Center console 95 FSB - Ford Bronco Forum
 27Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 27 (permalink) Old 05-15-2017, 11:09 PM Thread Starter
Registered User
 
Join Date: May 2017
Posts: 9
Bronco Info: 1995 Bronco XLT Red, red and more red. 351 with auto hubs
iTrader: (0)
Center console 95 FSB

Greetings. I am a long term Ford fan and have rebuilt several EB Broncos but am new to the Full Size Broncos. I just got my first FSB and am looking for some parts or guidance.

In this thread I am looking for quality center console. I would prefer an OEM grey one but open to suggestions. Any help/suggestions would be greatly appreciated.

Thanks in advance.
dash_cam likes this.
BigSwedeBronco is offline  
Sponsored Links
Advertisement
 
post #2 of 27 (permalink) Old 05-16-2017, 12:34 AM
Harley's & Bronco's FTW!
 
BikerPepe`'s Avatar
 
Join Date: Feb 2003
Location: N.E. WA
Posts: 32,712
Bronco Info: '95 XLT, 5.8/E4OD/MassAir/6" lift/4.56's/35x12.5 BFG AT-KO2
iTrader: (4)
Garage
damn. I would have probably picked that up off ya @Mlyczewski , if you put it in the FS section w/pics/details and all that.

@BigSwedeBronco - Welcome to FSB. I can see you didn't read any of the "Welcome to FSB" stuff... but I will tell you that sales aren't allowed around here outside our For Sale area and you can't get there before you get 75 posts. Nothing personal... just to much BS here in the past and not a bit since the rule was initiated.
Now that's just FYI. I'm retired and don't work on the staff here anymore... so, good luck with that.


thread vanish in 3.... 2... 1...
IBTL.



oh wow. I didn't realize you're all over the place. ok... well.
not a good start.

"When life throws you a curve... LEAN INTO IT!"

SuperMotors - Since 2002

Last edited by BikerPepe`; 05-16-2017 at 12:37 AM.
BikerPepe` is online now  
post #3 of 27 (permalink) Old 05-16-2017, 09:21 AM
Moderator
 
miesk5's Avatar
 
Join Date: Oct 2003
Location: NJ
Posts: 17,368
Bronco Info: 96 Bronco XL 5.0 E4OD, Man Xfer/Hubs
iTrader: (2)
Garage
Yo BigSwedeBronco,
As Pepe' advised those are the rules.
Let's turn this around and give you sources other than here:
For a YARD SEARCH on-line, I use;
http://www.hollanderparts.com/
A yard that uses Hollander Interchange can search other yards and have it shipped.
Can select certain parts
Has Vehicle Pics! They show about 3 - 5 pics for some vehicles
I Searched: 1995 >Ford > Bronco > Interior > Console, Front > Alternate Console, Front
For example:

$40.17 Ship for $10.00 Excellent Condition (Grade A) B & R Auto Wrecking CHEH
Graham, WA Buy or View Details
Or;

Call For Price Excellent Condition (Grade A) Mileage 165,000 West Edge Auto Salvage
Independence, IA Buy or View Details
.

Call For Price Excellent Condition (Grade A) Mileage 197,000 D & L Truck Parts Junction City, OR
Buy or View Details
.

Call For Price Excellent Condition (Grade A) Southwest Auto Salvage Lockport, IL Buy or View Details
Etc.
...

or
CoPartfinder - Your guide to Auto Parts on the Internet
Has Vehicle Pics! They show about 4 - 5 pics per vehicle incl. interior/dash, back seat, front & rear and engine bay.
Can search by year range, such as 92 through 96
Has Vehicle Pics! They show about 4 -
Can NOT Select certain parts
...

Car-Part.com--Used Auto Parts Market
Can select certain parts
Can search by year range, such as 92 through 96 & has best item condition descriptions such as "COVER BAD LEATHER PWR BKT GRY"
Has Some Vehicle Pics! They show about 4 - 8 pics per vehicle incl. interior/dash, back seat, front & rear and engine bay
1992 - 1996 Ford Bronco (Full Size) Front Console Non-Interchange search for years: 1992-1996
Many results such as;

https://wsimgproky.car-part.com/3421...360_20_web.jpg
...

Pick-n-Pull Home
This is a Company name w/yard locations in various states
Can NOT Select certain parts

Row52 | Search Results
Can NOT Select certain parts
Has Vehicle Pics AND Want a Part? It's Easy...
1. You create a Parts Wanted Listing.
2. Parts Pullers respond with offers.
3. You pick the best one.
A Parts Puller gets the parts you need.

****

for obsolete parts by Ford long version pn:
http://www.partsvoice.com/
Automotive Parts Search | RearCounter.com | Auto Parts Marketplace
Main

&
https://consumerlink.oeconnection.com/91554453363118850 (suggested by JScatt!)

For a locking steel console, consider Tuffy.@ https://www.tuffyproducts.com/e-mmyproducts.aspx
I have one and it is great esp. when you need to secure valuables.
Powdercoating has lasted extremely well despite abuse.
12.5" model is a perfect fit.
Check around for prices...some stores sell them cheaper than the Tuffy site.
Some pics in my SF Bronco site for console's location relative to driver's seat.



driver's seat fully forward to show location

again, fully forward to show front of console's location
...
also, to get accurate info when posting Qs, soon in your profile, include your year, Model (XLT, etc.) engine size; transmission, transfer case, locking hub types and any major mods such as body or suspension lift.
BikerPepe` likes this.

See my partially recovered Bronco web site ...Will need to clean up dead links & add many more new links some day. Thanks to Mr. Schwim!
THANKS to ALL WHO SERVE!

Last edited by miesk5; 05-16-2017 at 09:48 AM.
miesk5 is online now  
 
post #4 of 27 (permalink) Old 05-16-2017, 10:29 AM Thread Starter
Registered User
 
Join Date: May 2017
Posts: 9
Bronco Info: 1995 Bronco XLT Red, red and more red. 351 with auto hubs
iTrader: (0)
Thank you @miesk5 and sorry @bikerpepe. I was looking for help finding parts not starting classified adds. Dumb rookies!
BikerPepe` and miesk5 like this.
BigSwedeBronco is offline  
post #5 of 27 (permalink) Old 05-16-2017, 10:46 AM
Moderator
 
miesk5's Avatar
 
Join Date: Oct 2003
Location: NJ
Posts: 17,368
Bronco Info: 96 Bronco XL 5.0 E4OD, Man Xfer/Hubs
iTrader: (2)
Garage
Yo,
It happens. I believe you missed the FSB newbie FAQ & important information
information when you regiistered here.
GL!

See my partially recovered Bronco web site ...Will need to clean up dead links & add many more new links some day. Thanks to Mr. Schwim!
THANKS to ALL WHO SERVE!
miesk5 is online now  
post #6 of 27 (permalink) Old 05-16-2017, 10:46 AM
Registered User
 
elpancho's Avatar
 
Join Date: Jul 2016
Location: Los Angeles
Posts: 188
Bronco Info: 1996, 351W, E4OD, BFG 33x12.5 KM2, 15x10 Pro Comp, JBG Level Kit
iTrader: (0)
You can also get a Center Console from an Expedition. It's pretty cool, it has Four Cup Holders and a pretty big storage compartment. I got a gray Console from an Expedition on my '96.

1996 Ford Bronco XLT
2001 Ford Mustang SVT Cobra
2003 Suzuki LT-Z400

elpancho is online now  
post #7 of 27 (permalink) Old 05-16-2017, 11:16 AM
Registered User
 
BigBlue 94's Avatar
 
Join Date: May 2006
Location: Hoyt, Kansas
Posts: 2,934
Bronco Info: 85 Bronco, 306ci I6 w/4bbl, np435, 4" lift, 37" Irok NDs, 4.56 w/ Detroit Locker and tru trac
iTrader: (0)
Garage
Just dont get one from a 78-91... they suck at holding drinks. Ive got a tuffy console in mine

Bronco graveyard is the cheapest ive found for a tuffy, at almost $100 less than 4wp

94 Bronco XLT. Beefy 351, 6" , 37's, 4.88: burnt
85 Bronco custom, 4" 37's, locked 4.56, 300 i6 4 bbl, np435/208
96 f350 XL, rclb, 351, c6, BW4407 xfer
78 f150 Ranger, 351m, t18, np205, rusty
90 f150, 95 f250, 96 f350 psd: stolen, sold, and burnt, respectively.

Last edited by BigBlue 94; 05-16-2017 at 11:39 AM. Reason: Added info
BigBlue 94 is online now  
post #8 of 27 (permalink) Old 05-16-2017, 11:35 AM
Bronco Snob
 
RicoBronco's Avatar
 
Join Date: May 2012
Location: Spokane
Posts: 1,354
Bronco Info: 1992 XLT 351W E4OD 4" lift TRE flip 130 amp 3G Alt Saginaw P.S. BFG MT KM2 315 75 16
iTrader: (0)
Garage
Here's my Expedition center con with shifter. (what a lil pic whore I am)




Click image for larger version

Name:	14565372046609 (Copy).jpg
Views:	207
Size:	46.5 KB
ID:	105082
BikerPepe`, BigBlue 94 and Teal94 like this.

A society that puts equality before freedom will get neither. A society that puts freedom before equality will get a higher degree of both. - Milton Friedman -
RicoBronco is offline  
post #9 of 27 (permalink) Old 05-16-2017, 11:38 AM
Registered User
 
BigBlue 94's Avatar
 
Join Date: May 2006
Location: Hoyt, Kansas
Posts: 2,934
Bronco Info: 85 Bronco, 306ci I6 w/4bbl, np435, 4" lift, 37" Irok NDs, 4.56 w/ Detroit Locker and tru trac
iTrader: (0)
Garage
That looks factory, Rico! Nice work.
RicoBronco likes this.

94 Bronco XLT. Beefy 351, 6" , 37's, 4.88: burnt
85 Bronco custom, 4" 37's, locked 4.56, 300 i6 4 bbl, np435/208
96 f350 XL, rclb, 351, c6, BW4407 xfer
78 f150 Ranger, 351m, t18, np205, rusty
90 f150, 95 f250, 96 f350 psd: stolen, sold, and burnt, respectively.
BigBlue 94 is online now  
post #10 of 27 (permalink) Old 05-16-2017, 11:55 AM
Registered User
 
Red95's Avatar
 
Join Date: Oct 2016
Location: Dinwidde County
Posts: 1
Bronco Info: 302 shorty headers mass air K&N cold air 411 truetrac 35 BFGs
iTrader: (0)
Garage
Here is a pic of my 95 with a console from a 04 F150


Everything is BTRWNWT
"Better When Wet"
Red95 is offline  
post #11 of 27 (permalink) Old 05-16-2017, 12:56 PM
Registered User
 
dash_cam's Avatar
 
Join Date: Nov 2014
Location: dallas tx
Posts: 1,403
Bronco Info: 1996 EB, 351w, basically stock. 1981 custom 351m, long gone.
iTrader: (1)
Garage
is this a "show unsolicited pics of your console" thread now?

this is my tuffy console with front and rear cup holders, plus a slot for the radio which i use for a CB. ignore the carpet.


miesk5 likes this.

it's fun to do bad things

my "build" thread
dash_cam is offline  
post #12 of 27 (permalink) Old 05-16-2017, 01:39 PM
Registered User
 
Teal94's Avatar
 
Join Date: Sep 2016
Posts: 127
iTrader: (0)
Quote:
Originally Posted by RicoBronco View Post
Here's my Expedition center con with shifter. (what a lil pic whore I am)




Attachment 105082
Holy hell, that looks awesome. Do you happen to have a write-up on the install?
Mlyczewski likes this.

94' 302, e4od, 1356m, Manual hubs 33x12.5 tires. Fiberworx 4.5 inch flared fiberglass fenders/bedsides. Sag pump/4blt steering box swap in progress
Monotone Medium Calypso Green

Matching set
Teal94 is online now  
post #13 of 27 (permalink) Old 05-16-2017, 02:15 PM
Harley's & Bronco's FTW!
 
BikerPepe`'s Avatar
 
Join Date: Feb 2003
Location: N.E. WA
Posts: 32,712
Bronco Info: '95 XLT, 5.8/E4OD/MassAir/6" lift/4.56's/35x12.5 BFG AT-KO2
iTrader: (4)
Garage
Quote:
Originally Posted by Teal94 View Post
Holy hell, that looks awesome. Do you happen to have a write-up on the install?
yes, he does and it's a pretty good one too.
BronXpedition Center Console
RicoBronco and Teal94 like this.

"When life throws you a curve... LEAN INTO IT!"

SuperMotors - Since 2002
BikerPepe` is online now  
post #14 of 27 (permalink) Old 05-16-2017, 04:26 PM
Registered User
 
fodder's Avatar
 
Join Date: Mar 2017
Location: PNW
Posts: 302
Bronco Info: '92 Sport 5.0
iTrader: (0)
Garage
Quote:
Originally Posted by dash_cam View Post
is this a "show unsolicited pics of your console" thread now?
Stock '92-96 console in a '92 that didn't come with one:



Wait, not that pic...



Sorry, I couldn't resist. :)
RicoBronco likes this.
fodder is offline  
post #15 of 27 (permalink) Old 05-16-2017, 04:31 PM
Registered User
 
Join Date: Mar 2017
Location: Auburn, CA
Posts: 73
Bronco Info: 90 w/a 95 roller 351 auto, E40d, manual 1356, Warn hubs, skyjacker kit, fully locked
iTrader: (0)
Kinda looks like a penis cross
dash_cam and fodder like this.
michael.pennock.79 is offline  
post #16 of 27 (permalink) Old 05-16-2017, 04:38 PM
Bronco Snob
 
RicoBronco's Avatar
 
Join Date: May 2012
Location: Spokane
Posts: 1,354
Bronco Info: 1992 XLT 351W E4OD 4" lift TRE flip 130 amp 3G Alt Saginaw P.S. BFG MT KM2 315 75 16
iTrader: (0)
Garage
It's the new gender symbol for Christian Male W/ a Set

Click image for larger version

Name:	malechristian.jpg
Views:	169
Size:	35.1 KB
ID:	105090
BigBlue 94, dash_cam and fodder like this.

A society that puts equality before freedom will get neither. A society that puts freedom before equality will get a higher degree of both. - Milton Friedman -
RicoBronco is offline  
post #17 of 27 (permalink) Old 05-17-2017, 01:10 PM
Registered User
 
drdoominator420's Avatar
 
Join Date: Jan 2015
Location: Endicott, NY
Posts: 115
Bronco Info: 89 bronco 4" lift, 35s, rebuilt trac lok rear, 4.56s, 98 exploder 5.0 4r70w and electronics
iTrader: (0)
The 86-91 consoles have great storage, but you need to watch the cup holders. Some have deep normal cup holders, some have shallow ones that mostly work well for collecting your spare change. The Eddie Bauer ones seem to have the deep cup holder in most of them

Sent from my Z981 using Tapatalk
drdoominator420 is offline  
post #18 of 27 (permalink) Old 05-17-2017, 05:12 PM
Registered User
 
Join Date: May 2017
Location: Mississippi
Posts: 6
Bronco Info: 1996 XLT
iTrader: (0)
I had one from a 2006 Expedition installed in my 1996. Also, had a touch screen radio (double din)installed in the front slanted storage area---very clean factory look.
96BR0NC0 is offline  
post #19 of 27 (permalink) Old 05-18-2017, 08:35 PM
Registered User
 
TexasAxMan's Avatar
 
Join Date: Jul 2016
Location: Houston
Posts: 34
Bronco Info: 95 Bronco, Auto, Auto Hubs, Stock
iTrader: (0)
The single best thing I did was to build a 6.25" riser for my console, puts it at the same height as the arm rests. But, I HATE the useless cupholders.

I want a factory looking (and feeling) one that is of a decent size, with real cup holders (preferably for front and back passengers) without the floor shift. I like that expedition one, but don't want to mess with a floor shifter. But if I find one in decent shape, I'll probable jump on it.

1995 Bronco XLT
351, Auto
Auto Hubs, Stock TC
Stock Height w/ Leveling Springs
TexasAxMan is offline  
post #20 of 27 (permalink) Old 05-19-2017, 12:14 AM
Harley's & Bronco's FTW!
 
BikerPepe`'s Avatar
 
Join Date: Feb 2003
Location: N.E. WA
Posts: 32,712
Bronco Info: '95 XLT, 5.8/E4OD/MassAir/6" lift/4.56's/35x12.5 BFG AT-KO2
iTrader: (4)
Garage
since all the "console" options are coming out... here's my contribution.

po installed this jump seat in my '95. I thought it would be pretty sweet at the time.
since then, I like the idea of it more than the one I've got.
storage is only deep enough to hold a large measuring tape and a clipboard. the cup-holders don't fit anything I use.



it sits at the perfect height though.
If you needed to use the "seat" part of it often enough and drink out of those steel driving coffee mugs, you might dig it.

"When life throws you a curve... LEAN INTO IT!"

SuperMotors - Since 2002
BikerPepe` is online now  
Reply

  Ford Bronco Forum > Bronco Discussions > Noobie Bronco Tech Questions. Flame free zone!

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Bronco Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself. DO NOT USE Gmail.com accounts. If you only have a Gmail.com email please contact the administrator here

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome