OEM tailgate vs. Reproduction from JBG, etc.? - FSB Forums
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 24 (permalink) Old 01-16-2013, 05:50 PM Thread Starter
Registered User
 
Join Date: Jul 2004
Posts: 57
Bronco Info: 67, 70, 73, & 96 DD
OEM tailgate vs. Reproduction from JBG, etc.?

Is a Ford OEM tailgate really any better than a reproduction from say JBG? I do not have a show truck. I just wonder how well a repro will fit, and how much "fitting" will be required vs. the OEM. Thanks.
bosshoff is offline  
Sponsored Links
Advertisement
 
post #2 of 24 (permalink) Old 01-16-2013, 06:27 PM
Registered User
 
Join Date: Nov 2009
Location: Redford, MI
Posts: 2,198
Bronco Info: '96 Black 302 XLT - '94 Green 351 E. B. both are E4OD, 3.55 axles, 31 10.50x15
My original tailgate on my '96 (that I bought new in Oct 1995) lasted until 2001, when it developed about a 2" hole in the bottom, I replaced it with the cheapest tailgate shell I could find, and it lasted until about 2010. So I got 6 years out of the OEM, and about 9 from a reproduction. I think it has more to do with the prep work you do on the replacement, and where you live (I live in the rust belt, salted roads from November to April).
As far as "fitment", everything bolted up just fine, I have an inside spare so I didn't have any issues with the extra support inside the tailgate, and the only PITA was drilling all the holes for the tailgate trim piece (that big stainless piece).
This spring I'm planning on replacing it again, the cheapest I could find is from this place, which just happens to be about 2 miles from me, JBG is only about 25 miles away, so no big deal. I've never bought anything from c2cfabrication, and I have bought a bunch of stuff from JBG.
https://c2cfabrication.com/store/adv...gate&x=55&y=12


Good Luck

"The simplest solution is usually the best solution" - Occam's Razor

"The significant problems we face cannot be solved at the same level of thinking we were at when we created them." - Albert Einstein
Mikey350 is online now  
post #3 of 24 (permalink) Old 01-16-2013, 06:37 PM Thread Starter
Registered User
 
Join Date: Jul 2004
Posts: 57
Bronco Info: 67, 70, 73, & 96 DD
Mikey, how do you suggest prepping the inside of a new tailgate? They already have that crappy black electrostatic primer. Should I top coat it with another primer, paint, and then seal with an antirust wax treatment (Noxudol 750)? Should I strip the primer, and use POR-15? Undercoating, Line-X? What do you guys think is best?
bosshoff is offline  
post #4 of 24 (permalink) Old 01-16-2013, 06:40 PM
Banned
 
Steve83's Avatar
 
Join Date: Jul 2003
Location: Memphis, TN
Posts: 40,500
Bronco Info: '83 VIN & title on '93 frame/body w/'95 4.9L & EB paint
The factory parts are probably better if you can find them in nearly-new condition (little rust, few dents, no mods). But obviously, it's easier to find new repros in that condition if you've got the ca$h. If you find a useable original, strip EVERYTHING out of it, and wash it thoroughly before making any repairs. For either, it's critical to undercoat &/or paint the inside. If you have a swingaway, you should also reinforce the R side top before painting. Click my black Bronco in my sig & read the captions in the Tailgate Tech album, and the Right Side Split album.

This thread describes aligning a Bronco t/g:
http://www.fourdoorbronco.com/board/...gate-Alignment
Steve83 is offline  
post #5 of 24 (permalink) Old 01-16-2013, 06:45 PM
Registered User
 
Join Date: Nov 2009
Location: Redford, MI
Posts: 2,198
Bronco Info: '96 Black 302 XLT - '94 Green 351 E. B. both are E4OD, 3.55 axles, 31 10.50x15
When I replaced my core support (on the '94), I called the POR-15 guys, and they told me that POR-15 only works well on bare metal, and that I should just wipe off the new core support with some of their "Marine Prep" stuff to get rid of any oil, then shoot the heck out of it with Rustoleum, or any other topcoat.
When I did my tailgate, I just sprayed the acrylic enamel (liberally) on the inside, outside, everywhere. Like I said, it lasted about 9 years.

"The simplest solution is usually the best solution" - Occam's Razor

"The significant problems we face cannot be solved at the same level of thinking we were at when we created them." - Albert Einstein
Mikey350 is online now  
post #6 of 24 (permalink) Old 01-16-2013, 06:49 PM
Registered User
 
f150inline's Avatar
 
Join Date: Mar 2012
Location: Berwyn, PA
Posts: 560
Bronco Info: 96 F150 (soon to be sold) 94 bronco, stock for now
scuff it and then por15 it on the inside.

94 Bronco http://www.fullsizebronco.com/forum/...74#post5397874

96 f150 straight 6, d44 SAS, 4.56s, Aussie lockers, 35 inch mtrs.
f150inline is offline  
post #7 of 24 (permalink) Old 01-16-2013, 08:29 PM
Registered User
 
war1ock's Avatar
 
Join Date: Aug 2012
Location: Dearborn County IN
Posts: 157
Bronco Info: 1980 300 I6 4spd/1981 302 C6
The couple of repro tailgates ive dealt with have been up to par. I spray the inside with an auto body rustproofer.
war1ock is offline  
post #8 of 24 (permalink) Old 01-16-2013, 08:59 PM
Registered User
 
whiteboysbronco's Avatar
 
Join Date: Dec 2012
Location: WA
Posts: 55
Bronco Info: 92 FORD BRONCO EB( 5.8, 351) knn cold air,6 in lift,35 in super swampers, flow master full exhaust
I found some great ones on eBay for 220... Check them out there!!!
whiteboysbronco is offline  
post #9 of 24 (permalink) Old 06-29-2013, 06:48 PM
Registered User
 
Join Date: Apr 2005
Location: Gulf Shores Alabama
Posts: 37
Bronco Info: 1994 Eddie Bauer 5.8
So is it possible to find a new OEM tailgate for a '94 that doesn't cost an arm and a leg?
Watchman is offline  
post #10 of 24 (permalink) Old 06-30-2013, 04:39 AM
Banned
 
Steve83's Avatar
 
Join Date: Jul 2003
Location: Memphis, TN
Posts: 40,500
Bronco Info: '83 VIN & title on '93 frame/body w/'95 4.9L & EB paint
Let us know when you find one.
Steve83 is offline  
post #11 of 24 (permalink) Old 06-30-2013, 10:11 AM
Registered User
 
Join Date: Apr 2005
Location: Gulf Shores Alabama
Posts: 37
Bronco Info: 1994 Eddie Bauer 5.8
Quote:
Originally Posted by Steve83 View Post
Let us know when you find one.
Well you said 'when' instead of 'if' so I'm encouraged to keep looking!
Watchman is offline  
post #12 of 24 (permalink) Old 06-30-2013, 11:24 AM
Registered User
 
Join Date: Jun 2013
Location: Arkansas
Posts: 126
Bronco Info: 1995 XLT 5.0 Auto
I'm glad I'm not in the rust belt. My tail gate has NO rust.... but has a huge dent in it. Looking into one as well

1995 XLT 5.0 Auto
Foxbodyford is offline  
post #13 of 24 (permalink) Old 06-30-2013, 01:03 PM
Banned
 
Steve83's Avatar
 
Join Date: Jul 2003
Location: Memphis, TN
Posts: 40,500
Bronco Info: '83 VIN & title on '93 frame/body w/'95 4.9L & EB paint
There are still good t/gs in the JYs - I run across them occasionally, and I always buy them. I think I have 3 or 4 in my junkpile right now.
Steve83 is offline  
post #14 of 24 (permalink) Old 06-30-2013, 03:40 PM
Registered User
 
AZ_Johnny's Avatar
 
Join Date: Nov 2011
Location: Phoenix, AZ
Posts: 89
Bronco Info: 1996 Bronco XL, 302 V8, M5OD, Flowmaster exhaust, Warn Premium Hubs. 4.10 gears, rear ARB locker
If you are up for a road trip to Arizona you will find plenty, I can think of 3 or 4 Broncos with perfect, rust free tailgates sitting in yards around Phoenix waiting for the crusher.
AZ_Johnny is offline  
post #15 of 24 (permalink) Old 06-30-2013, 06:49 PM
Registered User
 
Join Date: Apr 2005
Location: Gulf Shores Alabama
Posts: 37
Bronco Info: 1994 Eddie Bauer 5.8
I haven't had much luck in the JYs. When I manage to find one they seem to be smashed or rusted. I'd rather not do a shell if I can help it but I'm slowly running out of options...
Watchman is offline  
post #16 of 24 (permalink) Old 06-30-2013, 11:38 PM
Banned
 
Steve83's Avatar
 
Join Date: Jul 2003
Location: Memphis, TN
Posts: 40,500
Bronco Info: '83 VIN & title on '93 frame/body w/'95 4.9L & EB paint
Install GoogleEarth and fly around your area searching for "auto salvage" or "scrap" or "junkyard" or "used parts". You might be surprised what's nearby. Just pay attention to the imagery dates in the lower L.
Steve83 is offline  
post #17 of 24 (permalink) Old 06-30-2013, 11:58 PM
not banned
 
Join Date: Sep 2006
Location: Sun Diego, CA
Posts: 5,972
Bronco Info: 82 XLT Lariat, 351W, C6, NP208, 4.56:1, 37x13.5s, all sheet metal replaced
i had mine powder coated inside and out, straight off the crate from JBG.

Where we go one, we go all.
Mickaila's Rebuild

Quote:
Originally Posted by Redwagon View Post
I guess most of our members are just WEB WHEELERs and dont need public land?
mickaila is offline  
post #18 of 24 (permalink) Old 07-01-2013, 07:46 AM
Registered User
 
Join Date: Apr 2005
Location: Gulf Shores Alabama
Posts: 37
Bronco Info: 1994 Eddie Bauer 5.8
Quote:
Originally Posted by Steve83 View Post
Install GoogleEarth and fly around your area searching for "auto salvage" or "scrap" or "junkyard" or "used parts". You might be surprised what's nearby. Just pay attention to the imagery dates in the lower L.
That was a great idea, I found a small local (and totally unadvertised) yard 6 miles from where I live that has a '93. He said it was in a wreck and the front end is smashed but the tailgate might be good. Headed over there today, maybe there is a pot of gold right out my back door!
Watchman is offline  
post #19 of 24 (permalink) Old 07-04-2013, 09:31 AM
Registered User
 
Join Date: Apr 2005
Location: Gulf Shores Alabama
Posts: 37
Bronco Info: 1994 Eddie Bauer 5.8
Got a chance to check that gate out, swing and a miss. It was pretty well rusted along the bottom and it looked like the brackets inside the shell were about to break loose.

Still on the hunt for a gate.

It did have a few other minor parts that were in great shape and the guy just about gave them to me so it was a worthwhile visit...
Watchman is offline  
post #20 of 24 (permalink) Old 07-04-2013, 06:41 PM
Registered User
 
jfourdyce's Avatar
 
Join Date: Nov 2011
Location: Flagstaff, Arizona
Posts: 271
Bronco Info: 1989 Eddie Bauer 5.8, C6, basically stock DD.
I bought a JBG tailgate and had it painted inside and out by my local body shop. Bolted right up after I got it back from the paint shop.
jfourdyce is offline  
Reply

  FSB Forums > Bronco Discussions > Noobie Bronco Tech Questions. Flame free zone!

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the FSB Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself. DO NOT USE Gmail.com accounts. If you only have a Gmail.com email please contact the administrator here

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome