http://www.kanyon-crawlers.com/forum/forum_posts.asp?TID=18&PN=1&TPN=1

I talked to the guy, and he has built sliders for Bronco's before. He also builds bumpers and all sorts of crazy stuff.

Is there any one interested in possably doing a group buy?? I havent approached him about it yet, but seeing if anyone else is interested. He's located in Mt. Angel, not too far from Salem Or. I like the way his sliders and bumpers look on his Toy's and would like to have something like that to work on my Bronco. So...if I can get enough people interestede in a group buy I'll talk to him about it.

Any pics and would he ship?

Pics and some sort of pricing. And some way to get em down to me would be sweet. I'm about 1.5 hours from Grants Pass and go there frequently.

possibly, there is nobody around me that can bend tube which is a little bit of a problem. Find out what kind of tube he uses because I think full size trucks should have .188 wall rather than the .120 most people use.

I'd possibly be down. Need a little more info though.

I'd possibly be down. Need a little more info though.

what info would you like??? I already sent him a PM about what thickness of material, if he would ship, group buy, and cost, and soon as I get that info I'll relay that info to here :thumbup

Specs like size tubing, how far outer bar sticks, length of slider and mounting legs, how many legs, mounting plates, etc.?

Looks like he has his PH.# on the page we can contact him directly.Lives not far away from me.I need some rock sliders just so I can get in my bronco.Suspension seats are a pain to get into especially when I have 35,s too.

what info would you like??? I already sent him a PM about what thickness of material, if he would ship, group buy, and cost, and soon as I get that info I'll relay that info to here :thumbup
Sounds good.

here's an update...
group buy would be possible if there was enough pieces... i do ship or meet half way on occasions... i use 1 3/4 .120 wall and have never had an issue, but can also build them to someones preference also... my sliders i use 4 mounting legs with plates for the frame...

-- Previous Private Message --
Sent by : rcracerx
Sent : 14 October 2008 at 12:34am


hey Iv'e been getting a few responses from the other Bronco guys...I'll just copy and paste what they are asking, and I was wndering if you would be willing to do a group buy as well?? And I woulnd't have a problem dropping my bronco off if you need one to measure with to.

knowing the bronco frame, he wouldnt be able to get 4 legs in there. Sounds like they are decent though.

yeah actually there's quite a few local guys around here with fabrication shops, I know one of them in blackdiamond and another local to tacoma :)

looks from the website he does awesome work.

hey when did your s10 take a puke??

Tell you what RCracerx (since I dont feel like signing up for another forum), find out what kind of discount he cant get us for a group buy. Say 3-5 sets of sliders = % and 5+ = a higher %. Im interested in these sliders mainly since it seems like a good deal for $175. I would prefer to have my center piece to be made of .188 but I dont know what the weight differences are. I still dont see how he can get 4 legs on the sliders with the FSB frame, so maybe he might need a local FSB for a mock up.

Hell I would be happy if the group buy was just free shipping. :thumbup I would also like to know if he designs these sliders as bolt-on or weld-on because I would prefer a set of bolt-ons, but I would also like to see his mounting bracket style (hence the mock up bronco).

hey when did your s10 take a puke??

hehe about a few months back :thumbup

but i might be interested myself if he can get a good deal

hello guys, i can build them to your specifications... i made a mistake in posting that they have 4 legs(my toyota and chevy ones are 4) the bronco ones have 3 legs with square 1/4" plates for the frame... i've built them for quite a few early broncos and one later bronco but didnt keep measurements... my sliders are usually weld on but if you guys are more into bolt on that could be a option with a mock up rig... any questions feel free to pm me...

thanks,
Derek

checked out the pics in the link, those look very nice Derek. If I had some kinda truck, I'd hit you up. Maybe next year, one of my goals in life is to get another rig of some sort.

ok so if you guys wanna do a group buy here is what i could do for you guys... 1-7 sets... $165.00 ea plus shipping, 8+ sets... $145.00 plus shipping... let me know what you guys think...

thanks,
Derek@ Revenge-Fab

ill be in for 1 if we can get it to $125 for 10+ sets? are the coming bare metal or primer or what? and will you be making custom measurements for each of the body style of broncos?

10+ sets i will do 125.00 plus shipping... they are bare metal... i will do measurements for what fit each year the best...

thanks

I would be interested in 1-2 sets for 78-9s

I'd be interested for one set. 96 fsb bolt-on or weld.

seems i might need to back out, got an offer from another person for a very reasonable price.