milehighcowboy
04-06-2008, 11:12 PM
i am looking to sell my 95 f150 with a good running 302 (new oil, plugs, and wires) Dual batteries (one mounted in bed with battery box).
ZF tranny with over drive and granny gear (possable syncro rebuild needed, or the slave may just need bled more), BORG-WARNER 1356 T-Case .
Dana 44 front axle (TTB), manual lock out hubs, 4.10 gears, ARB, and new U joints;
Ford 8.8 rear axle, 4.10 gears, ARB; Warn 9000xi Winch, mountable front and rear (rear needs battery connectors hooked up already purchased just never did it);
6" super lift (extended radius arms, blocks in the rear);
35" BFG mudders (70-80% tread, four mounted one not, 1 gumbo mudder mounted for spair); two sets of wheels (one set mounted with 35's, second with 31's or 33's near zero tread good emission testers);
desert racing front fenders i also have one paint matching metal fender
i forgot to add that I also a complete recovery bag (shackles, d rings, tree strap, tow strap (brand new), and a knoted tow strap (very used i cant get it untied) gloves, and a water proof bag with lots of pockets in and out for more stuff.
A set (x4) of quick deflators for fast and easy deflation of tires for traction.
A complete CO2 system, which includes a near full and brand new (less than a year) 20lb tank, a 150 psi regulator with male quick disconnect, 25ft of hose with female quick disconnects on both ends, a tire chuck with integrated psi gauge male quick disconnect, and a detached air guage with fine tune button (so you can get to that magic 8 or 9 PSI when airing down).
Also a high lift jack, two spair shocks, two off road lights (one planning on hooking up in truck bed) other glass is broken but buld is intact and does work, and a steering stabilizer with no bracketry.
pics at....
http://www.facebook.com/album.php?ai...1&id=586460626
I just would like to make my way to a new project.....thinking a muscle car of sorts. so i am open to trades for a running project muscle car pre 80's, or $3,000 cash.
drapanwol16@aol.com
720 275 2193
or just pm me
Ben
http://i45.photobucket.com/albums/f58/milehighcowboy/SANY0242.jpg
http://i45.photobucket.com/albums/f58/milehighcowboy/SANY0244.jpg
http://i45.photobucket.com/albums/f58/milehighcowboy/SANY0246.jpg
http://i45.photobucket.com/albums/f58/milehighcowboy/SANY0241.jpg
with out the topper on
http://i45.photobucket.com/albums/f58/milehighcowboy/f150.jpg
ZF tranny with over drive and granny gear (possable syncro rebuild needed, or the slave may just need bled more), BORG-WARNER 1356 T-Case .
Dana 44 front axle (TTB), manual lock out hubs, 4.10 gears, ARB, and new U joints;
Ford 8.8 rear axle, 4.10 gears, ARB; Warn 9000xi Winch, mountable front and rear (rear needs battery connectors hooked up already purchased just never did it);
6" super lift (extended radius arms, blocks in the rear);
35" BFG mudders (70-80% tread, four mounted one not, 1 gumbo mudder mounted for spair); two sets of wheels (one set mounted with 35's, second with 31's or 33's near zero tread good emission testers);
desert racing front fenders i also have one paint matching metal fender
i forgot to add that I also a complete recovery bag (shackles, d rings, tree strap, tow strap (brand new), and a knoted tow strap (very used i cant get it untied) gloves, and a water proof bag with lots of pockets in and out for more stuff.
A set (x4) of quick deflators for fast and easy deflation of tires for traction.
A complete CO2 system, which includes a near full and brand new (less than a year) 20lb tank, a 150 psi regulator with male quick disconnect, 25ft of hose with female quick disconnects on both ends, a tire chuck with integrated psi gauge male quick disconnect, and a detached air guage with fine tune button (so you can get to that magic 8 or 9 PSI when airing down).
Also a high lift jack, two spair shocks, two off road lights (one planning on hooking up in truck bed) other glass is broken but buld is intact and does work, and a steering stabilizer with no bracketry.
pics at....
http://www.facebook.com/album.php?ai...1&id=586460626
I just would like to make my way to a new project.....thinking a muscle car of sorts. so i am open to trades for a running project muscle car pre 80's, or $3,000 cash.
drapanwol16@aol.com
720 275 2193
or just pm me
Ben
http://i45.photobucket.com/albums/f58/milehighcowboy/SANY0242.jpg
http://i45.photobucket.com/albums/f58/milehighcowboy/SANY0244.jpg
http://i45.photobucket.com/albums/f58/milehighcowboy/SANY0246.jpg
http://i45.photobucket.com/albums/f58/milehighcowboy/SANY0241.jpg
with out the topper on
http://i45.photobucket.com/albums/f58/milehighcowboy/f150.jpg