If anybody in Florida, Georgia or near by wants to send me some info as far as suggestions, like places we could meet up and go wheeling, I would be happy to put something together. If we could get a group of 5 or 6 that would be great. Post a message here or drop me a PM what months are good or bad for you, we could do Ocala or anything as far as I'm concerned, I just want to go wheelin!!! :D :D :D

we should try to plan a trip for all the east coasters and anyone else that wants to drive to north carolina and go to tellico so what do you think about next spring or fall 2004


my vote is for spring 2004 sometime in like april

i'm into going just about anywere, just gotta get the bronco running. wife has me redoing the entire house. thats kinda taking up all my time and depleating the bronco fund. damn tile floor cost me more than the 10.25 rear and a d60 front end. :roll:

Yeeah right now the bronco is going through its build getting a 1972 351w with performer cam and intake holley four barrel and then its getting a 4/6in lift and regeared with 4.11 and locked inthe rear and a fresh true trac up front then I will be ready to wheel.

I know whats up with the 4/6 inlift havnt decided if I am going 4 or 6 want 6 but tow a trailer and I am not sure it will the safest bet

80bronco, from my own experiance, go bigger than smaller. i bought my 4" thinking the same thing. wish it was an 8" maybe one day when i do an sas i'll get the lift i want.

Yeeah right now the bronco is going through its build getting a 1972 351w with performer cam and intake holley four barrel and then its getting a 4/6in lift and regeared with 4.11 and locked inthe rear and a fresh true trac up front then I will be ready to wheel.

I know whats up with the 4/6 inlift havnt decided if I am going 4 or 6 want 6 but tow a trailer and I am not sure it will the safest bet

You can always tow a trailer with your lift as long as you get a drop down hitch ball, it will keep the trailer level and the truck would still be lifted.

My .02

Allcruisen :pimp :gousa

thanks for your opinon I am starting to think I will be ok with the 6 in I just am worried alittle want to get it right the first time since I have to tow the travel trailer to all wheeling events

Hey boys count me in my truck is gone be shiped in late september to Virginia and I have to drive it to Jacksonville where Im goin to be next few years

Mark me or as a "Definate Maybe!
We'll see what work decides to do with me. :roll:

sweet, if oscar and pepe move down, we will have a good group of fsb members in florida. we will all have to get a group run going.

So is the general consensus that we hold of until Oscar and Pepe' get down here?

I like the sounds of that how about april of next year. Will that be enough time for everyone to get here are ready.

Don't wait up on my account. Go, wheel and scout it all out.
If it's all good, it will still be there when I show up!

I'd hate for anyone to miss a wheelin trip becouse of me! Besides... I work for a bunch of flakes!

i say we get who ever his already here and get some stuff going. as soon as i get my truck running, i'll be looking to get it out on the trails. maybe my the time everybody else moves down here, we will have found some good places to go. time to run all those heeps off the trails guys :blue:

hey pepe, your not the only one that works for flakes.

i say we get who ever his already here and get some stuff going. as soon as i get my truck running, i'll be looking to get it out on the trails. maybe my the time everybody else moves down here, we will have found some good places to go. time to run all those heeps off the trails guys :blue:

I'm with you Gearhead, the sooner the better for me. :thumbup

my parts came in to finish my exhaust system, so hopefully i can get it on this weekend. just have to have a shop weld in the nut into my header for my o2 sensor. then gonna take it to a shop here in town and have them hook it up to their computer. i cant get it to read running codes, last time it did this the puter was fryed. hopefull my tranny will work right if i replace the puter, if that is indeed it. got my cb installed too, just need the antenna. mostly little stuff, but i cant seem to find the time.

I hear ya man, there never is enough time..I had to hitch a ride to work so I could leave my truck with a buddy who is going to replace my exhaust manifolds today..Heading out to Hanna park here in Jax to do some camping. Just shout at me whenever you get everything squared away, I'm not going anywhere.

i hear ya dude. just moved again,redoing the house. every nite i come home, i'm painting, yardwork, or working on the floor. i'm tileing the house myself. the house is taking a lot of my time. but gonna try to get some stuff done to the truck this weekend.

Count me in guys..just shoot me a line when a time and place is hammered out and I'm there! :thumbup

blaze, where is norman park at? my wife has family in and near douglas. i was thinking of taking my bronco up there if i ever get it going. anything going on in your neck of the woods?

Jermil01, E-mail me your phone # at Crashndent@bellsouth.net, i got a few places here in Jacksonville fl and a couple of people already wanting to go.

Oscar, that is one badass bronco bro.

Norman Park is just outside Tifton. I'm about an hour +/- from Douglas. Lemme know if you get up this way, even if ya can't bring your rig. I also see someone off and on from the Deland area, so I may be down your way too.

Looks like we might have a run going on up here near Jax in the next week or two, Crashndent has a line on some good places to go.

i dont know how muck longer it will be before i'm up and running, but i really hope to be by the holiday weekend, need to make a parts run a couple of hours south of me.
blaze, i wanna take my truck up to GA once i got her running good. i'll give ya a ring when that happens.
i think we almost have enuff guys to start a FL/GA fullsise bronco chapter.

i think we almost have enuff guys to start a FL/GA fullsise bronco chapter.

The Dixie chapter of FSB.com???
I'm there dude! rockon :thumbup rockon

:cheers: :cheers: :cheers: Let's do it!!!

if anyone wants to wheelin' the area of Mobile AL. Let me know, I'll get a hecll of a ride together

I'd like to, but its too far of a drive for me right now, I'd like to get over to Pell at some point, I hear its great over there.

Croom and Richloam are pretty nice areas. I dont know all the trails yet but I am working on it. These are in Mid-Florida, Brooksville area at sr 50 and 301 and sr 50 and 471. Ocala is sweet but I see you just went. Ocala Wildlife Management Area: (382,408 acres in Marion, Putnam and Lake counties)
Richloam Wildlife Management Area: (56,401 acres in Hernando, Pasco, Sumter, and Lake counties)

Yea Ocala was a blast..check out these Superford sites for all the pics:
Blaze
jermil01
Ogeechee4x4
GearHead


P.S. welcome to the site, and to the Dixie Chapter of FSB!
Be sure and vote for top4x4 twice a day, and FOTM once a month.
Post an introduction..let the boys know you're in town..and what kinda ride ya got (it'll help when asking technical stuff!)

I live in Pt St Lucie so if any one is near drop me a line

Tony

I'm about an hour and a half by 95 from you..let me know when you want to go wheeling and we'll meet up somewhere. Ocala is in the middle..

hey I like your bronco what kind of lift do you have and where did ya get that bumper ???