shawnhalolush
05-02-2008, 08:33 PM
Hi Guys,
Do to my new job which I have to commute to, I have to sell my '90 bronco. It has 130,xxx miles on it with a 302 and an E4OD trans. It has 35" tires and what I believe is a 2.5 inch lift ( I measured the rear blocks) I have put a lot of work and new parts into it since I bought it in Oct. Some parts include: new gas tank, headlights, tie rods, 4 shocks, IAC, TPS plugs and wires, filters and pcv, replaced brake lines, new kenwood cd player, rear window motor, pass. side window motor, pw buttons, fuel pressure reg., and the egr position sensor. It has NO rust on any of the wheel wells. Little rust on the tailgate and some on the bottom of the doors along with a few scattered scratches. It does need a few things though, and they are: fronts brakes ( rotors and pads are included with this truck), Ball joints ( Included as well), power door lock actuators and passenger pw buttons. The truck also needs an alignment badly...It suffers from death wobble at 40 and above. I was going to do the front brakes and ball joints along with an alignment myself, but my lock nut socket is on back order and I need to get rid of it asap. The truck does drive and shift fine, and is very clean. I'm asking 2000 obo.
http://<a href="http://s299.photobucket.com/albums/mm289/shawnhalolush/?action=view¤t=0502081832.jpg" target="_blank"><img src="http://i299.photobucket.com/albums/mm289/shawnhalolush/0502081832.jpg" border="0" alt="Photobucket"></a>
http://<a href="http://s299.photobucket.com/albums/mm289/shawnhalolush/?action=view¤t=0502081831a.jpg" target="_blank"><img src="http://i299.photobucket.com/albums/mm289/shawnhalolush/0502081831a.jpg" border="0" alt="Photobucket"></a>
http://<a href="http://s299.photobucket.com/albums/mm289/shawnhalolush/?action=view¤t=0502081831.jpg" target="_blank"><img src="http://i299.photobucket.com/albums/mm289/shawnhalolush/0502081831.jpg" border="0" alt="Photobucket"></a>
http://<a href="http://s299.photobucket.com/albums/mm289/shawnhalolush/?action=view¤t=0502081830c.jpg" target="_blank"><img src="http://i299.photobucket.com/albums/mm289/shawnhalolush/0502081830c.jpg" border="0" alt="Photobucket"></a>
http://<a href="http://s299.photobucket.com/albums/mm289/shawnhalolush/?action=view¤t=0502081830b.jpg" target="_blank"><img src="http://i299.photobucket.com/albums/mm289/shawnhalolush/0502081830b.jpg" border="0" alt="Photobucket"></a>
http://<a href="http://s299.photobucket.com/albums/mm289/shawnhalolush/?action=view¤t=0502081830.jpg" target="_blank"><img src="http://i299.photobucket.com/albums/mm289/shawnhalolush/0502081830.jpg" border="0" alt="Photobucket"></a>
http://<a href="http://s299.photobucket.com/albums/mm289/shawnhalolush/?action=view¤t=0502081829.jpg" target="_blank"><img src="http://i299.photobucket.com/albums/mm289/shawnhalolush/0502081829.jpg" border="0" alt="Photobucket"></a>
http://<a href="http://s299.photobucket.com/albums/mm289/shawnhalolush/?action=view¤t=0502081830a.jpg" target="_blank"><img src="http://i299.photobucket.com/albums/mm289/shawnhalolush/0502081830a.jpg" border="0" alt="Photobucket"></a>
Do to my new job which I have to commute to, I have to sell my '90 bronco. It has 130,xxx miles on it with a 302 and an E4OD trans. It has 35" tires and what I believe is a 2.5 inch lift ( I measured the rear blocks) I have put a lot of work and new parts into it since I bought it in Oct. Some parts include: new gas tank, headlights, tie rods, 4 shocks, IAC, TPS plugs and wires, filters and pcv, replaced brake lines, new kenwood cd player, rear window motor, pass. side window motor, pw buttons, fuel pressure reg., and the egr position sensor. It has NO rust on any of the wheel wells. Little rust on the tailgate and some on the bottom of the doors along with a few scattered scratches. It does need a few things though, and they are: fronts brakes ( rotors and pads are included with this truck), Ball joints ( Included as well), power door lock actuators and passenger pw buttons. The truck also needs an alignment badly...It suffers from death wobble at 40 and above. I was going to do the front brakes and ball joints along with an alignment myself, but my lock nut socket is on back order and I need to get rid of it asap. The truck does drive and shift fine, and is very clean. I'm asking 2000 obo.
http://<a href="http://s299.photobucket.com/albums/mm289/shawnhalolush/?action=view¤t=0502081832.jpg" target="_blank"><img src="http://i299.photobucket.com/albums/mm289/shawnhalolush/0502081832.jpg" border="0" alt="Photobucket"></a>
http://<a href="http://s299.photobucket.com/albums/mm289/shawnhalolush/?action=view¤t=0502081831a.jpg" target="_blank"><img src="http://i299.photobucket.com/albums/mm289/shawnhalolush/0502081831a.jpg" border="0" alt="Photobucket"></a>
http://<a href="http://s299.photobucket.com/albums/mm289/shawnhalolush/?action=view¤t=0502081831.jpg" target="_blank"><img src="http://i299.photobucket.com/albums/mm289/shawnhalolush/0502081831.jpg" border="0" alt="Photobucket"></a>
http://<a href="http://s299.photobucket.com/albums/mm289/shawnhalolush/?action=view¤t=0502081830c.jpg" target="_blank"><img src="http://i299.photobucket.com/albums/mm289/shawnhalolush/0502081830c.jpg" border="0" alt="Photobucket"></a>
http://<a href="http://s299.photobucket.com/albums/mm289/shawnhalolush/?action=view¤t=0502081830b.jpg" target="_blank"><img src="http://i299.photobucket.com/albums/mm289/shawnhalolush/0502081830b.jpg" border="0" alt="Photobucket"></a>
http://<a href="http://s299.photobucket.com/albums/mm289/shawnhalolush/?action=view¤t=0502081830.jpg" target="_blank"><img src="http://i299.photobucket.com/albums/mm289/shawnhalolush/0502081830.jpg" border="0" alt="Photobucket"></a>
http://<a href="http://s299.photobucket.com/albums/mm289/shawnhalolush/?action=view¤t=0502081829.jpg" target="_blank"><img src="http://i299.photobucket.com/albums/mm289/shawnhalolush/0502081829.jpg" border="0" alt="Photobucket"></a>
http://<a href="http://s299.photobucket.com/albums/mm289/shawnhalolush/?action=view¤t=0502081830a.jpg" target="_blank"><img src="http://i299.photobucket.com/albums/mm289/shawnhalolush/0502081830a.jpg" border="0" alt="Photobucket"></a>