Hey guys, I was wondering how hard it is to pull the front 3rd member from the TTB. Are their any special tools that are required? Reason I ask is because I think i may have something wrong in the spider gears and were gonna replace them with a locker... Any help would be appreciated.

Hey guys, I was wondering how hard it is to pull the front 3rd member from the TTB. Are their any special tools that are required? Reason I ask is because I think i may have something wrong in the spider gears and were gonna replace them with a locker... Any help would be appreciated.im pretty sure there a right up, i'll look

got it here http://www.2bigbroncos.org/technical/front_dana44.html

or type in big bronco tech on yahoo

Thanks for the link... It turns out I didn't have the problem in the spiders so I dont need to open it up...

All you need to do is pull all the bolts on the front and then there are two on the driver side of it. Also you have to pull the driver side axle first. When you take to 3rd member out the inner passenger axle is C-cliped into it and then there is a boot where that axle meets the outter passenger axle. So just pull on that and till it come out!