my axle never ended up an inch forward :shrug must have screwed up somewhere. oh well must go wack more fender

http://www.superford.org/registry/vehicles/users/2105/1309/fendercut2.JPG

on the ttb the coils are centered on the axle.. on the SA the coils are located an inch forward.. when you think you are moving it forward you are actually locating the "axle" in the stock position.. or a bit less..

yeah, it is fairly limited. I was able to push mine forward a bit more with the radius arms, but then the coils look a little "bent" so to speak.

Mine sits a little towards the rear also. It might be closer than everybody elses, does your shocks rub your coil towers in the back?

not at all

I bet mine is even further back than yours then. It's about up for a major redo anyway. The frame is pretty weak in back, I'm thinking about swaping the frame on it. I'll redo my mistakes and things I don't like at that time.

yeah we moved the buckets forward but I dont think we did it enough....that god damn hole is right in the way. I dont think its going to hurt anything just have to take a little more fender off in the rear.

If I redo my frame I think I'm going to use the 79 buckets and make a custom shock hoop. I also need to redo my drop brackets, they drop too far down.

yeah I had to cut the driver side coil bucket and do some custom $hit in order to actually move the axle forward. Did anyone else have to do this?