Well, the Bronco still isn't running despite fixing the electrical problem. Now it looks like my MSD is shot, so I am going back to a stock Ford ignition to get it running. I need a bit of help with the wiring though, since the Haynes manual is no help here. I still have the stock parts to wire it up right, my only problem is with the coil wiring. There is the one wire in the harness that goes to the distributor that goes to the coil. This wire comes straight from the ignition mudule. I beleive this goes to the positive post on the coil. Can anyone confirm this? I can follow the negative wire from the coil back into the stock style harness so I beleive this will just stay as it is. Hopefully someone can correct me if I'm wrong before I try to find one in a junkyard tomorrow I can chase the wires on. Thanks.
Eric Tobolski

Ignition mod. wire (green/white) should go to the neg. side of the coil. Ignition wire (red) pos. side of coil.

Thanks. Just the info I needed.
Eric Tobolski