Rponce53's Leaf 60 SAS - Page 2 - Ford Bronco Forum
 4Likes
Reply
 
LinkBack Thread Tools Display Modes
post #21 of 60 (permalink) Old 07-22-2010, 12:24 AM Thread Starter
Registered User
 
RPonce53's Avatar
 
Join Date: Apr 2008
Location: San Jose, CA
Posts: 71
Bronco Info: 1994 Eddie Bauer 5.8 E40D, Dana 60 front, 10.25 rear, 4.10, 37x13.5 Xterrains, Lincoln Locked
iTrader: (2)
I ended up paying like 400 for everything because I bought it piece by piece. Ballistic Fab sells it all in a kit on their website for cheaper than that.
RPonce53 is offline  
Sponsored Links
Advertisement
 
post #22 of 60 (permalink) Old 07-22-2010, 12:57 PM
Registered User
 
CoorsRacing28's Avatar
 
Join Date: May 2010
Location: Santa Cruz Mountains. CA
Posts: 151
Bronco Info: 1992 F150, 5.8, 5Speed, SAS KP D60, 10.25 Rear, 37's, 2000w stereo, 33gal bronoco tank.
iTrader: (0)
CoorsRacing28 is offline  
post #23 of 60 (permalink) Old 07-22-2010, 02:34 PM Thread Starter
Registered User
 
RPonce53's Avatar
 
Join Date: Apr 2008
Location: San Jose, CA
Posts: 71
Bronco Info: 1994 Eddie Bauer 5.8 E40D, Dana 60 front, 10.25 rear, 4.10, 37x13.5 Xterrains, Lincoln Locked
iTrader: (2)
RPonce53 is offline  
 
post #24 of 60 (permalink) Old 07-22-2010, 03:16 PM
Registered User
 
CoorsRacing28's Avatar
 
Join Date: May 2010
Location: Santa Cruz Mountains. CA
Posts: 151
Bronco Info: 1992 F150, 5.8, 5Speed, SAS KP D60, 10.25 Rear, 37's, 2000w stereo, 33gal bronoco tank.
iTrader: (0)
nice nice, so did you do this one?

or this one?


i just plan on doing pretty much what you did, which is why i am asking all of these questions haha

thanks for the help!
CoorsRacing28 is offline  
post #25 of 60 (permalink) Old 07-22-2010, 04:02 PM Thread Starter
Registered User
 
RPonce53's Avatar
 
Join Date: Apr 2008
Location: San Jose, CA
Posts: 71
Bronco Info: 1994 Eddie Bauer 5.8 E40D, Dana 60 front, 10.25 rear, 4.10, 37x13.5 Xterrains, Lincoln Locked
iTrader: (2)
I went with the second one. I only have one Hi-steer arm and it's on the passenger side knuckle.

Here's a good view.
RPonce53 is offline  
post #26 of 60 (permalink) Old 07-22-2010, 04:08 PM
Fullsize Member
 
Worldclasssniper's Avatar
 
Join Date: Mar 2009
Location: Canyon Country CA
Posts: 2,629
Bronco Info: 92XLT D60/10.25 Disks 9 in 40's 351 jba headers k&n intake warn hubs Edelbrock Performer heads
iTrader: (2)
I got mine from WFO. Its a great kit, good setup.


My Build

Built not Bought!!

WEST COAST BRONCO MAFIA
Worldclasssniper is offline  
post #27 of 60 (permalink) Old 07-22-2010, 05:16 PM
Banned
 
Join Date: Dec 2005
Location: Nor Cal
Posts: 1,311
Bronco Info: '89 351 c-6 leaf sas kp d60wzip locker 14bolt 42x15x15 rockers 5.38s
iTrader: (9)
Quote:
Originally Posted by Worldclasssniper View Post
I got mine from WFO. Its a great kit, good setup.
Me too.
Dan Theman is offline  
post #28 of 60 (permalink) Old 07-22-2010, 09:47 PM
Registered User
 
psmwrx's Avatar
 
Join Date: Nov 2007
Location: Frednecksburg, Va
Posts: 473
Bronco Info: '89,302,ZF,GT40's,D60/Locked and Disc'ed 10.25, Bilstiens
iTrader: (14)
Me 3. WFO makes some good stuff.
psmwrx is offline  
post #29 of 60 (permalink) Old 07-23-2010, 02:45 PM
Registered User
 
96broncokid's Avatar
 
Join Date: Oct 2009
Location: Sterling, Mass
Posts: 191
Bronco Info: 1996 Bronco, 351, 6inch lift, 35's '92 F250 4x4 diesel '74 F250 Highboy
iTrader: (0)
Rponce change your info and picture!

'99 F350 XLT RCLB 7.3 PSD, Auto , 33's
'96 Bronco XLT, 351, E40D, 6 Inch Lift, 35's SOLD http://www.fullsizebronco.com/forum/...d.php?t=179072
'92 F250 XL 4x4 7.3 idi, zf5, 37s
'74 F250 Highboy 390, np435, 2" lift 38.5's
96broncokid is offline  
post #30 of 60 (permalink) Old 07-23-2010, 08:18 PM
negative creep
 
Andy351's Avatar
 
Join Date: Mar 2003
Location: the place where all the junkies go
Posts: 7,017
Bronco Info: bronco with seats and a steering wheel
iTrader: (1)
WFO beats ballistic anyday of the week.

Andy351 is offline  
post #31 of 60 (permalink) Old 07-23-2010, 08:55 PM Thread Starter
Registered User
 
RPonce53's Avatar
 
Join Date: Apr 2008
Location: San Jose, CA
Posts: 71
Bronco Info: 1994 Eddie Bauer 5.8 E40D, Dana 60 front, 10.25 rear, 4.10, 37x13.5 Xterrains, Lincoln Locked
iTrader: (2)
I agree with that. WFO will be getting all of my future business. I talked to Trevor on the phone for about an hour. Super cool dude. I also drove up to the shop to get a part and he was super cool. Like I said, he will be getting all my business.
RPonce53 is offline  
post #32 of 60 (permalink) Old 02-10-2011, 11:57 AM Thread Starter
Registered User
 
RPonce53's Avatar
 
Join Date: Apr 2008
Location: San Jose, CA
Posts: 71
Bronco Info: 1994 Eddie Bauer 5.8 E40D, Dana 60 front, 10.25 rear, 4.10, 37x13.5 Xterrains, Lincoln Locked
iTrader: (2)
A little update on this. I took it on the rubicon in august without fixing the driveshaft... That was a mistake it fell out about 8 times on the trail, mostly in some very inconvenient spots. Also the welded rear end has been causing me a bit of trouble. Pics soon...
RPonce53 is offline  
post #33 of 60 (permalink) Old 02-10-2011, 09:08 PM
Banned
 
Join Date: Dec 2005
Location: Nor Cal
Posts: 1,311
Bronco Info: '89 351 c-6 leaf sas kp d60wzip locker 14bolt 42x15x15 rockers 5.38s
iTrader: (9)
Dan Theman is offline  
post #34 of 60 (permalink) Old 02-10-2011, 09:42 PM
Registered User
 
chris_capps's Avatar
 
Join Date: Jul 2007
Location: Beaufort, South Carolina
Posts: 450
Bronco Info: 1988 Ford Bronco
iTrader: (0)
I may have missed it, were those stock springs?

chris_capps is online now  
post #35 of 60 (permalink) Old 02-11-2011, 12:00 AM
Thanks 351w500
 
LarryP's Avatar
 
Join Date: Mar 2005
Location: Northcentral,CA.Twain Harte, up here in the mountains
Posts: 5,448
Bronco Info: 88 Centerion 460 Dana 60/10.25 78 Bronk Cromo shafts,Detoit 4.56's lift 7" Deavers 38's 9"rear disk
iTrader: (52)
One of just many...Ryan putting the front DS back in and together at the Rubicon

Click image for larger version

Name:	DSC_0845-1.JPG
Views:	276
Size:	61.1 KB
ID:	16039


I take Prayer Requests. God Bless
LarryP is offline  
post #36 of 60 (permalink) Old 02-11-2011, 12:50 AM Thread Starter
Registered User
 
RPonce53's Avatar
 
Join Date: Apr 2008
Location: San Jose, CA
Posts: 71
Bronco Info: 1994 Eddie Bauer 5.8 E40D, Dana 60 front, 10.25 rear, 4.10, 37x13.5 Xterrains, Lincoln Locked
iTrader: (2)
Hahaha where did you get that?! From Joe?
RPonce53 is offline  
post #37 of 60 (permalink) Old 02-11-2011, 01:12 AM
Registered User
 
Andrewu6's Avatar
 
Join Date: Jan 2010
Location: Poulsbo, Washingtom
Posts: 325
Bronco Info: 84 d60/10.25 on 37's w/ a Cummins
iTrader: (0)
Looks great man, hopefully my setup will have similar flex when finished
Andrewu6 is offline  
post #38 of 60 (permalink) Old 02-11-2011, 02:31 AM
Fullsize Member
 
Toy Keeper's Avatar
 
Join Date: Jul 2006
Location: Palmdale CA
Posts: 1,099
Bronco Info: 91 ex US Border Patrol K-9 unit
iTrader: (2)
Quote:
Originally Posted by LarryP View Post
One of just many...Ryan putting the front DS back in and together at the Rubicon

Attachment 16039
Looks like the time on Cadilac hill


FOTM July 2012 Dana 60 SAS, sterling rear. F&R ARBs, 4.88s, G3 alt, T-Bird fan, OBA, 7.5" lift, Hummer double bead locks with 36" military tires, Remote res sag pump with Hydro boost brakes.
Toy Keeper is offline  
post #39 of 60 (permalink) Old 12-09-2016, 06:05 AM
Registered User
 
Join Date: Nov 2016
Location: Northern CA
Posts: 10
Bronco Info: '94 EB FSB, Leaf sprung KP 60 front, Sterling 10.25 rear, 5.8, AOD, and BW 1356 (for now)
iTrader: (0)
I ended up with RPonce's '94 Bronco and I am picking up where he left off. I had a long travel front shaft built, ditched the welded rear and put in a detroit, and just got some new 40x13.50 TSL SX II's mounted on. It is coming along a little at a time! Pics to follow, and I will try to start a build thread as soon as I have enough posts.

JGR, Dman94X and CDA 455 like this.
josh03707 is offline  
post #40 of 60 (permalink) Old 12-09-2016, 06:18 AM
Registered User
 
Join Date: Nov 2016
Location: Northern CA
Posts: 10
Bronco Info: '94 EB FSB, Leaf sprung KP 60 front, Sterling 10.25 rear, 5.8, AOD, and BW 1356 (for now)
iTrader: (0)
looks like I got one current pic to load. Total poser shot while we were trimming fenders in the shop. Next on the list is gearing, trying to decide between a NWF black box, 203/205 doubler, or an Atlas... the Atlas is a long shot due to $$ constraints. It anyone has any advice feel free to share it!
josh03707 is offline  
Reply

  Ford Bronco Forum > Bronco Discussions > Solid Axle Swaps

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Bronco Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself. DO NOT USE Gmail.com accounts. If you only have a Gmail.com email please contact the administrator here

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome