Windshield Molding lower clips - Ford Bronco Forum
 
LinkBack Thread Tools Display Modes
post #1 of 10 (permalink) Old 02-13-2013, 10:29 PM Thread Starter
Fullsize Member
 
JScatt's Avatar
 
Join Date: Jan 2010
Location: SoCal
Posts: 4,770
Bronco Info: 1995 XLT 351W, 2.5 R/C Lift,4.10's, Rancho Extended R/As, 33's, Punisher Valve Body
Windshield Molding lower clips

Ok, so I need to start getting my windshield molding back on.
The bottom clips seem to be a two piece type clip, a metal clip that is riveted to the body and a plastic piece that goes into the molding then snaps into the clip that is riveted below the windshield....is that right?
Anyway the plastic pieces on mine are ALL broken and don't seem to be available.
I will have to hit the junkyard, how are these clips released from the molding?

LMC Truck does sell the lower clips but they do not include the plastic piece.

No bum that can't speak poifect English oughta stay in this country...oughta be de-exported the hell outta here!"

-Archie Bunker

bron·co/ˈbräNGkō/
Noun:
A wild or half-tamed horse, esp. of the western US.
JScatt is online now  
Sponsored Links
Advertisement
 
post #2 of 10 (permalink) Old 02-13-2013, 10:45 PM
not banned
 
Join Date: Sep 2006
Location: Sun Diego, CA
Posts: 6,005
Bronco Info: 82 XLT Lariat, 351W, C6, NP208, 4.56:1, 37x13.5s, all sheet metal replaced
i don't remember exactly.
i do recall having an understanding after looking through one of Steve83's threads/ SM pages.

i THINK i might have even bought some old clips from him, but its been so long i could be wrong on that too.

Where we go one, we go all.
Mickaila's Rebuild

Quote:
Originally Posted by Redwagon View Post
I guess most of our members are just WEB WHEELERs and dont need public land?
mickaila is offline  
post #3 of 10 (permalink) Old 02-13-2013, 10:53 PM
Thread Killa
 
jowens1126's Avatar
 
Join Date: Jan 2011
Location: Orlando, FL
Posts: 7,997
Bronco Info: 1994 Bronco Eddie Bauer edition, 302 MAF, E4OD
The Tint shop I went and got an estimate from had both clips. check with one of those guys.

1994 EB Bronco, 302 MAF, E4OD, BW1356, Slightly Customized Interior
"Demanding something free on top of a discount is just being a Democrat. - Steve83"

My Build Thread - http://www.fullsizebronco.com/forum/...d.php?t=191067
jowens1126 is offline  
post #4 of 10 (permalink) Old 02-13-2013, 10:55 PM Thread Starter
Fullsize Member
 
JScatt's Avatar
 
Join Date: Jan 2010
Location: SoCal
Posts: 4,770
Bronco Info: 1995 XLT 351W, 2.5 R/C Lift,4.10's, Rancho Extended R/As, 33's, Punisher Valve Body
I looked through Steve's windshield pages and saw nor read any mention of these damn plastic pieces

No bum that can't speak poifect English oughta stay in this country...oughta be de-exported the hell outta here!"

-Archie Bunker

bron·co/ˈbräNGkō/
Noun:
A wild or half-tamed horse, esp. of the western US.
JScatt is online now  
post #5 of 10 (permalink) Old 02-14-2013, 01:10 AM
Banned
 
Steve83's Avatar
 
Join Date: Jul 2003
Location: Memphis, TN
Posts: 40,490
Bronco Info: '83 VIN & title on '93 frame/body w/'95 4.9L & EB paint
Quote:
Originally Posted by JScatt View Post
...a metal clip that is riveted to the body...is that right?
No. The posts are welded or riveted to the body; the metal clip clips onto 2 posts. Follow the links in this caption:

Quote:
Originally Posted by JScatt View Post
...the plastic pieces...don't seem to be available.
They're not.
Quote:
Originally Posted by JScatt View Post
how are these clips released from the molding?
They're not.

You'd have to un-bend all the crimps that keep the tabs in position along the trim to be able to slide them. Find a lower trim with good tabs and don't break them. I prefer the '94-96 black trim, but I just hate shiny stuff.
Steve83 is offline  
post #6 of 10 (permalink) Old 02-14-2013, 08:41 PM
Registered User
 
bluesuper74's Avatar
 
Join Date: May 2010
Location: Jackson Mi.
Posts: 271
Bronco Info: 1987 Bronco xlt, 5.0/C6 bone stock
will Any of these work?
http://rustrepair.com/panels/WINDSHI...EVEAL-FORD.HTM

Or these
http://rustrepair.com/panels/WINDOW-...PS-GM-FORD.HTM

Site has some other cool stuff too.


Quote:
Originally Posted by Andrew James
What's wrong with your TTB?
Quote:
Originally Posted by KLAKEBRONCO Nothing. But if we all could leave things well enough alone there wouldn't be any forum.
bluesuper74 is offline  
post #7 of 10 (permalink) Old 02-14-2013, 09:23 PM Thread Starter
Fullsize Member
 
JScatt's Avatar
 
Join Date: Jan 2010
Location: SoCal
Posts: 4,770
Bronco Info: 1995 XLT 351W, 2.5 R/C Lift,4.10's, Rancho Extended R/As, 33's, Punisher Valve Body
Quote:
Originally Posted by Steve83 View Post
No. The posts are welded or riveted to the body; the metal clip clips onto 2 posts. Follow the links in this caption:

They're not.They're not.

You'd have to un-bend all the crimps that keep the tabs in position along the trim to be able to slide them. Find a lower trim with good tabs and don't break them. I prefer the '94-96 black trim, but I just hate shiny stuff.
Which crimps do I need to un-bend?

No bum that can't speak poifect English oughta stay in this country...oughta be de-exported the hell outta here!"

-Archie Bunker

bron·co/ˈbräNGkō/
Noun:
A wild or half-tamed horse, esp. of the western US.
JScatt is online now  
post #8 of 10 (permalink) Old 02-15-2013, 03:49 AM
Banned
 
Steve83's Avatar
 
Join Date: Jul 2003
Location: Memphis, TN
Posts: 40,490
Bronco Info: '83 VIN & title on '93 frame/body w/'95 4.9L & EB paint
Quote:
Originally Posted by JScatt View Post
Quote:
Originally Posted by Steve83 View Post
You'd have to un-bend all the crimps ... along the trim...
Which crimps do I need to un-bend?
Have you looked closely at the part you removed?
Steve83 is offline  
post #9 of 10 (permalink) Old 02-15-2013, 10:38 AM Thread Starter
Fullsize Member
 
JScatt's Avatar
 
Join Date: Jan 2010
Location: SoCal
Posts: 4,770
Bronco Info: 1995 XLT 351W, 2.5 R/C Lift,4.10's, Rancho Extended R/As, 33's, Punisher Valve Body
No, not really. The guy doing my body work took the molding off when I wasn't there...asked him to wait for me...then handed me a bunch of broken plastic pieces

No bum that can't speak poifect English oughta stay in this country...oughta be de-exported the hell outta here!"

-Archie Bunker

bron·co/ˈbräNGkō/
Noun:
A wild or half-tamed horse, esp. of the western US.
JScatt is online now  
post #10 of 10 (permalink) Old 02-15-2013, 11:27 AM
Banned
 
Steve83's Avatar
 
Join Date: Jul 2003
Location: Memphis, TN
Posts: 40,490
Bronco Info: '83 VIN & title on '93 frame/body w/'95 4.9L & EB paint
Then I'd let HIM replace it. He wanted to handle it alone - LET HIM.
Steve83 is offline  
Reply

  Ford Bronco Forum > Bronco Discussions > Noobie Bronco Tech Questions. Flame free zone!

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Bronco Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself. DO NOT USE Gmail.com accounts. If you only have a Gmail.com email please contact the administrator here

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome