95 Bronco build list, summer project - Page 2 - Ford Bronco Forum
 34Likes
Reply
 
LinkBack Thread Tools Display Modes
post #21 of 28 (permalink) Old 03-20-2017, 09:47 AM
Registered User
 
BigBlue 94's Avatar
 
Join Date: May 2006
Location: Hoyt, Kansas
Posts: 3,118
Bronco Info: 85 Bronco, 306ci I6 w/4bbl, np435, 4" lift, 37" Irok NDs, 4.56 w/ Detroit Locker and tru trac
iTrader: (0)
Garage
I've told you numerous times that that camshaft won't work. The lsa of 107 is too small for your stock ecu. It must be 114 or above or you will never get it to run.

I bolted the same heads, along with an Eddy intake, a comp xe cam, etc to my stock bottom end on my 94. Granted it had been machined for a rebuild, but the only part I replaced was the pistons, and I never had a problem with the bottom end.
wyatt earp likes this.

94 Bronco XLT. Beefy 351, 6" , 37's, 4.88: burnt
85 Bronco custom, 4" 37's, locked 4.56, 300 i6 4 bbl, np435/208
96 f350 XL, rclb, 351, c6, BW4407 xfer
78 f150 Ranger, 351m, t18, np205, rusty
90 f150, 95 f250, 96 f350 psd: stolen, sold, and burnt, respectively.
BigBlue 94 is offline  
Sponsored Links
Advertisement
 
post #22 of 28 (permalink) Old 03-20-2017, 09:55 AM
Registered User
 
dash_cam's Avatar
 
Join Date: Nov 2014
Location: dallas tx
Posts: 1,475
Bronco Info: 1996 EB, 351w, basically stock. 1981 custom 351m, long gone.
iTrader: (1)
Garage
Quote:
Originally Posted by wyatt earp View Post
get help funding your project! Who asks for help funding anyway, loser?
what is this about?

it's fun to do bad things

my "build" thread
dash_cam is offline  
post #23 of 28 (permalink) Old 03-20-2017, 10:20 AM
Registered User
 
Join Date: Apr 2016
Location: Oregon
Posts: 297
Bronco Info: 1995 XLT 5.8 .040 Roller Cam X heads JBA headers 4" Skyjacker 33s 4:11s L/S rear Tru Trac front E4OD
iTrader: (0)
Quote:
Originally Posted by dash_cam View Post
what is this about?
Read his opening post. The last sentence, he thinks this is go fund me. I could see helping someone out, for a worthy cause, but this guy....
wyatt earp is offline  
 
post #24 of 28 (permalink) Old 03-20-2017, 10:28 AM
Registered User
 
BigBlue 94's Avatar
 
Join Date: May 2006
Location: Hoyt, Kansas
Posts: 3,118
Bronco Info: 85 Bronco, 306ci I6 w/4bbl, np435, 4" lift, 37" Irok NDs, 4.56 w/ Detroit Locker and tru trac
iTrader: (0)
Garage
Cool it guys, this is a family site. No need to cuss and get mouthy. Plus I don't think people with less than 50 posts should be talking like they own the place. I understand the frustration this poster has caused with multiple posts about very similar questions, but you don't have to read them or reply.

He posted a "funny" quip about people funding his build, something many people have joked about before. I didn't take it as a serious request.

RLV: this isn't considered a build thread, because you haven't gotten the parts and aren't building anything at the current moment. Take the time to think about what you have read and apply it to your application. There are tons of people here willing to help, but you have to take heed to their advice or no one will want to help you and you'll get cussed and yelled at.

94 Bronco XLT. Beefy 351, 6" , 37's, 4.88: burnt
85 Bronco custom, 4" 37's, locked 4.56, 300 i6 4 bbl, np435/208
96 f350 XL, rclb, 351, c6, BW4407 xfer
78 f150 Ranger, 351m, t18, np205, rusty
90 f150, 95 f250, 96 f350 psd: stolen, sold, and burnt, respectively.
BigBlue 94 is offline  
post #25 of 28 (permalink) Old 03-20-2017, 10:32 AM
Registered User
 
dash_cam's Avatar
 
Join Date: Nov 2014
Location: dallas tx
Posts: 1,475
Bronco Info: 1996 EB, 351w, basically stock. 1981 custom 351m, long gone.
iTrader: (1)
Garage
Quote:
Originally Posted by wyatt earp View Post
Read his opening post. The last sentence, he thinks this is go fund me. I could see helping someone out, for a worthy cause, but this guy....
ah...yea my eyes tend to glaze over trying to make sense of his posts. i guess i gave up half way through it.
Matco likes this.

it's fun to do bad things

my "build" thread
dash_cam is offline  
post #26 of 28 (permalink) Old 03-20-2017, 10:34 AM
Registered User
 
Matco's Avatar
 
Join Date: Feb 2014
Location: So Cal
Posts: 631
Bronco Info: 96 5.8 4x4 2 inch lift springs up front, 33 inch Toyo Open Country MT
iTrader: (0)
Reading this on a Monday morning make it go by so much better, I needed a laugh!


White 1996 Bronco 5.8 4X4 2inch lift springs up front, sitting on 33x12.5x15 Toyo Open Country M/T's with 15x10 Method Double Standards
120 inches of LED light bar good for 100,000 lumens!!
Matco is offline  
post #27 of 28 (permalink) Old 03-20-2017, 10:38 AM
gone fish'n
 
jopes's Avatar
 
Join Date: Feb 2003
Location: Maggie's Nipples, Wyoming
Posts: 23,654
Bronco Info: pile of parts
iTrader: (4)
Quote:
Originally Posted by Mikey350 View Post
Finally!! there were a dozen threads all the same - make it STOP!

Thanks @jopes
He has had numerous PM's. He don't get it how this stuff works. It isn't facebook.
Stevo440 likes this.

'01 F250, 444ci of straight piped oil burning fun. 4x4, 6 spd, GTP38R noise maker, Stage 2 injektorz. Lotsa fun!


Let's Go Fishing.
jopes is offline  
post #28 of 28 (permalink) Old 03-20-2017, 11:09 AM
Registered User
 
Join Date: Apr 2016
Location: Oregon
Posts: 297
Bronco Info: 1995 XLT 5.8 .040 Roller Cam X heads JBA headers 4" Skyjacker 33s 4:11s L/S rear Tru Trac front E4OD
iTrader: (0)
Out of respect for the Moderators, who without them, there is no forum, this is my last post on this thread. The moderators have patience and demeanor to deal with all the crap, that many of us don't. A special thanks to @miesk5 for his thankless wealth of info. The man spends a lot of time to look up stuff for people and post TONS of info for them. He is often overlooked for even a simple thanks, by the more selfish posters. Thank you moderators.
Stevo440 and Matco like this.
wyatt earp is offline  
Reply

  Ford Bronco Forum > Bronco Discussions > 1980-'96 Bronco Tech

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Bronco Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself. DO NOT USE Gmail.com accounts. If you only have a Gmail.com email please contact the administrator here

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome