Dallas Junkyard report - Ford Bronco Forum
 1Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 27 (permalink) Old 05-02-2013, 09:30 PM Thread Starter
Fullsize Member
 
Join Date: Jun 2010
Location: Collin county, TX
Posts: 3,718
Bronco Info: Brick Nose on 15x10s/32s with leveling coils
iTrader: (2)
Dallas Junkyard report

dallas south pick n pull -1994 f-250 should be roller 351, 4x4 zf5, 1356 t-case 4.10s diffs. and 4" new rancho lift. http://www.roughcountry.com/suspensi...0_80-98_4.html
http://row52.com/Vehicle/Index/2FTHF26H9RCA78941



lots of roller 302s and gt40 and gt40p headed 5.0 explorers. Several newer reman ac compressors for 90+ trucks.
GetBent4x4 is offline  
Sponsored Links
Advertisement
 
post #2 of 27 (permalink) Old 05-02-2013, 10:28 PM
Fullsize Member
 
ruger1022's Avatar
 
Join Date: May 2005
Location: Euless, Texas
Posts: 724
Bronco Info: 79, Bored 351m, Wieand 4BBL, DUI Diz, Iske Cam, Heddman Headers, Magnaflow Duals, 3G, Saginaw Pump
iTrader: (4)
Nice,which yard? Hope you were able to pick it up at a decent price

If there are no dogs in Heaven, then when I die I want to go where they went.
-Will Rogers
ruger1022 is offline  
post #3 of 27 (permalink) Old 05-02-2013, 11:50 PM Thread Starter
Fullsize Member
 
Join Date: Jun 2010
Location: Collin county, TX
Posts: 3,718
Bronco Info: Brick Nose on 15x10s/32s with leveling coils
iTrader: (2)
no I posted it for someone else to get. I don't have any use for a ttb leaf sprung lift. Address is in the link above.
GetBent4x4 is offline  
 
post #4 of 27 (permalink) Old 05-17-2013, 10:42 PM Thread Starter
Fullsize Member
 
Join Date: Jun 2010
Location: Collin county, TX
Posts: 3,718
Bronco Info: Brick Nose on 15x10s/32s with leveling coils
iTrader: (2)
http://row52.com/Vehicle/Index/1FTHF25H6TEA64305
clean roller 351.

no signs of sludge
GetBent4x4 is offline  
post #5 of 27 (permalink) Old 05-17-2013, 10:53 PM Thread Starter
Fullsize Member
 
Join Date: Jun 2010
Location: Collin county, TX
Posts: 3,718
Bronco Info: Brick Nose on 15x10s/32s with leveling coils
iTrader: (2)
http://row52.com/Vehicle/Index/1FTEX15N5KKA63940
looked like summit racing headers and mr gasket aluminum valve covers.
GetBent4x4 is offline  
post #6 of 27 (permalink) Old 05-30-2013, 01:45 AM Thread Starter
Fullsize Member
 
Join Date: Jun 2010
Location: Collin county, TX
Posts: 3,718
Bronco Info: Brick Nose on 15x10s/32s with leveling coils
iTrader: (2)
http://row52.com/Vehicle/Index/U15SLEH8894
79 bronco...d44 front

july 3rd update. D44 still there, tailgate has dents on the bottom but is still solid. some bubbles.
GetBent4x4 is offline  
post #7 of 27 (permalink) Old 06-05-2013, 08:05 PM
ahhhh..... crap!!!
 
txdxrider's Avatar
 
Join Date: Aug 2011
Location: North Texas
Posts: 1,817
Bronco Info: 91 Bronco XLT 5.8 E4OD 3.55
iTrader: (2)
Anyone know if the upper engine bay moulding and AC hose straps will work on a 91?

Lead follow or get OUT of the way..
91 Bronco XLT 351W 3.55 -Other toys - my co demo, 2002 Excursion 7.3l, 2008 VRSCDXA, 2016 BMW Z4 3.5 - My Build Thread
txdxrider is offline  
post #8 of 27 (permalink) Old 08-02-2013, 12:59 AM Thread Starter
Fullsize Member
 
Join Date: Jun 2010
Location: Collin county, TX
Posts: 3,718
Bronco Info: Brick Nose on 15x10s/32s with leveling coils
iTrader: (2)
Quote:
Originally Posted by GetBent4x4 View Post
http://row52.com/Vehicle/Index/U15SLEH8894
79 bronco...d44 front

july 3rd update. D44 still there, tailgate has dents on the bottom but is still solid. some bubbles.
d44 still there. Probably going to be scrapped any day now.

south central dallas picknpull had a few highland park city f150s. Propane setup with a turbo setup. Was kinda weird to see.
GetBent4x4 is offline  
post #9 of 27 (permalink) Old 09-26-2013, 12:00 PM
Registered User
 
JeffForSale's Avatar
 
Join Date: Sep 2012
Location: TX
Posts: 75
Bronco Info: '93 XLT 302
iTrader: (0)
Hey, this could be pretty handy. Thanks for the updates!

Any idea what the picknpull charges for motors or seats? I think I'll head down that way to take a look

JeffForSale is offline  
post #10 of 27 (permalink) Old 11-21-2013, 04:11 AM
Registered User
 
Zodiac1356's Avatar
 
Join Date: Oct 2013
Location: Texas
Posts: 112
iTrader: (0)
Awesome Auto Salvage in Grand Prairie has an '88 and an '86 FSB with removeable tops still intact. Both have 5.8L longblocks still intact. Transmissions & T-cases gone. 8.8" rearends & TTB Dana 44's still there.

They also have a '93 F150 4x4 ext cab with 5.8 & E40D intact. 1356back half was removed. The chain was left dangling but looked great. TTB Dana 44 & 8.8 still there
Zodiac1356 is offline  
post #11 of 27 (permalink) Old 01-28-2015, 10:11 AM
Registered User
 
dash_cam's Avatar
 
Join Date: Nov 2014
Location: dallas tx
Posts: 1,472
Bronco Info: 1996 EB, 351w, basically stock. 1981 custom 351m, long gone.
iTrader: (1)
Garage
i'll bump this.

awesome auto salvage had what might be the remains of the two broncos above, and a newer (92-96) bronco with serious front end damage.

one of the older broncos had the interior spare tire mount. it only had surface rust. a little cleaning and fresh paint is all it needs.

it's fun to do bad things

my "build" thread
dash_cam is offline  
post #12 of 27 (permalink) Old 02-03-2015, 10:34 PM
Registered User
 
Join Date: Oct 2011
Location: Dallas
Posts: 85
Bronco Info: 94 EB
iTrader: (0)
Quote:
Originally Posted by dash_cam View Post
i'll bump this.

awesome auto salvage had what might be the remains of the two broncos above, and a newer (92-96) bronco with serious front end damage.

one of the older broncos had the interior spare tire mount. it only had surface rust. a little cleaning and fresh paint is all it needs.
Are those universal? Could I take an older model and install it on my 94 for instance?
The Lox is offline  
post #13 of 27 (permalink) Old 02-04-2015, 08:46 AM
Registered User
 
dash_cam's Avatar
 
Join Date: Nov 2014
Location: dallas tx
Posts: 1,472
Bronco Info: 1996 EB, 351w, basically stock. 1981 custom 351m, long gone.
iTrader: (1)
Garage
Quote:
Originally Posted by The Lox View Post
Are those universal? Could I take an older model and install it on my 94 for instance?
i honestly don't know for sure. i bet it would. i suggest you go get it and try. i don't think it'll be very expensive. (those are educated guesses, not just talking about of my butt)

it's fun to do bad things

my "build" thread
dash_cam is offline  
post #14 of 27 (permalink) Old 02-13-2015, 08:41 PM Thread Starter
Fullsize Member
 
Join Date: Jun 2010
Location: Collin county, TX
Posts: 3,718
Bronco Info: Brick Nose on 15x10s/32s with leveling coils
iTrader: (2)
picknpull fort worth

Nice 80-86 push bumper with fog lights, looks like a nice truck, maybe a clean tailgate. maybe 15x10 wheels? 50% off this weekend for members too.
http://row52.com/Vehicle/Index/1FMDU15N8GLA38757

GetBent4x4 is offline  
post #15 of 27 (permalink) Old 02-19-2015, 03:01 AM
Registered User
 
Join Date: Jun 2011
Location: Denton tx
Posts: 91
Bronco Info: 92 bronco 302
iTrader: (0)
Tailgate had rusted holes in the bottom of it.
Svtdemon is offline  
post #16 of 27 (permalink) Old 02-19-2015, 03:02 AM
Registered User
 
Join Date: Jun 2011
Location: Denton tx
Posts: 91
Bronco Info: 92 bronco 302
iTrader: (0)
I've been search for a solid tailgate for a while now. May have to break down and by a new one.
Svtdemon is offline  
post #17 of 27 (permalink) Old 02-24-2015, 11:08 PM
Registered User
 
Join Date: Oct 2011
Location: Dallas
Posts: 85
Bronco Info: 94 EB
iTrader: (0)
Quote:
Originally Posted by GetBent4x4 View Post
picknpull fort worth

Nice 80-86 push bumper with fog lights, looks like a nice truck, maybe a clean tailgate. maybe 15x10 wheels? 50% off this weekend for members too.
http://row52.com/Vehicle/Index/1FMDU15N8GLA38757

Members?
The Lox is offline  
post #18 of 27 (permalink) Old 03-03-2015, 12:38 AM Thread Starter
Fullsize Member
 
Join Date: Jun 2010
Location: Collin county, TX
Posts: 3,718
Bronco Info: Brick Nose on 15x10s/32s with leveling coils
iTrader: (2)
toolkit rewards google it.
GetBent4x4 is offline  
post #19 of 27 (permalink) Old 03-03-2015, 09:46 AM
Registered User
 
dash_cam's Avatar
 
Join Date: Nov 2014
Location: dallas tx
Posts: 1,472
Bronco Info: 1996 EB, 351w, basically stock. 1981 custom 351m, long gone.
iTrader: (1)
Garage
Quote:
Originally Posted by GetBent4x4 View Post
toolkit rewards google it.
i've never heard of that, but next time i go to a picknpull i'll sign up. thanks for the tip!

it's fun to do bad things

my "build" thread
dash_cam is offline  
post #20 of 27 (permalink) Old 04-30-2015, 09:57 PM Thread Starter
Fullsize Member
 
Join Date: Jun 2010
Location: Collin county, TX
Posts: 3,718
Bronco Info: Brick Nose on 15x10s/32s with leveling coils
iTrader: (2)
GetBent4x4 is offline  
Reply

  Ford Bronco Forum > Wheeling > Southwest Chapter

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Bronco Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself. DO NOT USE Gmail.com accounts. If you only have a Gmail.com email please contact the administrator here

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome