fullsize Member
 
Join Date: Jun 2010
Location: Collin county, TX
Posts: 3,669
Bronco Info: Brick Nose on 15x10s/32s with leveling coils
92-93 gray interior panels. never seen a gray vinyl rear seat though
GetBent4x4 is offline  
post #9 of 13 (permalink) Old 12-06-2012, 07:13 PM Thread Starter
Registered User
 
Diesel_Brad's Avatar
 
Join Date: Sep 2012
Posts: 372
Quote:
Originally Posted by GetBent4x4 View Post
92-93 gray interior panels. never seen a gray vinyl rear seat though
Yeah, me neither. Maybe I will have to get the rear bench redone in charcoal

WAHt is different about the 87-91 rear seat?

2 96 Broncos

96 Bronco XL 302 5spd 6" procomp 35" Dick Cepeks

96 Bronco XLT 302 5spd Stock
Diesel_Brad is offline  
post #10 of 13 (permalink) Old 12-07-2012, 09:59 AM
Fullsize Member
 
miesk5's Avatar
 
Join Date: Oct 2003
Location: NJ
Posts: 13,826
Bronco Info: 96 XL 5.0 E4OD, Man Xfer/Hubs
Garage
Quote:
Originally Posted by Diesel_Brad View Post
WAHt is different about the 87-91 rear seat?
92-96 have rear seat shoulder belt mounting points attached to camper top for outboard rear seats.

96 XL 5.0 E4OD, Man Xfer/Hubs
USN & DoD Planner (ret)
THANKS to ALL WHO SERVE!

my broncolinks.com was "disturbed"; but some sections are archived @ [url]http://web.archive.org/web/20121009110424/http://www.broncolinks.com/index.php
select a LINK, Right Click & Hit Properties; copy the second HTTP address; paste in a new browser window or Tab to see original page
miesk5 is offline  
post #11 of 13 (permalink) Old 12-07-2012, 10:15 AM
Fullsize Member
 
miesk5's Avatar
 
Join Date: Oct 2003
Location: NJ
Posts: 13,826
Bronco Info: 96 XL 5.0 E4OD, Man Xfer/Hubs
Garage
dupe reply, please delete

96 XL 5.0 E4OD, Man Xfer/Hubs
USN & DoD Planner (ret)
THANKS to ALL WHO SERVE!

my broncolinks.com was "disturbed"; but some sections are archived @ [url]http://web.archive.org/web/20121009110424/http://www.broncolinks.com/index.php
select a LINK, Right Click & Hit Properties; copy the second HTTP address; paste in a new browser window or Tab to see original page
miesk5 is offline  
post #12 of 13 (permalink) Old 12-07-2012, 01:21 PM
Banned
 
Steve83's Avatar
 
Join Date: Jul 2003
Location: Memphis, TN
Posts: 40,500
Bronco Info: '83 VIN & title on '93 frame/body w/'95 4.9L & EB paint
'78-91 rear seat has 2 on-seat lap belt retractors, 1 manual-adjust center lap belt, & 3 buckles (2 outboard); '92-96 has the same center belt, but 3 mid-seat buckles for shoulder reels on the body.

.

Other than the welded nuts for the '78-91 outboard buckles, the seat itself is the same.

Steve83 is offline  
post #13 of 13 (permalink) Old 12-09-2012, 11:05 AM Thread Starter
Registered User
 
Diesel_Brad's Avatar
 
Join Date: Sep 2012
Posts: 372
Ok, so I can replace the 96 seat with a earlier model one, just not the other way around due to the seat belts

2 96 Broncos

96 Bronco XL 302 5spd 6" procomp 35" Dick Cepeks

96 Bronco XLT 302 5spd Stock
Diesel_Brad is offline  
Reply

  FSB Forums > Bronco Discussions > Noobie Bronco Tech Questions. Flame free zone!

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the FSB Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself. DO NOT USE Gmail.com accounts. If you only have a Gmail.com email please contact the administrator here

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome