95 Bronco build list, summer project - Ford Bronco Forum
 34Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 28 (permalink) Old 03-17-2017, 11:30 PM Thread Starter
Registered User
 
RLVBronco's Avatar
 
Join Date: Sep 2016
Location: Grand Rapids, Michigan
Posts: 249
Bronco Info: 1995 Ford Bronco Eddie Bauer Edition 5.8Liter
iTrader: (0)
Garage
Lightbulb 95 Bronco build list, summer project

Ok so this is going to be my summer project. Just figured I'd post my list, and let you guys have a peek ; Enjoy, and let me know what you think.

1. COMP Cams Thumpr Retrofit Hydraulic Roller Camshafts 35-600-8
Cam Style: Hydraulic roller tappet
1,900-5,600 RPM Range
Duration at 050 inch Lift: 227 int./241 exh.
Valve Lift with Factory Rocker Arm Ratio: 0.531 int./0.515 exh.
107 Lobe seperation

2. COMP Cams 17043-16
High Energy Rocker Arms Ford 289-351W V8
Ratio: 1.6
Stud Diameter: 3/8"


3. AFR - Airflow Research 1399 / 165cc Renegade Street Aluminum Cylinder Heads
165cc Intake Ports
68cc Exhaust Ports
58cc Combustion Chambers
3/8'' Rocker Arm Studs
Intake Valve, 1.900'' x 4.903'' o.a.l.
Exhaust Valve, 1.600'' x 4.955'' o.a.l.


4. Edelbrock 3881
Performer Truck 5.8L EFI Ford Intake Manifold
Idle-5,500
Light titanium powdercoated
Aluminum


5. 2.25" Dual exhaust / H-pipe included / free flowing muffler, no catalytic converters.

6. Hooker Headers 6912
Competition Headers 351W Ford
1.5'' x 27'' Primary Tubes
2.5'' x 8'' Collector
16-gauge

7. Boss Hog Night Stalker Torque Converters 24402 / E40D transmission
2400 stall

8. Cold Air Intake Kit 1988-1995 Ford F150/250/350 5.0/5.8L w/o Mass Air Sensor
1995 Ford Bronco 5.0/5.8L w/o Mass Air Sensor
Cleanable 8-PLy Cotton Filter

9. Airaid 400-527
PowerAid Throttle Body Spacer 1987-95 Ford F-150/Bronco 5.0L/5.8L
Improves Low End Torque And Throttle Response
Provides Stronger Mid-Range Power


*pics will be uploaded during and after project / if you would like to help me fund towards this project please let me know

huck2080 likes this.

RLVBronco is online now  
Sponsored Links
Advertisement
 
post #2 of 28 (permalink) Old 03-18-2017, 03:20 AM
Registered User
 
Join Date: Apr 2016
Location: Oregon
Posts: 244
Bronco Info: 1995 XLT 5.8 .040 Roller Cam X heads JBA headers 4" Skyjacker 33s 4:11s L/S rear Tru Trac front E4OD
iTrader: (0)
Stevo440 and Matco like this.
wyatt earp is online now  
post #3 of 28 (permalink) Old 03-18-2017, 07:19 PM Thread Starter
Registered User
 
RLVBronco's Avatar
 
Join Date: Sep 2016
Location: Grand Rapids, Michigan
Posts: 249
Bronco Info: 1995 Ford Bronco Eddie Bauer Edition 5.8Liter
iTrader: (0)
Garage
Quote:
Originally Posted by wyatt earp View Post
..... Whats your reason behind that emoji?

RLVBronco is online now  
 
post #4 of 28 (permalink) Old 03-18-2017, 10:27 PM
Registered User
 
Stevo440's Avatar
 
Join Date: Feb 2009
Location: Woodstock, GA
Posts: 35
Bronco Info: 1995 5.8L XLT, E4OD, Quad Shock Option, White ext/Biege leather int, OJ Mobile!!!
iTrader: (0)
Garage
Good one wyatt earp!!! I concur.
wyatt earp likes this.
Stevo440 is offline  
post #5 of 28 (permalink) Old 03-19-2017, 10:03 AM
Engineer
 
ToddACimer's Avatar
 
Join Date: Apr 2004
Location: Oshkosh, Wi
Posts: 13,161
Bronco Info: 95 Eddie Bauer
iTrader: (19)
So you're going to bolt $2500-3000 onto a stock bottom end and you're hoping for what?
Matco likes this.

1995 Ford Bronco Eddie Bauer 351W 2.5" RC Front Lift. JBG 3" Rear Springs. 17" M/T Classic III's and 285/70/17 Toyo Open Country A/T II, 4.56 gears trac-loc f/r. Street Toy
ToddACimer is offline  
post #6 of 28 (permalink) Old 03-19-2017, 08:29 PM Thread Starter
Registered User
 
RLVBronco's Avatar
 
Join Date: Sep 2016
Location: Grand Rapids, Michigan
Posts: 249
Bronco Info: 1995 Ford Bronco Eddie Bauer Edition 5.8Liter
iTrader: (0)
Garage
Quote:
Originally Posted by ToddACimer View Post
So you're going to bolt $2500-3000 onto a stock bottom end and you're hoping for what?
And what do you think will happen? And your numbers are way off bud.

RLVBronco is online now  
post #7 of 28 (permalink) Old 03-19-2017, 08:29 PM Thread Starter
Registered User
 
RLVBronco's Avatar
 
Join Date: Sep 2016
Location: Grand Rapids, Michigan
Posts: 249
Bronco Info: 1995 Ford Bronco Eddie Bauer Edition 5.8Liter
iTrader: (0)
Garage
Quote:
Originally Posted by Stevo440 View Post
Good one wyatt earp!!! I concur.
Go **** yourself, and that goes for you to earp.

RLVBronco is online now  
post #8 of 28 (permalink) Old 03-19-2017, 08:49 PM
Registered User
 
Join Date: Apr 2016
Location: Oregon
Posts: 244
Bronco Info: 1995 XLT 5.8 .040 Roller Cam X heads JBA headers 4" Skyjacker 33s 4:11s L/S rear Tru Trac front E4OD
iTrader: (0)
Telling people to F-off, isn't a good way to get help funding your project! Who asks for help funding anyway, loser?
Stevo440, Matco and Teal94 like this.
wyatt earp is online now  
post #9 of 28 (permalink) Old 03-19-2017, 09:04 PM
Registered User
 
Stevo440's Avatar
 
Join Date: Feb 2009
Location: Woodstock, GA
Posts: 35
Bronco Info: 1995 5.8L XLT, E4OD, Quad Shock Option, White ext/Biege leather int, OJ Mobile!!!
iTrader: (0)
Garage
wyatt earp I CONCUR AGAIN!!!!!
Matco, wyatt earp and Teal94 like this.
Stevo440 is offline  
post #10 of 28 (permalink) Old 03-19-2017, 09:17 PM
Registered User
 
Stevo440's Avatar
 
Join Date: Feb 2009
Location: Woodstock, GA
Posts: 35
Bronco Info: 1995 5.8L XLT, E4OD, Quad Shock Option, White ext/Biege leather int, OJ Mobile!!!
iTrader: (0)
Garage
Quote:
Originally Posted by RLVBronco View Post
Go **** yourself, and that goes for you to earp.
With an ATTITUDE and COMMENTS like that why are you even on this Site looking for "OUR" Advice, Opinions and HELP FUNDING YOUR PROJECT. We GAVE you ADVICE and OPINIONS and you doubted "US" at every turn. You seem to be the "EXPERT" in your own "DELUSIONAL" mind, so look in the mirror and ask yourself for all your "BIASED" answers. You are one ungrateful _____ (your choice). Have fun with your PROJECT cause "little boy", TIME SHALL TELL ALL..... Toodles
Matco, wyatt earp and Teal94 like this.
Stevo440 is offline  
post #11 of 28 (permalink) Old 03-19-2017, 10:36 PM
Engineer
 
ToddACimer's Avatar
 
Join Date: Apr 2004
Location: Oshkosh, Wi
Posts: 13,161
Bronco Info: 95 Eddie Bauer
iTrader: (19)
Quote:
Originally Posted by RLVBronco View Post
And what do you think will happen? And your numbers are way off bud.
I honestly think you'll bolt together an unreliable piece of shit that leaks oil and doesnt put out even 75% of the power you added up on paper. The heads alone are $1600 so my original estimate of $2500-3k is probably within a few pennies.

Maybe instead of that $125 throttle body spacer you should buy a block of scrap aluminum and polish it with $100 bill. At least then you could say you worked hard for the worthless piece of junk.

1995 Ford Bronco Eddie Bauer 351W 2.5" RC Front Lift. JBG 3" Rear Springs. 17" M/T Classic III's and 285/70/17 Toyo Open Country A/T II, 4.56 gears trac-loc f/r. Street Toy

Last edited by ToddACimer; 03-19-2017 at 10:41 PM.
ToddACimer is offline  
post #12 of 28 (permalink) Old 03-19-2017, 10:47 PM
Registered User
 
Join Date: Apr 2016
Location: Oregon
Posts: 244
Bronco Info: 1995 XLT 5.8 .040 Roller Cam X heads JBA headers 4" Skyjacker 33s 4:11s L/S rear Tru Trac front E4OD
iTrader: (0)
Stevo440 likes this.
wyatt earp is online now  
post #13 of 28 (permalink) Old 03-19-2017, 10:50 PM
Registered User
 
Stevo440's Avatar
 
Join Date: Feb 2009
Location: Woodstock, GA
Posts: 35
Bronco Info: 1995 5.8L XLT, E4OD, Quad Shock Option, White ext/Biege leather int, OJ Mobile!!!
iTrader: (0)
Garage
ToddACimer, I CONCUR!!!!
Matco and wyatt earp like this.
Stevo440 is offline  
post #14 of 28 (permalink) Old 03-19-2017, 11:43 PM Thread Starter
Registered User
 
RLVBronco's Avatar
 
Join Date: Sep 2016
Location: Grand Rapids, Michigan
Posts: 249
Bronco Info: 1995 Ford Bronco Eddie Bauer Edition 5.8Liter
iTrader: (0)
Garage
Quote:
Originally Posted by ToddACimer View Post
I honestly think you'll bolt together an unreliable piece of shit that leaks oil and doesnt put out even 75% of the power you added up on paper. The heads alone are $1600 so my original estimate of $2500-3k is probably within a few pennies.

Maybe instead of that $125 throttle body spacer you should buy a block of scrap aluminum and polish it with $100 bill. At least then you could say you worked hard for the worthless piece of junk.
I feel you really should go get some mental help, blowing up on a forums doesn't help you bud, the same goes for both of your two but plugs.

RLVBronco is online now  
post #15 of 28 (permalink) Old 03-20-2017, 12:01 AM
gone fish'n
 
jopes's Avatar
 
Join Date: Feb 2003
Location: Maggie's Nipples, Wyoming
Posts: 23,605
Bronco Info: pile of parts
iTrader: (4)
I moved this. Read the rules. Next time I will just start deleting the garble as I am not the only one seeing it.
Stevo440 likes this.

'01 F250, 444ci of straight piped oil burning fun. 4x4, 6 spd, GTP38R noise maker, Stage 2 injektorz. Lotsa fun!


Let's Go Fishing.
jopes is offline  
post #16 of 28 (permalink) Old 03-20-2017, 12:59 AM Thread Starter
Registered User
 
RLVBronco's Avatar
 
Join Date: Sep 2016
Location: Grand Rapids, Michigan
Posts: 249
Bronco Info: 1995 Ford Bronco Eddie Bauer Edition 5.8Liter
iTrader: (0)
Garage
Quote:
Originally Posted by jopes View Post
I moved this. Read the rules. Next time I will just start deleting the garble as I am not the only one seeing it.
I think it is unnecessary for earp, steve, and creamer to just post on peoples threads starting crap. I didn't make this thread to argue, I made it to get suggestions and to see what people would think in a mature manner.

RLVBronco is online now  
post #17 of 28 (permalink) Old 03-20-2017, 01:07 AM
gone fish'n
 
jopes's Avatar
 
Join Date: Feb 2003
Location: Maggie's Nipples, Wyoming
Posts: 23,605
Bronco Info: pile of parts
iTrader: (4)
again, READ the rules.

The build forum is for builds. Not to get info on what people think.

Sorry if people are posting the way they are, wait no I am not sorry. They are tired of seeing multiple posts from you on the same exact thing or slightly reworded.

We have been over this. Guess it's too hard for you to comprehend.
Stevo440, Mikey350, Matco and 2 others like this.

'01 F250, 444ci of straight piped oil burning fun. 4x4, 6 spd, GTP38R noise maker, Stage 2 injektorz. Lotsa fun!


Let's Go Fishing.
jopes is offline  
post #18 of 28 (permalink) Old 03-20-2017, 01:34 AM
Registered User
 
Join Date: Nov 2009
Location: Redford, MI
Posts: 3,306
Bronco Info: '96 Black 302 XLT - '94 Green 351 E. B. both are E4OD, 3.55 axles, 31 10.50x15
iTrader: (3)
Quote:
Originally Posted by jopes View Post
again, READ the rules.

They are tired of seeing multiple posts from you on the same exact thing or slightly reworded.

We have been over this. Guess it's too hard for you to comprehend.
Finally!! there were a dozen threads all the same - make it STOP!

Thanks @jopes
Stevo440 likes this.

"The simplest solution is usually the best solution" - Occam's Razor

"The significant problems we face cannot be solved at the same level of thinking we were at when we created them." - Albert Einstein
Mikey350 is offline  
post #19 of 28 (permalink) Old 03-20-2017, 01:48 AM Thread Starter
Registered User
 
RLVBronco's Avatar
 
Join Date: Sep 2016
Location: Grand Rapids, Michigan
Posts: 249
Bronco Info: 1995 Ford Bronco Eddie Bauer Edition 5.8Liter
iTrader: (0)
Garage
Quote:
Originally Posted by jopes View Post
again, READ the rules.

The build forum is for builds. Not to get info on what people think.

Sorry if people are posting the way they are, wait no I am not sorry. They are tired of seeing multiple posts from you on the same exact thing or slightly reworded.

We have been over this. Guess it's too hard for you to comprehend.
are you ****ing kidding me, I've never made a whole list about all of my parts/ build... And how is this not a build...

RLVBronco is online now  
post #20 of 28 (permalink) Old 03-20-2017, 01:50 AM
Registered User
 
Stevo440's Avatar
 
Join Date: Feb 2009
Location: Woodstock, GA
Posts: 35
Bronco Info: 1995 5.8L XLT, E4OD, Quad Shock Option, White ext/Biege leather int, OJ Mobile!!!
iTrader: (0)
Garage
jopes and Mikey350, I CONCUR!!!! I and others have tried to help in a Technical and ADULT way as possible, but enough is enough.... Thank God for The Rules! Thanks
jopes likes this.
Stevo440 is offline  
Reply

  Ford Bronco Forum > Bronco Discussions > 1980-'96 Bronco Tech

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Bronco Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself. DO NOT USE Gmail.com accounts. If you only have a Gmail.com email please contact the administrator here

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome