Cummins conversion started! - FSB Forums
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 352 (permalink) Old 09-15-2009, 11:39 AM Thread Starter
gos
Registered User
 
Join Date: Mar 2009
Location: Orcas Island Washington
Posts: 540
Bronco Info: 1996 Bronco XLT, Cummins 6Bt Powered, E4od trans, Eaton Trutrac, Lifted with 32's on Ultras
Cummins conversion started!

We started the Cummins swap on my 96 Bronco yesterday, and as promised, I will try to post daily reports and pictures on our progress. We are hoping to have the swap completed within 2 weeks.

First off a few stats, we started with a clean 1996 Bronco with 89,000 miles. It had a 5.8 and auto trans, tow package and stock suspension. The first thing done was to add a 4” lift and 16” wheels and tires. The motor we are installing is a 1997 12 valve Cummins out of a wreck with 92,000 miles. The transmission is an E4OD from a 1996 F350 that was running a Powerstroke diesel. We rebuilt the trans using all Sun Coast parts and are using a 3 clutch billet converter. The injection pump has a few mods and we will run bigger injectors and a bigger then stock turbo. For now, the stock axles will stay with the exception of adding limited slip to the rear.

First thing we did was pull the front end from grill to fan.










Next the stock motor mounts were removed and new mounts were installed.











That pretty much took a full day. We did have some time left to start tearing down the Cummins to get it ready for a complete reseal.

I will try to post again tomorrow. JS.
gos is offline  
Sponsored Links
Advertisement
 
post #2 of 352 (permalink) Old 09-15-2009, 11:53 AM
Never Done
 
kemicalburns's Avatar
 
Join Date: Mar 2003
Location: OC,Oregon
Posts: 6,815
what are your plans for how the tranny will get its info to shift properly?

For Sale - 94 XLT 357/E4OD Trans-go stage II
6" Stage II ProComp,35" BFG/AT 4.88 f (aussie) / r (open) / Custom Sliders, Custom bumper Warn HS9500, Edelbrock truck upper/lower,JBA headers,Custom Y pipe hi flow cat & Full 3"
kemicalburns is offline  
post #3 of 352 (permalink) Old 09-15-2009, 02:10 PM Thread Starter
gos
Registered User
 
Join Date: Mar 2009
Location: Orcas Island Washington
Posts: 540
Bronco Info: 1996 Bronco XLT, Cummins 6Bt Powered, E4od trans, Eaton Trutrac, Lifted with 32's on Ultras
We are using a stand alone controller from Powertrain Control Solutions. JS.
gos is offline  
post #4 of 352 (permalink) Old 09-15-2009, 02:14 PM
Registered User
 
Join Date: Jan 2009
Location: victorville, ca
Posts: 48
Bronco Info: stock 1990, 302,about half way done with interior update
i hope it all goes smooth in the swap because when i save enough dough i will start gathering parts to do the same swap. i think you are going to have one of the ultimate broncos, looks, brute strength & all the bragging rights you could ever want, plus lets not forget the reliability...ONCE AGAIN GOOD LUCK
beanzz is offline  
post #5 of 352 (permalink) Old 09-15-2009, 02:28 PM
Registered User
 
ericautopart's Avatar
 
Join Date: Oct 2007
Location: Jersey Shore, NJ
Posts: 1,501
I was just telling someone last week if I won the lotto I'd get a clean Eddie Bronco and do a cummins swap. Looks like your livin the dream.

Formally of Automotive Parts. Now I'm just here.
ericautopart is offline  
post #6 of 352 (permalink) Old 09-15-2009, 02:57 PM
Never Done
 
kemicalburns's Avatar
 
Join Date: Mar 2003
Location: OC,Oregon
Posts: 6,815
you might consider dropping a sterling rear diff out back and just doing an 8 lug conversion up front. i dont see that 8.8 surviving at all and would suck to be stranded and have to pay towing bills.

For Sale - 94 XLT 357/E4OD Trans-go stage II
6" Stage II ProComp,35" BFG/AT 4.88 f (aussie) / r (open) / Custom Sliders, Custom bumper Warn HS9500, Edelbrock truck upper/lower,JBA headers,Custom Y pipe hi flow cat & Full 3"
kemicalburns is offline  
post #7 of 352 (permalink) Old 09-15-2009, 03:35 PM
Registered User
 
Indecl's Avatar
 
Join Date: Jul 2009
Location: Virginia, USA
Posts: 248
Bronco Info: 92' XLT 302 w/ 6'' SuperLift + BFG A/T 35x12.50's. Maroon/Grey
Quote:
Originally Posted by ericautopart View Post
I was just telling someone last week if I won the lotto I'd get a clean Eddie Bronco and do a cummins swap. Looks like your livin the dream.
If I won the lottery, i'd do a 7.3 swap. I wasn't too keen on the idea of having a Diesel BKO but it's starting to seep in on me. Without the lottery though, i'd do a Cummings swap.

It's just like with the Mud buggy a friend and I are going to be starting, even though Chevy parts are cheaper and much easier to find... i'm a Ford man and would love to keep everything Ford if possible.

Good luck gos, look forward to keeping an eye on this thread.


We Bleed FORD BLUE
"She's like cocaine, heroin, alcohol, and vicodin. She's my addiction."
Indecl is offline  
post #8 of 352 (permalink) Old 09-15-2009, 03:52 PM
Registered User
 
Join Date: May 2009
Location: North Dallas/South Austin
Posts: 327
Bronco Info: 95 Eddie Bauer-4bt-Zf5
who the hell would want a cummins bronco?
strange is offline  
post #9 of 352 (permalink) Old 09-15-2009, 04:02 PM
Registered User
 
Join Date: Feb 2008
Location: Maple Ridge BC Canada
Posts: 209
Bronco Info: 1990 Bronco custom 5.0 AOD
Quote:
Originally Posted by strange View Post
who the hell would want a cummins bronco?
well hmmmm idk, your name comes to mind lol
lazy_one_1 is offline  
post #10 of 352 (permalink) Old 09-15-2009, 04:03 PM
Registered User
 
sr71mopar's Avatar
 
Join Date: Mar 2008
Location: Santa Rosa
Posts: 815
Bronco Info: Replaced by an F100
Quote:
Originally Posted by strange View Post
who the hell would want a cummins bronco?
me
sr71mopar is offline  
post #11 of 352 (permalink) Old 09-15-2009, 04:05 PM
Registered User
 
Mrit's Avatar
 
Join Date: Aug 2003
Location: Snohomish, Wa
Posts: 1,080
Bronco Info: 1986 Eddie Bauer
Quote:
Originally Posted by strange View Post
who the hell would want a cummins bronco?
I would love one in the bronco, and I plan on installing one in the Super if the Powerstroker ever gives up(knock on wood)

'86 Eddie Bauer, '99 F350 Lariat, '75 Corvette Stingray.
It's got safety tubes, but I ain't scared, Brakes are good, tires fair... "Hot rod Bronco"
My truck http://www.supermotors.net/registry/3868
Mrit is offline  
post #12 of 352 (permalink) Old 09-15-2009, 07:56 PM
FSM Lifetime
 
muffinman944's Avatar
 
Join Date: Jun 2006
Location: Clarksville, TN
Posts: 1,377
Bronco Info: 1990 Bronco Custom, 1995 Bronco XLT (Fummins)
Id advise doing a D60 swap, or at least upgrading to stiffer springs.

Quote:
Originally Posted by Joes93Bronco View Post
...I have NEVER had any probs with my 4 incher ...
'90 Bronco...parting out

'95 FSB: D60/AAM 11.5'', BTS E4OD/Atlas II, 6.7 Cummins conversion in progress
muffinman944 is offline  
post #13 of 352 (permalink) Old 09-15-2009, 09:56 PM
FSM Lifetime
 
Join Date: May 2006
Location: Sonoma County CA
Posts: 4,299
Bronco Info: 1995 5.8 &1993 5.8 both sold, all the way back with a 94
Quote:
Originally Posted by strange View Post
who the hell would want a cummins bronco?
That is the ultimate, me 2.
BurlyQ is offline  
post #14 of 352 (permalink) Old 09-16-2009, 12:40 PM Thread Starter
gos
Registered User
 
Join Date: Mar 2009
Location: Orcas Island Washington
Posts: 540
Bronco Info: 1996 Bronco XLT, Cummins 6Bt Powered, E4od trans, Eaton Trutrac, Lifted with 32's on Ultras
Day two

Day two is done and so are the easy parts. Yesterday we resealed the motor and completed the basic assemble needed before we installed the motor.







Here are a couple pictures of our AC and alternator brackets. We are using the Ford AC and alt.









One concern was with the very back valve cover. Once the motor is in, it is impossible to remove the valve cover for valve adjustment. The solution was to cut off the top and dowel pin it for easier replacement. Now all you do is pop off the top and you have access to adjust the valves!.





With that completed, we sat the motor in place.








So much for the easy part! Now it's wiring, fuel system, turbo, and a whole bunch more work!

Thanks for all your great comments! JS.
gos is offline  
post #15 of 352 (permalink) Old 09-16-2009, 12:50 PM
Registered User
 
Join Date: Feb 2007
Location: weston, wv
Posts: 240
awesome post ...

best light duty motor ever ...

in the best SUV ...

97-98 got the big P7100 too ...

'85 xlt, 4x4 3/8" tube bumpers, C6,208, 60's SAS leaves, 5.13's, rear spool&discs/front detroit,saginaw (toy for the wife and kids ... i'm just their mechanic )
'01 cummins 505/1032 rwhp/tq (daily driver)
'06 cummins (wife's ride),95 tracker
wv85bronco is offline  
post #16 of 352 (permalink) Old 09-16-2009, 05:40 PM
Never Done
 
kemicalburns's Avatar
 
Join Date: Mar 2003
Location: OC,Oregon
Posts: 6,815
any before/after measurments on how the front suspension has taken to the added weight of the motor??

For Sale - 94 XLT 357/E4OD Trans-go stage II
6" Stage II ProComp,35" BFG/AT 4.88 f (aussie) / r (open) / Custom Sliders, Custom bumper Warn HS9500, Edelbrock truck upper/lower,JBA headers,Custom Y pipe hi flow cat & Full 3"
kemicalburns is offline  
post #17 of 352 (permalink) Old 09-16-2009, 05:51 PM
Registered User
 
che22879's Avatar
 
Join Date: Apr 2007
Location: Los Angeles Ca
Posts: 557
Bronco Info: 96 xlt, 5.8 , flowmaster cat back kit, frpp 9mm wires, Heatbuster 4 row radiator, 3G upgrade.
cool swap!
che22879 is offline  
post #18 of 352 (permalink) Old 09-16-2009, 06:58 PM
Registered User
 
Join Date: Mar 2008
Location: new york
Posts: 34
Bronco Info: 95 eddie bauer 5.8 auto
Sweet conversion cant wait to hear it.Good luck seems to be going smooth so far.
91 bronc is offline  
post #19 of 352 (permalink) Old 09-16-2009, 08:30 PM
Banned
 
Join Date: Jul 2009
Location: Monroe NY
Posts: 223
Bronco Info: 93 EB 5.8, 3.55's, auto hubs, 31x10.5x15 Bridgestone Dueler AT, E4OD, K&N, and 156k
this looks pretty sweet. now im not trying to steal a thread or anything but how come noone does a Duramax swap?
LOMBARDI x is offline  
post #20 of 352 (permalink) Old 09-16-2009, 09:29 PM
Registered User
 
Join Date: Sep 2009
Location: Boynton Beach, FL
Posts: 26
Bronco Info: Looking for one!
very awesome thread! I look foward to see the completion!

RIck
Ponyman460 is offline  
Reply

  FSB Forums > Bronco Discussions > 1980-'96 Bronco Tech

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the FSB Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself. DO NOT USE Gmail.com accounts. If you only have a Gmail.com email please contact the administrator here

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome