BroncoAir Winch bumper for your 87-91 - Ford Bronco Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 60 (permalink) Old 03-09-2009, 03:42 PM Thread Starter
FSM Lifetime
 
BoulderBronco's Avatar
 
Join Date: Feb 2003
Location: Boulder, CO
Posts: 3,686
Bronco Info: 93 5.8L tons of stuff
BroncoAir Winch bumper for your 87-91

We have decided to hold off on the sliders for now. But some good news for you older Bronco owners looking for a solid winch bumper. We are going forward with a front bumper for the 87-91 model trucks. So start saving for it. We hope to have the prototype done in 3-4 weeks. Shortly after that, if all the testing goes well, we should have it available for purchase. It will be almolst exactly the same style as our current front bumper. The only difference will be any minor changes to make it fit the different body and frame and contour to the front clip and match the wheel wells. Also, while price is not 100% set, I am expecting the price to be the same as the current front bumper. Contact me with any questions or for ordering info.

BoulderBronco is offline  
Sponsored Links
Advertisement
 
post #2 of 60 (permalink) Old 03-09-2009, 05:07 PM
Back in Action
 
96GreenMonster's Avatar
 
Join Date: Jun 2006
Location: South Windsor CT
Posts: 6,568
Bronco Info: Puke Green Lot's of lift and 38s with Dana 60 SAS and 10.25 Rear
Nice to see you aren't discriminating! Keep up the good work. One day I will own your bumpers!

CHECK OUT MY RIDES



Quote:
Originally Posted by amtarsha View Post
You're annoying me. Shut your manpleaser.
96GreenMonster is offline  
post #3 of 60 (permalink) Old 03-10-2009, 02:09 AM
FSM Lifetime
 
PaleRider's Avatar
 
Join Date: Jul 2005
Location: Yucaipa, CA
Posts: 155
Bronco Info: 1994 Bronco 5.8 w/8inch Skyjacker lift kit & 37" Procomp's & BroncoAir bumpers!
CHRIS......DUDE WTF?...hold off the sliders? Do BOTH sliders and 87-91 bumpers. :)

Mike
PaleRider is offline  
post #4 of 60 (permalink) Old 03-10-2009, 02:57 AM
Back in Action
 
96GreenMonster's Avatar
 
Join Date: Jun 2006
Location: South Windsor CT
Posts: 6,568
Bronco Info: Puke Green Lot's of lift and 38s with Dana 60 SAS and 10.25 Rear
Quote:
Originally Posted by PaleRider View Post
CHRIS......DUDE WTF?...hold off the sliders? Do BOTH sliders and 87-91 bumpers. :)

Mike
his products take a while to develope due to making them look perfect

CHECK OUT MY RIDES



Quote:
Originally Posted by amtarsha View Post
You're annoying me. Shut your manpleaser.
96GreenMonster is offline  
post #5 of 60 (permalink) Old 03-10-2009, 11:27 PM
Registered User
 
Critter_Bronco's Avatar
 
Join Date: Jan 2009
Location: Georgia
Posts: 84
Bronco Info: 1987 non fuel infested 5.8 h.o. c-6 trany bog t case sitting on 38.5's
rock on chris glad to hear your bringing out the bumpers, keep us posted on when they will be ready to go !!!!
Critter_Bronco is offline  
post #6 of 60 (permalink) Old 03-11-2009, 12:26 AM
Mentally in Cancun.
 
stan the man's Avatar
 
Join Date: Nov 2006
Location: San Jose, CA.
Posts: 6,427
Bronco Info: 1996 Ford Blazer. Lifted, locked, and loaded. Where's the Zombies?
Chris, are you going to have any awful-economy sales? If not, I suggest you think about it come tax refund time




California Bay Area off road UC4x4.com
stan the man is offline  
post #7 of 60 (permalink) Old 03-11-2009, 03:32 AM
Registered User
 
Bonzai's Avatar
 
Join Date: Sep 2005
Location: Tracy, CA
Posts: 3,514
Bronco Info: '89 Bronco XLT 5.8L
Quote:
Originally Posted by stan the man View Post
Chris, are you going to have any awful-economy sales? If not, I suggest you think about it come tax refund time
i know...its been easy not having to stress over getting one of these bumpers but now that theyre coming to the 87-91's im gonna want one! A pretty price would make that an easy decision
Bonzai is offline  
post #8 of 60 (permalink) Old 03-11-2009, 12:12 PM
F.O.T.Y. 2003
 
Crazed's Avatar
 
Join Date: Feb 2003
Location: Washougal Wa.
Posts: 9,112
Bronco Info: '89 XLT SAS ~'78 Ranger, '90 Eddie
looking forward to seeing one of these
Crazed is offline  
post #9 of 60 (permalink) Old 03-12-2009, 12:36 AM
It's BTW Not AKA!
 
GTRider245's Avatar
 
Join Date: Sep 2005
Location: Georgia
Posts: 5,357
Bronco Info: 92 F-150 4x4, 302, BBK Shorties, Flowmaster Duals, M5OD, 2" Rancho Coils, 33x12.50 M/Ts
I know this has been long awaited. Should be awesome, like everything else Chris does.

1992 F-150 4x4
East Coast Firefighting- Only the Best
http://www.supermotors.org/vehicles/...il.php?id=4768

Quote:
Originally Posted by dogonmut View Post
NTB stole my baby's momma away from me when she was on her way down to the check cashin' store to pay my beeper bill.
Quote:
Originally Posted by stan the man View Post
I spent $330 for 4 BJs.
GTRider245 is offline  
post #10 of 60 (permalink) Old 03-12-2009, 08:46 PM Thread Starter
FSM Lifetime
 
BoulderBronco's Avatar
 
Join Date: Feb 2003
Location: Boulder, CO
Posts: 3,686
Bronco Info: 93 5.8L tons of stuff
Quote:
Originally Posted by PaleRider View Post
CHRIS......DUDE WTF?...hold off the sliders? Do BOTH sliders and 87-91 bumpers. :)
Mike
One thing at a time. The sliders have become an issue. It's simply not possible to build a good set and keep the price below $500. The main issue is strength. We could have built a set for that price range but they would not be up to our standards. Here is a crude drawing of what I am looking to do. The issue of strength on the outer portion of sheet metal while keeping cost down is the problem. The side view drawing has the steps option drawn in. Without the steps it would be a straight line from wheel to wheel. We are going to do this bumper and then revisit the sliders.



Quote:
Originally Posted by stan the man View Post
Chris, are you going to have any awful-economy sales? If not, I suggest you think about it come tax refund time
Most likely not. If we do anything it will be to offer our new bumpers in a group buy opportunity. That will include the new front bumpers (for 87-91 trucks) only. Never say never but I don't plan on having any sales. Our prices are already as low as we can get them while still staying in business.
Attached Images
File Type: jpg sliders drawing.jpg (22.0 KB, 513 views)

BoulderBronco is offline  
post #11 of 60 (permalink) Old 03-14-2009, 02:43 AM
FSM Lifetime
 
muffinman944's Avatar
 
Join Date: Jun 2006
Location: Clarksville, TN
Posts: 1,377
Bronco Info: 1990 Bronco Custom, 1995 Bronco XLT (Fummins)
Awesome, I'm looking forward to picking one up!

Quote:
Originally Posted by Joes93Bronco View Post
...I have NEVER had any probs with my 4 incher ...
'90 Bronco...parting out

'95 FSB: D60/AAM 11.5'', BTS E4OD/Atlas II, 6.7 Cummins conversion in progress
muffinman944 is offline  
post #12 of 60 (permalink) Old 03-14-2009, 05:20 PM
It's BTW Not AKA!
 
GTRider245's Avatar
 
Join Date: Sep 2005
Location: Georgia
Posts: 5,357
Bronco Info: 92 F-150 4x4, 302, BBK Shorties, Flowmaster Duals, M5OD, 2" Rancho Coils, 33x12.50 M/Ts
Maybe I am having an off day, but I cant tell wtf that picture is.

1992 F-150 4x4
East Coast Firefighting- Only the Best
http://www.supermotors.org/vehicles/...il.php?id=4768

Quote:
Originally Posted by dogonmut View Post
NTB stole my baby's momma away from me when she was on her way down to the check cashin' store to pay my beeper bill.
Quote:
Originally Posted by stan the man View Post
I spent $330 for 4 BJs.
GTRider245 is offline  
post #13 of 60 (permalink) Old 03-15-2009, 03:04 AM
Yeeeeehaw Y'all!
 
Ironclad's Avatar
 
Join Date: Sep 2003
Location: Suffolk, Virginia
Posts: 2,038
Bronco Info: 1988 XLT
Out frigginstanding!

Thanks.....

I can't wait to see the finished product!


Portsmouth, Virginia
1988 XLT- 302 HO - Dual Exhaust - 6-inch Suspension lift - Sitting on 35's

....onward through the fog.
Ironclad is offline  
post #14 of 60 (permalink) Old 03-15-2009, 08:16 PM Thread Starter
FSM Lifetime
 
BoulderBronco's Avatar
 
Join Date: Feb 2003
Location: Boulder, CO
Posts: 3,686
Bronco Info: 93 5.8L tons of stuff
Quote:
Originally Posted by GTRider245 View Post
Maybe I am having an off day, but I cant tell wtf that picture is.
It's a quick and poor atempt at showing the basic design of the sliders that we were thinking of doing. The top shows a side view and the bottom shows a view from the back. The idea is to have a channel type slider with real good protection, new and different style and better ground clearance than most designs.

BoulderBronco is offline  
post #15 of 60 (permalink) Old 03-16-2009, 09:58 PM
Yeeeeehaw Y'all!
 
Ironclad's Avatar
 
Join Date: Sep 2003
Location: Suffolk, Virginia
Posts: 2,038
Bronco Info: 1988 XLT
Quote:
Originally Posted by BoulderBronco View Post
It's a quick and poor atempt at showing the basic design of the sliders that we were thinking of doing. The top shows a side view and the bottom shows a view from the back. The idea is to have a channel type slider with real good protection, new and different style and better ground clearance than most designs.
Look now.... not trying to be an @$$ but this thread is supposed to be about the loooooooooooooooooooooooooooooong awaited Bronco Air winch bumper for the oh so unappreciated flat nosed Broncos so stick to the topic at hand please and pube-lish some drawins or pictures of that rascal!

Man oh man... I've been tapping you on the shoulder asking for this for how many years now? I just hope when the product is final and the offer comes that we really can get enough committed folks together to get that special discount.


Portsmouth, Virginia
1988 XLT- 302 HO - Dual Exhaust - 6-inch Suspension lift - Sitting on 35's

....onward through the fog.
Ironclad is offline  
post #16 of 60 (permalink) Old 03-17-2009, 12:33 AM
FSM Lifetime
 
muffinman944's Avatar
 
Join Date: Jun 2006
Location: Clarksville, TN
Posts: 1,377
Bronco Info: 1990 Bronco Custom, 1995 Bronco XLT (Fummins)
Quote:
Originally Posted by Ironclad View Post
Look now.... not trying to be an @$$ but this thread is supposed to be about the loooooooooooooooooooooooooooooong awaited Bronco Air winch bumper for the oh so unappreciated flat nosed Broncos so stick to the topic at hand please and pube-lish some drawins or pictures of that rascal!

Man oh man... I've been tapping you on the shoulder asking for this for how many years now? I just hope when the product is final and the offer comes that we really can get enough committed folks together to get that special discount.
Well, someone asked about them so he responded, whats the big deal?

Quote:
Originally Posted by Joes93Bronco View Post
...I have NEVER had any probs with my 4 incher ...
'90 Bronco...parting out

'95 FSB: D60/AAM 11.5'', BTS E4OD/Atlas II, 6.7 Cummins conversion in progress
muffinman944 is offline  
post #17 of 60 (permalink) Old 03-17-2009, 04:49 PM
Yeeeeehaw Y'all!
 
Ironclad's Avatar
 
Join Date: Sep 2003
Location: Suffolk, Virginia
Posts: 2,038
Bronco Info: 1988 XLT
Quote:
Originally Posted by muffinman944 View Post
Well, someone asked about them so he responded, whats the big deal?
Sheesh......its a joke man.... lighten up.


Portsmouth, Virginia
1988 XLT- 302 HO - Dual Exhaust - 6-inch Suspension lift - Sitting on 35's

....onward through the fog.
Ironclad is offline  
post #18 of 60 (permalink) Old 03-24-2009, 05:49 AM
Registered User
 
Jerkal83's Avatar
 
Join Date: Mar 2009
Location: East Wenatchee, WA
Posts: 43
Bronco Info: 89 FSB, 351w
NO SOUP FOR YOU!
Jerkal83 is offline  
post #19 of 60 (permalink) Old 03-28-2009, 04:40 AM
Registered User
 
Join Date: Aug 2008
Location: Simi Valley, CA
Posts: 61
Bronco Info: 1989 Ford Bronco 5.8L 351W
how much we lookin at for the bumpers? where can i see a picture?
chrisilva88@hotmail. is offline  
post #20 of 60 (permalink) Old 03-28-2009, 02:27 PM
Back in Action
 
96GreenMonster's Avatar
 
Join Date: Jun 2006
Location: South Windsor CT
Posts: 6,568
Bronco Info: Puke Green Lot's of lift and 38s with Dana 60 SAS and 10.25 Rear
Quote:
Originally Posted by chrisilva88@hotmail. View Post
how much we lookin at for the bumpers? where can i see a picture?
Do you know how to read????

If so re-read the thread.


1.Around the same price as the 92-96 broncos (850-1500 depending on what mods you want)
2. It is in the process so he doesn't have pictures. go on broncoair.com to see pictures of the 92-96

CHECK OUT MY RIDES



Quote:
Originally Posted by amtarsha View Post
You're annoying me. Shut your manpleaser.
96GreenMonster is offline  
Reply

  Ford Bronco Forum > For Sale/Where to Buy > FSB Member Vendors

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Bronco Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself. DO NOT USE Gmail.com accounts. If you only have a Gmail.com email please contact the administrator here

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome