View Full Version : Interior Lighting


Blaze
04-26-2003, 10:10 PM
I recently bought an interior light on e-bay for a '00-'03 superduty on a tip from blueoval78, and damn is it smooth looking. It swapped right in with no alterations and is much sleaker and brighter than the factory one.
It was purchased from dick's auto. I sent him an e-mail and told him he should offer everyone on this site a flat rate for purchase and shipping, that he could prolly get a few sales that way. It's way cool. For pictures see the "new pics, lift, visor lights, and interior lights" post under "General chit-chat" I highly recomend. :thumbup

Broncobob
04-27-2003, 12:17 AM
I did the same thing as you blaze, got it from dicks at ebay. 13 bucks shipped, 15 maybe. Anyways, the installation is very time consuming and takes alot of fabrication, luckily, I wrote down the steps I took for everyone to follow.

1: Unscrew old light
2: Scew new light in

Damn it was tough, :lol: but the added light is incredible compaired to the stock one. Also looks like it was meant to be, not that stupid chrome one that doesn't flow with the interior pannels, not to mention emits orange/yellowish light.

Anyways, as a tip, he was offering on e-bay that they were tan dome lights....when I sent the money I requested if he could find me a gray one to match my gray interior, sure enough a gray one came in the mail. Great guys to bid for.

Blaze
04-27-2003, 10:55 AM
Yea it does flow well. Looks very smooth. When I got mine I actualy bid on a gray one, but I've seen the tan ones listed so we know he has at least two colors :shrug Anyway you can't beat it for an inexpinsive, easy, and very practical mod. :thumbup

BikerPepe`
04-27-2003, 12:14 PM
:nopics

plug ugly
04-27-2003, 12:58 PM
for you later model guys, did you just have the dome light or did you have the whole overhead consol thing? i have the big one and the lights never worked in my 94. I farted around with it, but there were always more important things to do. that does look nice and has motivated me.

Broncobob
04-27-2003, 01:53 PM
for you later model guys, did you just have the dome light or did you have the whole overhead consol thing? i have the big one and the lights never worked in my 94. I farted around with it, but there were always more important things to do. that does look nice and has motivated me.

I just have the regular dome light in my 94.
http://www.rockymountainbasketcompany.com/images/domelight.jpg

Dustin
04-27-2003, 02:00 PM
i want one! i need a gray one tho....I would also like to have one of those overhead units like in the EB

Crazed
04-27-2003, 02:10 PM
I tried to find them on e-bay...No luck. anyone have a link??

Broncobob
04-28-2003, 01:50 AM
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33701&item=2413121998

This is the Dick's auto parts guy. The link here is for a black one, you might want to e-mail him and ask for different colors if you don't want black. Also, next to his name, click view other items, and it takes you to everything he has on ebay. He usually has 2 or 3 auctions for the dome lights at one time, but this is the only one I could find currently.

6 Day's left, and don't you all go outbid yourselves....

Crazed
04-28-2003, 05:01 AM
Cool...I just clicked buy it now... should be on the way soon.

jermil01
04-28-2003, 10:07 AM
Sweet, I like that a lot, much better than my pitted out chrome one. Definitely looks like it would be worth the investment. :cheers:

plug ugly
04-28-2003, 10:59 AM
is that the light that is right near the trim on the shell or up front between the visors? ( i think it is the former, in which case it would work for me too)

Dustin
04-28-2003, 01:38 PM
its right by the trim for the shell

Big Mike C.
04-29-2003, 12:02 PM
I just went down to Napa and bought a red trailer light...took off my old domelight put on the new red one, and now I am all stealthy cool! :cheers:

Crazed
05-08-2003, 08:28 PM
Ok, just got it, now I get to go try to put it in!!

Lookinfurfun
05-08-2003, 08:54 PM
I just went down to Napa and bought a red trailer light...took off my old domelight put on the new red one, and now I am all stealthy cool!

Roxanne.....you don't have to turn on the red light........Pimpin' ain't easy :lol:

Swamp Donkey
05-08-2003, 11:04 PM
http://www.superford.org/registry/vehicles/users/106/75/Dcp00618.jpg

Heres mine from a 97 F150

Crazed
05-09-2003, 12:50 AM
I got mine in,....Still need to run a hot wire to make the map lights work, Ill do that this weekend.

http://www.superford.org/registry/vehicles/users/2721/1725/5-8-03_026.jpg

Dustin
05-09-2003, 01:27 AM
damnit i cant find an gray one on ebay

deergeo
05-09-2003, 08:10 AM
Anyone...Will that style work on the 80-86's? Without too much redo

jermil01
05-09-2003, 09:48 AM
damnit i cant find an gray one on ebay

I'll take any color, Dustin when you get a sec, could you kick me the link on ebay? :mrgreen:

Broncobob
05-09-2003, 11:17 AM
damnit i cant find an gray one on ebay

Did you e-mail that guy at dicks auto parts yet?

jermil01
05-09-2003, 11:33 AM
You guys conviced me..I just bought the tan one off of Plastic Monkey for $20...It should look okay with my blue interior.. :mrgreen:

Crazed
05-09-2003, 01:44 PM
Buy some interior paint.

Crazed
05-09-2003, 01:46 PM
Anyone...Will that style work on the 80-86's? Without too much redo

It looks like the same hookups for the standard light so I will say yes.

We also need to run a hot wire up there to make the map lights work.

jermil01
05-09-2003, 03:20 PM
Buy some interior paint.

Good idea!!

Crazed
05-09-2003, 03:23 PM
I painted my console lid, it used to be tan.

Crazed
05-09-2003, 03:24 PM
OOps forgot the pic...

http://www.superford.org/registry/vehicles/users/2721/1725/4-24-03_012.jpg

jermil01
05-09-2003, 03:26 PM
Good save crazed, you did a good job on that, how'd you apply the paint?

Swamp Donkey
05-09-2003, 03:27 PM
My pic above is in my 86, just wired right up.

You can find these in junkyards. There are plenty of 97+ F-trucks. I think I paid $10

Crazed
05-09-2003, 03:31 PM
It was a rattle can, Plasti-kote vinyl color

jermil01
05-09-2003, 03:38 PM
It was a rattle can, Plasti-kote vinyl color

Cool, when I get my dome light, maybe I'll be able to find some plasti kote in blue to match.

Crazed
05-10-2003, 11:17 PM
I got the Map lights to work....

put power to this point...
http://www.superford.org/registry/vehicles/users/2721/1725/5-10-03_011.jpg
Now they work!!
http://www.superford.org/registry/vehicles/users/2721/1725/5-10-03_022.jpg

blueoval78
05-10-2003, 11:24 PM
anyone notice that it kind of site croaked, i tried to fix mine, but it looks like it will awlawys have a bit of a gap, atleats until i redo my headliner with some thinker fabric

jermil01
05-23-2003, 10:24 AM
Help, attempted to wire my new dome light last night, but evidently my electrical skills were not up to the task..After several blown fuses I finally figured out which wires not to put together, unfortunately when I did get it wired to where the dome light worked and the map lights came on, the dome light would come on when the door was closed and go off when the door was open :damn: :damn: :damn: ..Something must have been reversed right, only I can't figure out what?? So its 12:00 at night before I decided to call it quits and leave the two wires hanging from the open hold in my headliner..The dome light I bought was from a 2002 F150, it came with the plug, pictured below. The plug has three wires, the green with the stripe, the solid black and the black with the stripe..The stock dome light wired up with only two wires..The green with the stripe and the black with the stripe..What goes where, what did I do wrong, please help??!!??

http://www.superford.org/registry/vehicles/users/4765/2896/plug.jpg

http://www.superford.org/registry/vehicles/users/4765/2896/wiring.jpg

Crazed
05-23-2003, 01:19 PM
I only put power to the one point above, and the power for the dome light came from the rear screw like it was stock.

jermil01
05-23-2003, 01:28 PM
I cut both of the wires from the stock set up and just wired them directly instead of screwing it in..did the red wire in your pic go to the green wire?

Crazed
05-23-2003, 04:57 PM
Red wire in my pic went all the way to hot power...that one does the Map lights.

jermil01
05-23-2003, 05:03 PM
Now I'm completely confused..I don't believe I saw any red wires up there..

1982bronco
05-23-2003, 06:37 PM
i think Crazed put the red wire there. for the domelights.

Dustin
05-23-2003, 10:17 PM
the colors of the wires may change do to the year of the vehicle. you need to get a test light and test the wire to see if its power or not.

Crazed
05-26-2003, 08:14 PM
Yes..I ran the red wire from a full time power point so the maplights will work any time.

Dustin
05-30-2003, 11:55 PM
ok people that dont know how to install a dome light :roll:

I had to order mine and it finally came in today so I got it installed. If anyone needs the part number I can get that. It cant be easier, just unbolt the old and bolt in the new and everything works like a charm.

blurry pic but leave thosewire connetors where they are since they will work with the new one. both those wires have power, one is for the dome light and the other for the map lights and the 3rd bolt grounds everything through the body
http://www.supermotors.org/getfile/172901/fullsize/domelight2.JPG

ok I lied, you have to cut a little and swap a little plastic peice so this may get tricky. see that little dirty yellow platic dohicky? swap that from the old light to the new. ok so your wondering how to get the light to sit level? just cut that little tit off just to the right of that little plastic bracket you just swaped over. cut a little more than is shown in the picture since I wasent done when I took that.
http://www.supermotors.org/getfile/172900/fullsize/domelight.JPG

all done! sits level and matches nicely. It accually matches better in person than in that picture
http://www.supermotors.org/getfile/172902/fullsize/domelight3.JPG

plug ugly
05-31-2003, 12:13 AM
part #? How much and where did you get yours?

Dustin
05-31-2003, 12:32 AM
light- F8DZ-13776-AAA
lens- F4DZ-13783-A

ran me about 28 bucks or so from work....I got sick of looking on ebay for the right color plus I got it cheaper anyway

blueoval78
05-31-2003, 10:53 AM
ill have to cut my tit off so it looks level too, thanks for that tit, i mean tip

plug ugly
05-31-2003, 12:58 PM
yeah, I think Ford only wants like 28 bucks too. I was asking them the oher day and i think thats what they said. Looks good, is there eally much better light to be had?

blueoval78
05-31-2003, 08:16 PM
like day and night, literally

Dustin
05-31-2003, 09:56 PM
well your getting a deal then damon....they list for well over 28 bucks. and yeah they are worth the money I think, big difference in light and look better too.

Crazed
06-01-2003, 02:37 AM
My truck only had the one wire running to the mount, so I had to run another to do the map lights.

jermil01
06-02-2003, 09:31 AM
Thanks for the pics Dustin, finally got mine wired correctly..will post pics tomorrow..The tan light with the blue interior looks pretty good..As it turns out, I was not properly grounding the light, thus my blown fuses..It works great now, the difference in lighting is unbelievable.

irwin
12-07-2003, 07:10 AM
the late model mustangs have the same light correct???????????? :shrug :iiss

Bobby
12-07-2003, 10:14 AM
Looks like its time to do yet another mod to the bronco. The light came out really nice. I can't wait to start on mine. :chili: :chili: :chili: :chili:

Steve83
12-11-2003, 01:06 AM
Geez - $28 ?!?!?!?!

I have a few of those in my junkpile and I only want $10 for a black one.

http://www.superford.org/getfile.php?id=71709&toggle=fullsize&f=InteriorLamps.jpg

Blaze
12-11-2003, 03:38 AM
the late model mustangs have the same light correct???????????? :shrug :iiss
Yes, but steve has some good junk as stated above if ya wanna forgo the search. :shrug

Dustin
12-11-2003, 10:32 AM
yup you have to buy the housing then the lense. my cost was under 28 I think, but at least I got the color I wanted.

Blaze
12-12-2003, 06:23 AM
What all colors do they come in from Ford? I've only seen black, gray and maybe tan?? :shrug

jermil01
12-12-2003, 09:34 AM
I used the tan one, it looks fine with my blue interior.

plug ugly
01-13-2005, 11:32 PM
finally got around to doing this mod, and its worth the 20 bucks or so i paid on fleabay. The only thing is, I had to reuse the stock bronco bolts as the were longer than the 250 ones, and the spots have to go forward for proper operation of the lights. i guess you could change location of the power wires in the roof. The green is always hot, and the black is door open hot. No actually, that wouldnt work cause then the dome light would always be on. i dont know, maybe someone smarter than me can figure it out that feels like tearing the light apart or something.

Anwyas, lots more lighting, now if I could only figure out why the one front spot light wont come on (and no, its not the bulb)

brokebronco
01-15-2005, 12:17 PM
I installed the same lights into my 84 Bronco, 86 F250 and my buddy's 88 Bronco.

Crazed, you should already have the wiring in place. The problem usually is corroded connectorsby the seatbelt retractor on the drivers side.

These lights are great in a Bronco, the only problem in the pickup is the slope of the roof. It makes the map lights shine on the hood. No biggy, the dome light works nicely for reading maps.

Chris

Sixlitre
01-15-2005, 12:55 PM
The problem usually is corroded connectorsby the seatbelt retractor on the drivers side.

Chris

It can also be under the driver's kick panel where the 4 wire plug connects the dome harness to the main harness;

http://www.superford.org/getfile/161386/fullsize/IMG_0200.JPG (http://www.superford.org/registry/vehicles/showmedia.php?id=161386&original=1)

When that lime green one rots off you have no map lights or non-ignition cargo light. If the black w/blue tracer (above it) goes then you have no dome.

These fixed connectors in the ceiling can crack too causing no connection;

http://www.superford.org/getfile/158698/fullsize/IMG_0056.JPG (http://www.superford.org/registry/vehicles/showmedia.php?id=158698&original=1)

But when everything's working and that newer dome light goes in it's a whole lot brighter in there alright
Sixlitre

CLM
01-25-2005, 11:10 AM
Has anyone tried this on a 78-79. I would love to have more light inside.

Bronco Rob
01-26-2005, 02:40 AM
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&catInvalid Item
This listing (2413121998) has been removed by eBay. Make sure that you've entered the item number correctly.
Please consider this listing and transaction as cancelled. If anybody contacts you to complete the sale, please ignore the request. Completing the sale outside of eBay may be unsafe and will not be covered by eBay purchase protection programs.
egory=33701&item=2413121998

plug ugly
01-26-2005, 12:59 PM
probably, that is a very old link, like a year plus

Dustin
01-26-2005, 02:30 PM
fixed all the dead link to my pics

Blaze
01-26-2005, 03:26 PM
This listing has been removed by eBay. Make sure that you've entered the item number correctly.
You followed an old link...here's his current ones (two):
Gray (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7950223775&category=33712)
Tan (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7950458916&category=33712)

For anyone who stumbles on to this post later and the links are dead again, here's the link to the guys items..: dicksautoparts (http://search.ebay.com/_W0QQfgtpZ1QQfrppZ25QQfsooZ1QQfsopZ1QQsassZdicksau toparts)


:beer

Bronco Rob
02-03-2005, 01:16 AM
Just in case you guys care:

Before:

http://www.supermotors.org/getfile/174437/fullsize/S4300009.JPG

After:

http://www.supermotors.org/getfile/174438/fullsize/S4300010.JPG

It blends more than it looks. The Flash made it look brighter.

If anyone wants the original, let me know.

rywegh
02-03-2005, 04:59 PM
guess what! I ordered the light and got it. GO out to my truck and look up.....IT WAS all ready replaced by the previous owner. I might put it in the back but I thought I would see if anyone wants it first.

Bronco Rob
02-04-2005, 04:31 AM
No, let me know if it works in the back though, i was thinking about doing that!