Here are Your Nominees For December:

1. bnkrtstk ( :thumbup )
2. crawler ( :thumbup )
3. OX1 ( :thumbup )
4. Bronkzilla ( :thumbup )
5. Gub_Ni ( :thumbup )
6. trey aka superbronco ( :thumbup )
7. dogonmut ( :thumbup )
8. 4XPepe` ( :thumbup )
9. Ogeechee4X4 ( :thumbup )

Allcruisen :imp :usa

1st to pimp!


Ok I'm going to give a story with each one of my pics. I don't have a bunch of pics, but I can do a write up about each. This pic is my avatar and one of my favorites. A friend took this one at a place here in Johnson City TN called Cash Hollow. It's an abandoned city dump. This is a poser shot as I just stopped for a moment for him to take a pic. This was my first time out with a locker in the rear. At the time I had a Dana 44 front that was converted to 8 lug and a Dana 60 rear running 4.56 gears. Going into the trail was so easy with the locker. My Bronco had very little flex so easy stuff for others was always a little challenging for me. When I traded for it the Bronco was already on 44's. Anyway, we played around for a little while and decided to go back out. That's when it got interesting. I got stuck and broke a Dana 60 shaft. Fortunatly since it's a full floater and I had a locker in the rear I was still going, but with no flex it took all night to get out. I now have a Dana 70 rear and Dana 60 front both locked. My theory is any time I break something then it needs to be upgraded.

http://mywebpages.comcast.net/gubni/extremebronco/inside/pics/cash/cashair.jpg

Vote for me!

:lolup :lolup :lolup :lolup :lolup :lolup :lolup :lolup :histerica

Allcruisen :imp :usa

I voted for OX :thumbup

choice was easy this month for me, gotta stick with dogonmut. that guy needs something for going to moab and completly destroying his front end.

If you vote for BRONKZILLA all your wildest dreams will come true!! :histerica

http://www.bronkzilla.com/images/misc/zillasite1.gif

http://www.bronkzilla.com/images/misc/zillasite3.gif

http://www.bronkzilla.com/images/misc/zillasite2.gif


im off to work.. more pimping to come.. :drinkbud

Zilla. Hes got his stuff moving now and hes helped me a few times. Not to mention he has one badass truck :thumbup

If you vote for BRONKZILLA all your wildest dreams will come true!!

Ok,......So When do my Dreams start comming true.

Is there a waiting perioud?

If you vote for BRONKZILLA all your wildest dreams will come true!!

Know what I'm dreaming??????? :shocked Now make it come true! :rockon

even though he ain't pimped yet, i gotta vote for my boy ogeechee. he probably won't win, but we can hope right?? get to pimpin jon!

( oh yea and we have plans for a trail truck that will blow your minds)

Ok,......So When do my Dreams start comming true.

Is there a waiting perioud?

Actually I was dreaming that Gack would tell us the damn yam story. Oh and that I would get your bronco, zilla :toothless

I'm waiting.............................

I'm waiting on some pimping...get to pimpin' folks!

hmm.... i really don't have any recent pics to pimp...y'all have seen them all already. I'll try to take some after work.

Yeah, Jimmy it's too bad that i can't pimp that other truck..or at least what we're gonna do to it :duh

hmm.... i really don't have any recent pics to pimp...y'all have seen them all already. I'll try to take some after work.


Just gives you another reason to go wheelin'...to get new pics! :rockon

I think there are some awesome looking FAWKIN Bronc's!! I can't vote yet till I see some pimpin of the Superbronco. Let's go make it easier for us to vote nominees.

I voted for OX :thumbup



:stupid
It would be nice to have someone from the NorthEast chapter win for a change :toothless .....besides, how many 78/79's do you see with custom fabbed Unimog axles :thumbup

a little pimpin help for my man ox

look at this thing, it's sick i tell you. you know what it's like looking at that thing crawling up behind you filling your rearview mirror? :shocked it's like get outta the way, big daddy is coming thru!!

http://img.photobucket.com/albums/v99/jackhart/ox1/ox5.jpg

http://img.photobucket.com/albums/v99/jackhart/ox1/ox3.jpg

http://img.photobucket.com/albums/v99/jackhart/ox1/ox4.jpg

for comparison's sake, this is me on the same rock above that he just walks over like a joke

http://img.photobucket.com/albums/v99/jackhart/paragon%20october04/paragon9.jpg

back to more ox shots

http://img.photobucket.com/albums/v99/jackhart/ox1/ox2.jpg

http://img.photobucket.com/albums/v99/jackhart/ox1/ox6.jpg

http://img.photobucket.com/albums/v99/jackhart/ox1/ox7.jpg

http://img.photobucket.com/albums/v99/jackhart/ox1/ox8.jpg

while i'm at it, i'll throw bnkrtstk a freebie too, but not of his bko...

http://img.photobucket.com/albums/v99/jackhart/ox1/ox9.jpg

sorry steve, couldn't resist :thumbup

I know I should vote for the person I nominated but I still think there needs to be some pimpin to get it.
I want to see that Bronco in action.

I cant resist posting this pic of scott. sorry bro :brownbag


fyi thats scott laying there scratching his head thinking how F'ed he is :toothless
http://www.superford.org/getfile/149849/fullsize/Moab%2004%20(HellsRevenge)%20008.jpg

Voted for OX1. Cool guy, and his Bronc is sick, sitting on mogs.

DO NOT VOTE FOR 4xPEPE`!!!
There are rigs far worthier than mine this month... so do everyone a favor and vote for somebody, anybody else! :brownbag

I had to give it to Raf. That's one bitchin Bronco he's got. Can't wait to see it in action at Truckhaven in a couple weeks. He'll have LOTS more pimpin pics after that.

DO NOT VOTE FOR 4xPEPE`!!!
There are rigs far worthier than mine this month... so do everyone a favor and vote for somebody, anybody else! :brownbag
Is this a new stratagy :shrug Come on you have a nice rig man :thumbup
Now stop it and start pimpin :twak

If you vote for BRONKZILLA all your wildest dreams will come true!! :histerica

My dream is to trade my bronco for yours. Now lets see it come true!! :chili: :rockon :thumbup

Nice rig Raf oneday hopefully mine will be like yours.

-Dennis

Is this a new stratagy :shrug Come on you have a nice rig man :thumbup
Thanks for the kind words, but my rig isn't trail ready... hell, it's barely poser ready. Right now it's the ONLY family rig we have and the rear end needs attention ASAP. I've got some 4.10's on the way... but until I can afford to have the rear rebuilt, I've got to take it easy and not trash it. On top of that... I need to get another 4 inches of lift under her, so I can stop rippin' up the 35's I paid so much to put under it. That means no serious wheelin' for the StoneBronco for awhile. I'm in a real crunch right now and whorin' out my ride against the likes of...
OX1
Bronkzilla
Gub_Ni
trey aka superbronco
dogonmut
... just isn't going to happen. I'll be givin my vote to one of these worthy rigs (no offense to those not listed, but those are the top rigs this month IMHO) and I think everyone else should too.
As much as I'd love to win this thing... I don't have anything new to offer, that I haven't already competed with and I just don't feel that my Bronco is worthy of a writeup in a national rag at this point and time. :shrug

Pepe, your an honorable man (and fellow motorcyclist) and I will only vote for another because I totally understand. :rockon

Besides, Bronkzilla's gonna make my dreams come true. :chili: :clap :kiss

Pepe, your an honorable man (and fellow motorcyclist) and I will only vote for another because I totally understand. :rockon
:stupid

OK here we go. This what my bronco looked lik the night I got it. I was 14!
http://www.supermotors.org/getfile/143773/fullsize/Scan10001.JPG
http://www.supermotors.org/getfile/143774/fullsize/Scan10003.JPG
http://www.supermotors.org/getfile/143775/fullsize/Scan10005.JPG
http://www.supermotors.org/getfile/143776/fullsize/Scan1.JPG
In the daytime after some work
http://www.supermotors.org/getfile/143777/fullsize/Scan10002.JPG
http://www.supermotors.org/getfile/143778/fullsize/Scan10004.JPG
Lots more pimpin to come

mine goes to.............(drum role)................



















dogonmut. who'd you think i was going to vote for??

Ok here are some more pictures of when I started working on it.
Had to clean it all up.
http://www.supermotors.org/getfile/143884/fullsize/Scan10007.JPG
http://www.supermotors.org/getfile/143885/fullsize/Scan10008.JPG
Dash came out for a better dash :toothless
http://www.supermotors.org/getfile/143886/fullsize/Scan10010.JPG
Everything was covered in power steering fluid because the box was bad. Cleaned the axle.
http://www.supermotors.org/getfile/143888/fullsize/Scan10011.JPG
Didn't have door panels. I compromised later :toothless
http://www.supermotors.org/getfile/143889/fullsize/Scan10012.JPG
What a mess
http://www.supermotors.org/getfile/143892/fullsize/Scan10014.JPG
http://www.supermotors.org/getfile/143895/fullsize/Scan10017.JPG
After cleaning and sanding it's ready for paint
http://www.supermotors.org/getfile/143894/fullsize/Scan10016.JPG
http://www.supermotors.org/getfile/143893/fullsize/Scan10015.JPG
After primer and paint it looks much better
http://www.supermotors.org/getfile/143890/fullsize/Scan10013.JPG

Playing "Hump The Steps" with Chris85xlt....

http://www.bronkzilla.com/images/hungry%20valley%209-25-04/PICT0686.JPG

http://www.bronkzilla.com/images/hungry%20valley%209-25-04/PICT0687.JPG


side shots.. new lower stance...

http://www.bronkzilla.com/images/hungry%20valley%209-25-04/PICT0692.JPG

http://www.bronkzilla.com/images/hungry%20valley%209-25-04/PICT0693.JPG

scared all the H2's away... :cry they didnt wanna play

http://www.bronkzilla.com/images/hungry%20valley%209-25-04/PICT0696.JPG

more to come.. :drinkbud

Ok,......So When do my Dreams start comming true.

Is there a waiting perioud?
First come first serve!!! :histerica

Know what I'm dreaming??????? :shocked Now make it come true! :rockon

Uh.... I know i said "ALL" but i draw the line at posing spread eagle on the hood of my bronco... Thats just sick FordFilly :wacko

Actually I was dreaming that Gack would tell us the damn yam story. Oh and that I would get your bronco, zilla :toothless
I'm waiting.............................

someday.... someday.................... remember that no time frame was given... the smallprint is so small that its invisible to the human eye.

I had to give it to Raf. That's one bitchin Bronco he's got. Can't wait to see it in action at Truckhaven in a couple weeks. He'll have LOTS more pimpin pics after that.
thanks.. yeah ill actually use the camera this time.. i took like 4 pictures when i went to hollister... this was one.... filling up both trucks at the same time

http://www.bronkzilla.com/images/hollister%2010-9-04/Hollister00b.jpg

My dream is to trade my bronco for yours. Now lets see it come true!! :chili: :rockon :thumbup
-Dennis

theres another person in line in front of you... :doh:




Thanks to those who have voted for me so far.. I have a ton of buildup pics to pimp and will be getting new offroading pics with peteyg in a few weeks.. hopefully ill still be in the running.. :rockon

a couple more from the trip posted above so i can close this folder... :thumbup

My power steering blew up earlier in the day so it was a pain to steer.. My front ARB fitting snapped off when the diff hit the track bar while going over the steps.. ooh almost forgot.. heres a video of that... (i forgot take off my parking brake after i got to the top :cry )
20mb
http://www.bronkzilla.com/images/hungry%20valley%209-25-04/zilllllla.mpg

here are the pics i mentioned earlier
trying to get out of a hole
http://www.bronkzilla.com/images/hungry%20valley%209-25-04/PICT0707.JPG

nothing...
http://www.bronkzilla.com/images/hungry%20valley%209-25-04/PICT0708.JPG

still nothing....
http://www.bronkzilla.com/images/hungry%20valley%209-25-04/PICT0710.JPG

since the front wasnt doing anything i figured id back up a bit and hit the gas.. damn i missed that front arb and power steering..
http://www.bronkzilla.com/images/hungry%20valley%209-25-04/PICT0711.JPG

nope.. didnt do much.. just bounced to the side and got this bump
http://www.bronkzilla.com/images/hungry%20valley%209-25-04/PICT0719.JPG

that was the first Test Run after the almost 2 year rebuild... ill be posting pics of the rebuild process soon.. :rockon

Hey, now guys, show some love to the Black Bear!


This was an insane hill climb, but the secret is not to let off the gas. Keep it more than half throttle so you don't stall and keep it as steady as possible and up she goes!
http://mywebpages.comcast.net/gubni/extremebronco/inside/pics/cash/badhill.jpeg


Anyone like to play in the mud? I got a call to help out a friend in a stuck jeep and decided to show him how it was done. I ask it this was where he got stuck and floored it and did some donuts.
http://mywebpages.comcast.net/gubni/extremebronco/inside/pics/cash/P1010244.JPG

i lightened up your avatar pic.. hope you dont mind... :thumbup

More pimpin. Along the way of buildup. After cage, bumpers, front lift spacer I made, and dash
http://broncozone.com/forums/uploads/post-2-1089232850.jpg
http://broncozone.com/forums/uploads/post-2-1089233081.jpg
http://broncozone.com/forums/uploads/post-2-1089233268.jpg
The more exciting detailed pictures.


-Here's the dash completed. I just love it. The finish was done with a vibrater sander with 216 grit sand paper. My dad and I step rolled the edge of the aluminum to give it a embossed look.
http://broncozone.com/forums/uploads/post-2-1089233688.jpg
Another picture of the dash from the passenger side.
http://broncozone.com/forums/uploads/post-2-1089233803.jpg
A picture from my future back seat shows the dash again and also shows the B&M Z-Gate shifter that I got for Christmas, and the suspension bucket seats that I also got for Christmas.
http://broncozone.com/forums/uploads/post-2-1089234017.jpg
Another picture from the driver side with the door open.
http://broncozone.com/forums/uploads/post-2-1089234419.jpg
Now for some rollcage shots.
http://broncozone.com/forums/uploads/post-2-1089234907.jpg
another. See how many tubes are consisted of in this rollcage. When the cae is finished it will be a 12 point cage tied into the frame.
http://broncozone.com/forums/uploads/post-2-1089235159.jpg
Underhood rollcage pictures which also shows my travel shock hoops which will have 4 15" travel Explorer Procomp ES9000 shocks.
http://broncozone.com/forums/uploads/post-2-1089235487.jpg
The fender opening. I had to take out the plastic liners and cut the metal fenderwell to allow enough space for the long travel shocks.
http://broncozone.com/forums/uploads/post-2-1089235725.jpg
Rollcage goes right through the firewall.
http://broncozone.com/forums/uploads/post-2-1089235915.jpg
And for a recent picture
http://www.supermotors.org/getfile/141437/fullsize/Picture%20179.jpg

hey, are you even 16 yet? you might very well own the trail with this rig. keep pimpin like this, and I might just have to vote for you!

Big Pimpin'

Before the break
http://www.superford.org/getfile/150324/fullsize/IMG_1200.JPG

After the break
http://www.superford.org/getfile/152537/fullsize/scott_broke.jpg

Cool pic.

http://www.bronkzilla.com/images/hollister%2010-9-04/Hollister00b.jpg

You got my vote Turdzilla.

You got my vote Turdzilla.
Same here. Thats an awesome rig

You got my vote Turdzilla.


wow... :o thanks dognutz... :rockon

crawler :rockon

Some pictures from the Hollister Hills trip with the WT 4 Wheeling club... http://www.wt4x4.com

Driving over SmashMan!!!
Video--> (1.4mb) http://www.bronkzilla.com/images/hollister%2010-9-04/smashmanhollister.wmv

http://www.bronkzilla.com/images/hollister%2010-9-04/Hollister00h.jpg

http://www.bronkzilla.com/images/hollister%2010-9-04/Hollister01.jpg

Playing in the Frame Twister used in TTC.. It was dry at the time.. :cry

http://www.bronkzilla.com/images/hollister%2010-9-04/Hollister02.jpg

http://www.bronkzilla.com/images/hollister%2010-9-04/Hollister04.jpg

Going through the Mini Rubicon which is also used in TTC.. PlugUgly spotted me through the whole thing..

short vid of me on the rocks.. about 4mb
http://www.bronkzilla.com/images/hollister%2010-9-04/rafrocks.wmv

http://www.wt4wheeling.com/dblue351/pics/hhgt04/images/HHGT%20066.jpg

http://www.wt4wheeling.com/dblue351/pics/hhgt04/images/HHGT%20063.jpg

http://www.wt4wheeling.com/dblue351/pics/hhgt04/images/HHGT%20062.jpg

http://www.wt4wheeling.com/dblue351/pics/hhgt04/images/HHGT%20065.jpg

uh.. i was confused about the whole "rock crawling" thing.. i thought they said "rock cracking"

http://www.wt4wheeling.com/dblue351/pics/hhgt04/images/HHGT%20067.jpg

http://www.bronkzilla.com/images/hollister%2010-9-04/Hollister13smaller.jpg
higher res of the above--> http://www.bronkzilla.com/images/hollister%2010-9-04/Hollister13.jpg

http://www.bronkzilla.com/images/hollister%2010-9-04/Hollister14smaller.jpg
higher res of the above--> http://www.bronkzilla.com/images/hollister%2010-9-04/Hollister14.jpg

some ramp shots..

http://www.wt4wheeling.com/dblue351/pics/hhgt04/images/HHGT%20084.jpg

welndmn playing with my coils..

http://www.wt4wheeling.com/dblue351/pics/hhgt04/images/HHGT%20085.jpg

going forward too..

http://www.bronkzilla.com/images/hollister%2010-9-04/Hollister05.jpg

http://www.bronkzilla.com/images/hollister%2010-9-04/Hollister06.jpg

couldnt close the door.. :histerica

http://www.bronkzilla.com/images/hollister%2010-9-04/Hollister08.jpg

a couple of higher res ramp pics..
http://www.bronkzilla.com/images/hollister%2010-9-04/Hollister09.jpg
http://www.bronkzilla.com/images/hollister%2010-9-04/Hollister10.jpg
http://www.bronkzilla.com/images/hollister%2010-9-04/Hollister11.jpg
http://www.bronkzilla.com/images/hollister%2010-9-04/Hollister12.jpg

Movies

Save them, then play them.

Upper water fall on Raw Deal in Table Mesa AZ
http://www.superford.org/getfile/99962//Water%20Fall%20at%20Raw%20Deal.avi

Single shot of me on Moab rim
http://www.superford.org/getfile/150075//MVI_3105.AVI

Moab montage video
http://www.superford.org/getfile/154903//The%20Gathering%202004.wmv

Montage of 2 seasons ago
http://www.superford.org/getfile/104106//Bronco_small.wmv

http://www.superford.org/getfile/140333/fullsize/Raw%20Deal(8-14-04)%20004.jpg
http://www.superford.org/getfile/140334/fullsize/Raw%20Deal(8-14-04)%20003.jpg
http://www.superford.org/getfile/140335/fullsize/Raw%20Deal(8-14-04)%20015.jpg
http://www.superford.org/getfile/140336/fullsize/Raw%20Deal(8-14-04)%20024.jpg
http://www.superford.org/getfile/140337/fullsize/Raw%20Deal(8-14-04)%20026.jpg
http://www.superford.org/getfile/140338/fullsize/Raw%20Deal(8-14-04)%20004.jpg
http://www.superford.org/getfile/140351/fullsize/Raw%20Deal(8-14-04)%20045.jpg

Thanks for the votes everybody!!!

dig the movie with all the old footage in it :thumbup

Hey Raf, you know you got my vote!

http://www.supermotors.org/getfile.php?id=88959&toggle=fullsize&f=.jpg
http://www.supermotors.org/getfile.php?id=88951&toggle=fullsize&f=.jpg
http://www.supermotors.org/getfile.php?id=88945&toggle=fullsize&f=.jpg
http://www.supermotors.org/getfile.php?id=88944&toggle=fullsize&f=.jpg
http://www.supermotors.org/getfile.php?id=88942&toggle=fullsize&f=.jpg
http://www.supermotors.org/getfile.php?id=81781&toggle=fullsize&f=.jpg http://www.supermotors.org/getfile.php?id=81793&toggle=fullsize&f=.jpg http://www.supermotors.org/getfile.php?id=81792&toggle=fullsize&f=.jpg http://www.supermotors.org/getfile.php?id=81784&toggle=fullsize&f=.jpg

diggin' the icebreaker shot

diggin' the icebreaker shot

Thanks. C'mon up and it could be you.

heres one that i have of Ogeechee i have
http://www.supermotors.org/getfile/137251/fullsize/IMG_0962.JPG

For the people who don't know who I am or haven't seen what I've done check out my project 78 bronco (http://fullsizebronco.com/forum/showthread.php?t=22366)

There are a lot of pictures there

nice Crawler, very impressive :thumbup

i like how he called them basic modifications. basic my ass!

Heres my vote good luck scott
http://www.supermotors.org/getfile/127306/fullsize/phoenix%20m&g%20117.jpg
http://www.supermotors.org/getfile/127314/fullsize/phoenix%20m&g%20119.jpg
http://www.supermotors.org/getfile/127394/fullsize/phoenix%20m&g%20121.jpg
This here is one badass rig.

the some great pics this month..
I was sure I would vote for bronkzilla but wow the comp is kinda tuff

Dogohmut looks really good & so does the kid.
pretty amazing what a kid that dont even have his drivers lic. yet has done to his rig. :shocked

bring on the pics! :clap

some random Hollister pics before the current buildup

hollister november 2002

http://www.wt4wheeling.com/MBB/54298840pBLZKx_ph.jpg

coming out of the mini rubicon with a broken hub.. i almost rolled it over.. DBlue351 was helping me out earlier and that tow strap was still attached.. he spotted me going over and he hit the gas... that kept me from putting it on its side...

http://www.bronkzilla.com/images/fotmwhoringpics/tippy.jpg

the sun was in my eyes!!! i swear...... :histerica

http://www.wt4wheeling.com/MBB/54299275KXjuIE_ph.jpg

http://www.wt4wheeling.com/MBB/54299285nYCCYN_ph.jpg

for those into mud...

http://www.wt4wheeling.com/MBB/54376561KCPWRg_ph.jpg

http://www.wt4wheeling.com/MBB/Dsc00052.jpg

running the frame twister in reverse...

http://www.bronkzilla.com/images/fotmwhoringpics/fh6.jpg

Hollister Hills November 2001

look at that flex...

http://www.wt4wheeling.com/images/Hollister/11.03.01/flextrailrafael.jpg

http://www.bronkzilla.com/images/fotmwhoringpics/hollisterttb.JPG

chevyboat in awe at how flexy my bronco is...

http://www.bronkzilla.com/images/fotmwhoringpics/hollisterttb2.JPG

Hollister mid 2000

http://www.bronkzilla.com/images/fotmwhoringpics/fh1.jpg

plug ugly was standing about 3/4 of the way to the top of this climb to guide us around the hole in the middle.. i was nervous and didnt really pay attention to his instructions (it was like my 3rd time offroad)

http://www.bronkzilla.com/images/fotmwhoringpics/fh2.jpg

:doh: learned my lesson...

http://www.bronkzilla.com/images/fotmwhoringpics/fh3.jpg

plug ugly, chevyboat, and chris (ponyboy back on mbb and wt) were nice enough to bend the tie rod back enough to where i was able to make the 7 hour drive home..

http://www.bronkzilla.com/images/fotmwhoringpics/fh4.jpg

had other old pictures but a virus on my computer wiped them out..
ill be pimping out the truck mods soon.. full roll cage, raised gas tank, lower exo, coilover sas setup, etc.. etc....
:rockon

Few pics I have of Bnkrstk
Feb 04
http://www.supermotors.org/getfile/107707/fullsize/Picture%20013.jpg
getting pulled out by reptilikus
http://www.supermotors.org/getfile/107721/fullsize/Picture%20019.jpg

Couple more from Jun 04
http://www.supermotors.org/getfile/128558/fullsize/girls%20055.jpg
http://www.supermotors.org/getfile/128577/fullsize/girls%20066.jpg

What color are those tail lights? :goodfinge

What color are those tail lights? :goodfinge

they were pink :histerica i put the red ones back on..



http://www.bronkzilla.com/images/misc/zillagay.gif

Raising the Gas Tank!!!! :rockon

the truck was down for a while so the mods began.......

as you all know the bronco gas tank is huge and it hangs down way below the frame.. it smacks on everything in sight...

first step.. remove the tank and cut a hole in the floor.. (not for the faint of heart)

http://www.bronkzilla.com/images/fotmwhoringpics/gt1.JPG

me standing in the hole.. check out the size of that tank..

http://www.bronkzilla.com/images/fotmwhoringpics/gt2.JPG

new flat skidplate.. its flush with the frame... you can see how much it went up by looking at the exhaust.. before the raising of the tank the exhaust was higher than the tank.. (its been moved up since then)



http://www.bronkzilla.com/images/fotmwhoringpics/gt3.JPG

started building the new raise floor section.. made an access hole for the fuel hose and to get to the fuel pump..

http://www.bronkzilla.com/images/fotmwhoringpics/gt4.JPG

fuel pump hole.. no more dropping the tank !!!!!!!!! :rockon :rockon

http://www.bronkzilla.com/images/fotmwhoringpics/gt6.JPG

made bolt on covers for both

http://www.bronkzilla.com/images/fotmwhoringpics/gt5.JPG

7+ inch hole saw... this probably would have hurt me more but as you can see in the pic my fenders had been hacked before that.. that hurt... ill post pics of that later too..

http://www.bronkzilla.com/images/fotmwhoringpics/gt7.JPG

bling bling recessed fuel filler using the stock stuff.

http://www.bronkzilla.com/images/fotmwhoringpics/gt8.JPG

fuel safe hose and some paint finished it off.. i have since removed the paint from the hose since i was told it needed to breathe...

http://www.bronkzilla.com/images/fotmwhoringpics/gt9.JPG

i posted this picture before but you can see the clearance gained in this pic.

http://www.wt4wheeling.com/dblue351/pics/hhgt04/images/HHGT%20067.jpg

:rockon :rockon :rockon :rockon thanks for the votes so far!!!!

You really have done such a great job on bronczilla in just what 4 yrs?
Like I always said your Bronco is what my Bronco wishes it could be one day! :rockon

I think it would make a great cover truck for the "BroncoDriver" mag
I have'nt casted my vote yet...
but........

Dayum Raf! It's unsportsman-like to run up the score! I'm going to try to pimp some pics that i've never posted on my site, Will try to get some action shots this weekend.
http://fullsizebronco.net/fsbimagehost/show.php/722/mvc-128e.jpg
http://fullsizebronco.net/fsbimagehost/show.php/723/mvc-052e.jpg
http://fullsizebronco.net/fsbimagehost/show.php/724/mvc-173e.jpg
http://fullsizebronco.net/fsbimagehost/show.php/725/mvc-174e.jpg
http://fullsizebronco.net/fsbimagehost/show.php/726/mvc-176e.jpg
:rebelflag

Nice! superbronco!

Thanks to all those who voted for me. More pimpin to come

More pimpin as promised.

Door off to make tube doors.
http://www.supermotors.org/getfile/144576/fullsize/Picture%20257.jpg
Basic design getting there
http://www.supermotors.org/getfile/144787/fullsize/Picture%20260.jpg
Welded to a front plate, bolted to the hinges
http://www.supermotors.org/getfile/144789/fullsize/Picture%20263.jpg
http://www.supermotors.org/getfile/144790/fullsize/Picture%20264.jpg
http://www.supermotors.org/getfile/144791/fullsize/Picture%20265.jpg
Added 16ga. sheetmetal to the front to cover the hinges and match up with the body style
http://www.supermotors.org/getfile/144961/fullsize/Picture%20279.jpg
http://www.supermotors.org/getfile/144962/fullsize/Picture%20277.jpg
http://www.supermotors.org/getfile/144963/fullsize/Picture%20278.jpg
Matches up with the body perfect
http://www.supermotors.org/getfile/144964/fullsize/Picture%20280.jpg
Added braces and finished the latch
http://www.supermotors.org/getfile/148988/fullsize/Picture%20333.jpg
http://www.supermotors.org/getfile/148989/fullsize/Picture%20334.jpg
http://www.supermotors.org/getfile/148990/fullsize/Picture%20335.jpg
http://www.supermotors.org/getfile/148991/fullsize/Picture%20336.jpg
Latch in the basic stages
http://www.supermotors.org/getfile/148992/fullsize/Picture%20337.jpg
http://www.supermotors.org/getfile/148993/fullsize/Picture%20338.jpg
http://www.supermotors.org/getfile/148994/fullsize/Picture%20339.jpg
http://www.supermotors.org/getfile/148995/fullsize/Picture%20341.jpg
http://www.supermotors.org/getfile/148996/fullsize/Picture%20340.jpg
Completely finished
http://www.supermotors.org/getfile/152584/fullsize/Picture%20369.jpg
http://www.supermotors.org/getfile/152585/fullsize/Picture%20370.jpg
http://www.supermotors.org/getfile/152586/fullsize/Picture%20372.jpg
http://www.supermotors.org/getfile/152587/fullsize/Picture%20373.jpg
http://www.supermotors.org/getfile/152588/fullsize/Picture%20374.jpg
More to come. VOTE FOR ME>

Keep the pics coming guys. :rockon

are you going to the DMV to take your driving test in that Bronco? :goodfinge
That would be cool I wonder what they would say..

have you ever wheeled it yet (without the license?)
I dont think you'd need that off road...

Nice work man...Like the doors! :clap


Hey TREY is that a extracab Bronco?
How cool cant wait to see more pics of that oddity. :thumbup

Hey TREY is that a extracab Bronco?
How cool cant wait to see more pics of that oddity. :thumbup

To my knowledge it is the only 78-79 supercab Bronco in existance. It's really sweet to watch people try to figure out what it is, I started building it in March 2001. Check out my website, SuperBronco Site (http://bandit99.clubfte.com/) for more pics. All the pics on the opening page link into additional pages. It's actually about 75% F250 (frame, running gear, and the front half of the cab) and the rear quarter section from a Bronco. :rebelflag

are you going to the DMV to take your driving test in that Bronco? :goodfinge
That would be cool I wonder what they would say..

have you ever wheeled it yet (without the license?)
I dont think you'd need that off road...

Nice work man...Like the doors! :clap


Hey TREY is that a extracab Bronco?
How cool cant wait to see more pics of that oddity. :thumbup


If I tried to take the test in my bronco I think the bronco would fail. I am going to wheel a litttle today to get pics. I have my permit so I can legally drive

To my knowledge it is the only 78-79 supercab Bronco in existance. It's really sweet to watch people try to figure out what it is, I started building it in March 2001. Check out my website, SuperBronco Site (http://bandit99.clubfte.com/) for more pics. All the pics on the opening page link into additional pages. It's actually about 75% F250 (frame, running gear, and the front half of the cab) and the rear quarter section from a Bronco. :rebelflag

What gave you this crazy idea anyway? :shrug

Its nice to be different.

This is where i kind of went crazy with the sawzall and there was really no turning back.... (bronco was higher in the pics than it is now)

First time cutting this much with a sawzall.. Beutiful job if i do say so myself.. :histerica

http://www.bronkzilla.com/images/fotmwhoringpics/zz1.jpg

no turning back now...

http://www.bronkzilla.com/images/fotmwhoringpics/zz2.jpg

front passenger.. a little better...

http://www.bronkzilla.com/images/fotmwhoringpics/zz3.jpg

rear passenger.. i couldnt seem to follow the line i drew in.. oh well.. grinders are also fun too...

http://www.bronkzilla.com/images/fotmwhoringpics/zz4.jpg

time for some tube!!!!!!

made some sliders to extend out so i could attach the lower exo..

http://www.bronkzilla.com/images/fotmwhoringpics/zzs1.JPG

arent they precious :wacko

http://www.bronkzilla.com/images/fotmwhoringpics/zzs2.JPG

testing them out... yeah, they work... :drinkbud

http://www.bronkzilla.com/images/fotmwhoringpics/zzs3.JPG

unfortunately my plans called for me to cover up my beutiful sawzall work with some bent tube.. :cry

http://www.bronkzilla.com/images/fotmwhoringpics/zz5.JPG

rear (bends in at the end to connect to the rear bumper..)

http://www.bronkzilla.com/images/fotmwhoringpics/zz6.JPG

painted and ready to be welded on..

http://www.bronkzilla.com/images/fotmwhoringpics/zz7.JPG

good shot of the finished work

http://www.bronkzilla.com/images/fotmwhoringpics/zz9.jpg

other side

http://www.bronkzilla.com/images/fotmwhoringpics/zz9b.jpg

ill post up the sas and cage stuff soon.. :rockon :rockon :rockon

thanks again everyone..

WOW, only a few days and we already have 57 VOTES.....Everyone is coming out with some serious KICK-BUTT Pics.....

All I can say is Keep it COMIN'. :chili: :chili: :clap :clap

Allcruisen :imp :usa

http://www.bronkzilla.com/images/fotmwhoringpics/zzs2.JPG

did the bushwackers rub the paint away?

the bushwackers came with a tube of black silicone type glue... the instructions said to put the fender flares on, trace the outide, remove the flare, sand the surface down on the fender, then put a bead of that glue on it.. i did it to the first one but since i was doing this by myself it became too much of a hassle so i didnt bother to do it with the others.. it did make a mess.. removed it with diesel and a rag..

Making armrests for my doorpanels
http://www.supermotors.org/getfile/155733/fullsize/Picture%20073.jpg
My dad had to tig weld them because I don't know how yet
http://www.supermotors.org/getfile/155734/fullsize/Picture%20074.jpg
http://www.supermotors.org/getfile/155735/fullsize/Picture%20075.jpg
Mounted
http://www.supermotors.org/getfile/155736/fullsize/Picture%20076.jpg
Polished with armrest I made
http://www.supermotors.org/getfile/155730/fullsize/Picture%20084.jpg
http://www.supermotors.org/getfile/155731/fullsize/Picture%20085.jpg
http://www.supermotors.org/getfile/155732/fullsize/Picture%20086.jpg

I think I'm going to save my vote a little while. This will be the first time I haven't voted after seein who all has been nominated. This is a good month for FOTM.

Good Luck to All,
Brian

-Here's the dash completed. I just love it. The finish was done with a vibrater sander with 216 grit sand paper. My dad and I step rolled the edge of the aluminum to give it a embossed look.
http://broncozone.com/forums/uploads/post-2-1089233688.jpg
Another picture of the dash from the passenger side.
http://broncozone.com/forums/uploads/post-2-1089233803.jpg
A picture from my future back seat shows the dash again and also shows the B&M Z-Gate shifter that I got for Christmas, and the suspension bucket seats that I also got for Christmas.
http://broncozone.com/forums/uploads/post-2-1089234017.jpg
Another picture from the driver side with the door open.
http://broncozone.com/forums/uploads/post-2-1089234419.jpg
[/IMG]

That aluminum work, especially the dash, is sweet!

[QUOTE=jackhart]a little pimpin help for my man ox

Thanks JH, some of those pics I hadn't even seen before.

A STORY: How the UNIBRONC came to be;

The 300$ beast on it's maiden wheelin voyage.

http://ox.users.superford.org/GREEN_DILYSI/Original/front.jpg

Towing a bronc with a bronc SUCKS!! :toothless

http://ox.users.superford.org/GREEN_DILYSI/Original/ontrailer.jpg

Extraction on the bumper never works. :cry

http://ox.users.superford.org/GREEN_DILYSI/Original/flat.jpg

Always wanted to do this. Problem is, after you squirt out 400 cubes of water from the motor, 8 gallons from the exh and crank it over forever, everything else is still wet. So when your radiator blows a hole in itself, but you don't know cause your guages are fogged over (and all your windows too). That leads to the tranny pissing out fluid on the pass exh manifold and a nice fire on the radius arm. Which of course you don't know about cause your butt is totally soaked and you can't feel the heat. :brownbag

http://ox.users.superford.org/GREEN_DILYSI/Original/JIMswamp.jpg

So a bunch of bronconuts from the original bronc mailing list decide to gather in Leadville Co. , back in 2000. I figure a rebuild is in order.
This is what it looked like then.

http://ox.users.superford.org/GREEN_DILYSI/greendone1.jpg
http://ox.users.superford.org/GREEN_DILYSI/greendone2.jpg

I had added some kinda neat (well, they seemed cool back then anyway) stuff about this time.

Min-tubs for the swamper clearance.

http://ox.users.superford.org/GREEN_DILYSI/minitubinside.jpg
http://ox.users.superford.org/GREEN_DILYSI/minituboutside.jpg

A hokey snorkel

http://ox.users.superford.org/GREEN_DILYSI/snorkle.jpg

Gas tank skid

http://ox.users.superford.org/GREEN_DILYSI/gastankskid.jpg

Onboard air

http://ox.users.superford.org/GREEN_DILYSI/onboardair.jpg

Gas can carrier (made from tire carrier)

http://ox.users.superford.org/GREEN_DILYSI/gascarr.jpg

60 front, 14 bolt rear with disks

http://ox.users.superford.org/GREEN_DILYSI/reardisk.jpg

So I buy a tow rig and head out to Co.

http://ox.users.superford.org/Colorado/DCP00155.JPG

More overheating

http://ox.users.superford.org/Colorado/DCP00195.JPG

And a disiasterous week of no wheeling and a blown tranny.

http://ox.users.superford.org/Colorado/DCP00230.JPG

It was about that time, that I was doing a lot of wheeling with a guy who owned a hummer dealer. Those things went through the mudholes like a tractor tire rig. I decided I wanted that kind fo clearance, but as I found out, military hummers are not parted and sold on the open market. I stumbled on a Unimog site and almost bought a whole mog. Found a reputable guy that sold just the axles.

http://ox.users.superford.org/UNIMOG/First%20look/DCP00761.JPG

After stuffing the front axle under the bronc, it became evident that I either needed to move the front diff or put in 14 inches of lift. I had a custom front housing and inners made. That took 9 months to get. I also decided after the fact I wanted the 8 lug/disk conversion. Getting those hub nuts off as fun.

http://ox.users.superford.org/UNIMOG/DISKBRAKES/DISK%20INSTALL/DCP01065.JPG

So on top of all that, I had a "nice" relationship with an Alki and managed to get my finger stuck in a driveshaft. :banghead

http://ox.users.superford.org/MISC/Finger/DCP01084.JPG

Finally, about 3.5 years of various "delays", I get these mog axles in.

http://ox.users.superford.org/UNIMOG/No%20swampers%20needed/DCP01473.JPG
http://ox.users.superford.org/UNIMOG/No%20swampers%20needed/DCP01474.JPG
http://ox.users.superford.org/UNIMOG/No%20swampers%20needed/DCP01477.JPG
http://ox.users.superford.org/UNIMOG/No%20swampers%20needed/Upper%20link_truss.JPG[/IMG [IMG]http://ox.users.superford.org/UNIMOG/No%20swampers%20needed/DCP01479.JPG http://ox.users.superford.org/UNIMOG/No%20swampers%20needed/DCP01481.JPG http://ox.users.superford.org/UNIMOG/No%20swampers%20needed/DCP01485.JPG

And boy do they work well. You barely need spotting and don't have to spend much time picking a line.
http://ox.users.superford.org/Paragon/17%20OCT%2004/DCP01512.JPG
http://ox.users.superford.org/Paragon/17%20OCT%2004/DCP01516.JPG
http://ox.users.superford.org/Paragon/17%20OCT%2004/DCP01518.JPG http://ox.users.superford.org/Paragon/17%20OCT%2004/DCP01519.JPG
http://ox.users.superford.org/Paragon/17%20OCT%2004/IMAG0350.JPG

So thats my story :thumbup :thumbup

I did'nt need to see :shocked that close up finger :uke:
Dude that was sick! I just ate! :goodfinge

"Blood ,sweat & gears " hu?

Yo Crawler I am really becoming impressed with work you guys have done!
SWEET! :clap

Yo Crawler I am really becoming impressed with work you guys have done!
SWEET! :clap

Thanks BlancoBronco.
Here is what I did for fun
http://www.supermotors.org/getfile/143865/fullsize/Picture%20225.jpg
http://www.supermotors.org/getfile/143866/fullsize/Picture%20226.jpg
http://www.supermotors.org/getfile/143867/fullsize/Picture%20227.jpg
Uploading more pics.

Stay tuned :thumbup

OX1 :thumbup :beer :shocked

Pictures from todays bodywork progress. I hate bodywork :banghead
http://www.supermotors.org/getfile/155867/fullsize/Picture%20496.jpg
http://www.supermotors.org/getfile/155868/fullsize/Picture%20497.jpg
http://www.supermotors.org/getfile/155869/fullsize/Picture%20498.jpg
http://www.supermotors.org/getfile/155870/fullsize/Picture%20499.jpg
More comin'

More pics... Rear shocks were too long so i went through the bed ...

Tube Shock mount also holds the resevoirs.

http://www.bronkzilla.com/images/fotmwhoringpics/fs1.JPG

welded in.. the cage (pictures will come later) attaches to it as well

http://www.bronkzilla.com/images/fotmwhoringpics/fs2.JPG

brackets welded to the top of the axle tubes.. out of the way of rocks.

http://www.bronkzilla.com/images/fotmwhoringpics/fs3.JPG

one problem with something like this is having water come in through the holes you just cut in the floor.. i went to the junkyard and pulled these shift boots from some old pick up trucks..

http://www.bronkzilla.com/images/fotmwhoringpics/fs4.JPG

i cut the top part off and slid them over the shocks.. pretty tight fit.. no water will come through the top..

http://www.bronkzilla.com/images/fotmwhoringpics/fs5.JPG

the bottom has a 2nd lip that holds pretty good.. i went ahead and siliconed it just in case..

http://www.bronkzilla.com/images/fotmwhoringpics/fs6.JPG

looking up

http://www.bronkzilla.com/images/fotmwhoringpics/fs7.JPG

Some rollcage pictures I took today
http://www.supermotors.org/getfile/155872/fullsize/Picture%20500.jpg
Where the rollcage mounts to the sliders that mount to the frame
http://www.supermotors.org/getfile/155873/fullsize/Picture%20501.jpg
Still need welding
http://www.supermotors.org/getfile/155874/fullsize/Picture%20502.jpg

The aluminum rear panels I made. After being cut but before being bead rolled and sanded.
(Sorry for the blurry picture)
http://www.supermotors.org/getfile/155875/fullsize/Picture%20009.jpg
After I sanded them and rolled the bead aroung the edge
http://www.supermotors.org/getfile/146253/fullsize/Picture%20021.jpg
http://www.supermotors.org/getfile/155877/fullsize/Picture%20024.jpg
Need to make brackets to install them still
Look good though :thumbup
http://www.supermotors.org/getfile/155878/fullsize/Picture%20025.jpg

I hate bodywork
I 2nd that!

dammm this really turned out to be a tough month,
but im going with crawler.

just an all around sweet bronco, and incredible tallent for someone of his age.

This month really shows it takes all kinds of Broncos to make this site what it is...from the mostly stock to radical. This site kicks ass. :thumbup :beer :rockon

This is a really tough month I agree!
I am going to give it a few days to vote.
Bronco on Mogs.........
Bronkzilla........
Scotts rig......
Crawlers rig......
etc......
I need to do some thinking, so get whoring those pics.

Turning the rear tire carrier into a Jerry Can holder.

Back in Hollister 2002 the spare tire landed hard on a rock and broke tore almost all the metal holding it on. we twisted the rest off and threw the tire in the back.

http://www.bronkzilla.com/images/fotmwhoringpics/tc1.jpeg

Something about lifting a 40" tire in the air didnt seem fun so i decided to turn it into a jerry can holder.. 1 gas 1 water... i used the existing tire carrier steel for most of the build. just cut it up and welded it together..

http://www.bronkzilla.com/images/fotmwhoringpics/tc2.jpeg

bought some 1/4" thick angle iron to creat the base.. it will take any hits from rocks so the cans dont explode..

http://www.bronkzilla.com/images/fotmwhoringpics/tc3.jpeg

test fit on the bronco.. notice the new postion of the hi-lift jack.. .before it used to catch on everything in site.. now its out of the way..

http://www.bronkzilla.com/images/fotmwhoringpics/tc4.jpeg

side view showing how little it sticks out.

http://www.bronkzilla.com/images/fotmwhoringpics/tc5.jpeg

bottom up.. seems very well protect.

http://www.bronkzilla.com/images/fotmwhoringpics/tc6.jpeg

made this hinged hold down/ locking system..

http://www.bronkzilla.com/images/fotmwhoringpics/tc7.jpeg

finished and painted with the new locks jackhart gave me

http://www.bronkzilla.com/images/fotmwhoringpics/tc8.jpeg

:rockon :rockon :rockon :rockon :rockon

This is a really tough month I agree!
I am going to give it a few days to vote.
Bronco on Mogs.........
Bronkzilla........
Scotts rig......
Crawlers rig......
etc......
I need to do some thinking, so get whoring those pics.

"get whoring those pics"

This Month's Nominees are by far the best yet. {NO OFFENSE TOO PREVIOUS NOMINEES}....

60 Something VOTES in such a short period. I am Shooting to past the 300 Mark of VOTES, This Month.....With over 4500 Members, we should not have any PROBLEMS with that....:beer :beer :beer

This month really shows it takes all kinds of Broncos to make this site what it is...from the mostly stock to radical. This site kicks ass. :thumbup :beer :rockon

I could not put it better myself. :lolup Also, This is watt makes this SITE "KICK-ASS".........:thumbup

Allcruisen :imp :usa

When your 16 and don't have much money, you have to compromise. I got this K&N air filter for free because it is 12" and he wanted a chrome cover but they only make 14". So I got it and made a top and bottom for it.
http://broncozone.com/forums/uploads/post-2-1092113669.jpg
Top cut out
http://broncozone.com/forums/uploads/post-2-1092238054.jpg
After beads rolled
http://broncozone.com/forums/uploads/post-2-1092238121.jpg
Here's how I polish the top plate. Using a bench grinder with a polishing wheel on it.
http://broncozone.com/forums/uploads/post-2-1092238297.jpg
All polished and shiny
http://broncozone.com/forums/uploads/post-2-1092238378.jpg

Had to one of these things to put it on my Bronco. Only cost $10
http://broncozone.com/forums/uploads/post-2-1092238473.jpg
Installed with the riser
http://broncozone.com/forums/uploads/post-2-1092238576.jpg
Another. :rockon
http://broncozone.com/forums/uploads/post-2-1092238631.jpg

More pimping.. :beer

SAS Track bar bracket (Also has a brace going to the center crossmember..

http://www.bronkzilla.com/images/fotmwhoringpics/sa1.JPG

radius arm brackets w/ donuts.. angled to relieve the stress on the bushings..

http://www.bronkzilla.com/images/fotmwhoringpics/sa2.JPG

they hang down about 1/4 inch lower than the radius arms.. not much at all

http://www.bronkzilla.com/images/fotmwhoringpics/sa3.JPG

new coilover hoops.

http://www.bronkzilla.com/images/fotmwhoringpics/saa1.jpeg

new lowered bump stops.

http://www.bronkzilla.com/images/fotmwhoringpics/saa2.jpeg

coilovers and bump stops on.. axle at full droop (need a limiting strap..)

http://www.bronkzilla.com/images/fotmwhoringpics/saa3.jpeg

this brace is removeable and connects both coilover hoops together.

http://www.bronkzilla.com/images/fotmwhoringpics/saa4.jpeg

you can see it installed here..

http://www.bronkzilla.com/images/fotmwhoringpics/saa5.jpeg

hydraulic assist ram installed. misc pics of the whole setup

http://www.bronkzilla.com/images/fotmwhoringpics/sa4.JPG

http://www.bronkzilla.com/images/fotmwhoringpics/sa5.JPG

http://www.bronkzilla.com/images/fotmwhoringpics/sa6.JPG

you can see the brace that connects to the center crossmember from the trac bar.... its 2.25x 2.25 x .25 thick square tube.. beafy

http://www.bronkzilla.com/images/fotmwhoringpics/sa7.JPG

another view.. tie rods flipped over (chevy tre's with dom tube) stock pitman arm..

http://www.bronkzilla.com/images/fotmwhoringpics/sa8.JPG

side shot..

http://www.bronkzilla.com/images/fotmwhoringpics/sa9.JPG

twister arm pics

http://www.bronkzilla.com/images/fotmwhoringpics/sa9b.JPG

another twister arm pic.. high angle driveline 1350 cv driveshaft

http://www.bronkzilla.com/images/fotmwhoringpics/sa9c.JPG



:rockon :rockon :rockon :rockon :rockon :rockon :rockon thanks for the votes.. each one is appreciated... :beer

NICE, Crawler! But, I still had to vote for Raf after seeing that thing in action!

it's not like i can compete against the likes of Bronkzilla, dogonmutt and OX1....but here's my little "stocker" posing around my property this afternoon...

in the woods:

http://www.superford.org/getfile/156101/fullsize/trail%203.jpg
http://www.superford.org/getfile/156099/fullsize/trail%201.jpg

in a clearing: (ooh..shiny :toothless)

http://www.superford.org/getfile/156071/fullsize/field%20posing%203.jpg
http://www.superford.org/getfile/156064/fullsize/field%20posing.jpg

And finally, me trying to flex on a little tree that fell down:

http://www.superford.org/getfile/156093/fullsize/log%20flex%205.jpg
(check out all that TTB flex :duh)
http://www.superford.org/getfile/156085/fullsize/log%20flex%202.jpg
http://www.superford.org/getfile/156094/fullsize/log%20flex%206.jpg
http://www.superford.org/getfile/156079/fullsize/log%20flex.jpg

the whole time i was on that tree, I couldn't help but think about this stuck:
http://www.superford.org/getfile/71995/fullsize/only%20time%20john%20got%20stuck.JPG


:thumbup

1....but here's my little "stocker" posing around my property this afternoon...
Hows the minispool working out in that ttb?

the whole time i was on that tree, I couldn't help but think about this stuck:
http://www.superford.org/getfile/71995/fullsize/only%20time%20john%20got%20stuck.JPG

:histerica I was thinking boy I hope he don't slip on over and get stuck!!!:histerica

i never installed it....I really don't wheel anywhere that i need the front to be locked.. except possibly here:

http://www.superford.org/getfile/152351/fullsize/WITC%20stuck.jpg

I do have plans to install it in my SA 44 when it's installed in my trail rig

that thing aint stock :histerica :histerica

Built this 95% by myself.. My cousin pUnK and my pops helped me here and there holding stuff and keeping me from going insane...

http://www.bronkzilla.com/images/100203/DSCF2444.JPG

Started out by welding 1/4" thick plates to the floor where the cage would attach. The plates have holes in them and nuts welded for the cage to frame mounts (with body mount bushings sandwiched in) as soon as i can buy another welder.. sold my welder to pay for the f250..

http://www.bronkzilla.com/images/100203/DSCF2445.JPG

had 8 points total.

http://www.bronkzilla.com/images/100303/DSCF2452.JPG

http://www.bronkzilla.com/images/100303/DSCF2454.JPG

one was even going through the battery box.'

http://www.bronkzilla.com/images/100303/DSCF2456.JPG

wood and clamps served as my assistants throughout the project..

http://www.bronkzilla.com/images/100303/DSCF2458.JPG

one of the first setups i made.. i didnt like it and ripped it out later.. pics of that...

http://www.bronkzilla.com/images/100703/DSCF2485.JPG

http://www.bronkzilla.com/images/100703/DSCF2487.JPG

http://www.bronkzilla.com/images/101203/DSCF2495.JPG

ewwwwwwwwwwww

http://www.bronkzilla.com/images/101203/DSCF2500.JPG

http://www.bronkzilla.com/images/101403/DSCF2511.JPG

i hadnt realized i didnt like the rear at this point.. i started work on the front

http://www.bronkzilla.com/images/101603/DSCF2516.JPG

visors can still go down..

http://www.bronkzilla.com/images/101603/DSCF2519.JPG

halfway done with the front

http://www.bronkzilla.com/images/101603/DSCF2529.JPG

i changed the rear setup

http://www.bronkzilla.com/images/102203/DSCF2657.JPG

http://www.bronkzilla.com/images/102203/DSCF2662.JPG

http://www.bronkzilla.com/images/102203/DSCF2660.JPG

we did a test fit of the hard top and realized it didnt fit so i had to make the rear smaller..

http://www.bronkzilla.com/images/102703/DSCF2665.JPG

mounted the seatbelts to the cage

http://www.bronkzilla.com/images/102803/DSCF2666.JPG

http://www.bronkzilla.com/images/102803/DSCF2667.JPG

finished the front

http://www.bronkzilla.com/images/102803/DSCF2669.JPG

finished the middle

http://www.bronkzilla.com/images/102803/DSCF2670.JPG

the cage was set up in a way that i could remove it from the bronco to do finish welding and painting..
rear coming out

http://www.bronkzilla.com/images/102903/DSCF2680.JPG

front coming out

http://www.bronkzilla.com/images/102903/DSCF2681.JPG

gussets added

http://www.bronkzilla.com/images/102903/DSCF2684.JPG

the areas that are to be welded together or to the bronco were taped off.. the rest is painted.

http://www.bronkzilla.com/images/103003/DSCF2686.JPG

nice spidery curves

http://www.bronkzilla.com/images/103003/DSCF2688.JPG

http://www.bronkzilla.com/images/103003/DSCF2689.JPG

http://www.bronkzilla.com/images/103003/DSCF2691.JPG

put it back in and welded it together and to the bronco

http://www.bronkzilla.com/images/103103/DSCF2701.JPG

http://www.bronkzilla.com/images/103103/DSCF2704.JPG

http://www.bronkzilla.com/images/103103/DSCF2705.JPG

top on

http://www.bronkzilla.com/images/110103/DSCF2712.JPG

cage through the battery box :histerica

http://www.bronkzilla.com/images/110103/DSCF2713.JPG

nice view

http://www.bronkzilla.com/images/110103/DSCF2714.JPG

inside

http://www.bronkzilla.com/images/110603/DSCF2725.JPG

seat still slides all the way

http://www.bronkzilla.com/images/110603/DSCF2726.JPG

went crazy with the roll cage padding

http://www.bronkzilla.com/images/123003/DSCF0086.JPG

http://www.bronkzilla.com/images/123003/DSCF0087.JPG

:rockon :rockon :rockon :rockon :rockon :beer

decided to throw a vote in Bronkzilla's direction...

its sat long enough and the new reincarnation of an old favorite is well deserving.

besides, Raffa is one of the nicest dudes I know....so even if you dont think his Bronco is 'All That' ( :twak ) then ya ought to vote for the man behind the machine. :thumbup

That Roll Cage is f@#kin awesome.

And now Im going to place my vote.

Rock on Bronkzilla

I can't vote right now... I need to go change my pants! :brownbag

Raf... you are the MAN!!!http://beaty625.com/rblicons/bow.gif

EDIT: Oh yea... who voted for me? "Whatsa matta you?" :wacko


(thanks)

Now seriously... DON'T VOTE FOR ME! :slap :goodfinge
I'm gonna practice a little pic whorin' here, not for votes... just to contribute to the contest. So... DON'T VOTE FOR ME! :histerica

In the beginning there was... LIGHT!
http://www.superford.org/getfile/45795/fullsize/Bronco_BEFORE.jpg

going...
http://www.superford.org/getfile/45800/fullsize/Workingbackside.JPG (http://www.superford.org/registry/vehicles/showmedia.php?id=45800&original=1)

going...
http://www.superford.org/getfile/45805/fullsize/Driver_Rear.JPG

GONE!!!
http://www.superford.org/getfile/45808/fullsize/FordFDSide.JPG (http://www.superford.org/registry/vehicles/showmedia.php?id=45808&original=1)

The HEADER Install...
http://www.superford.org/getfile/45882/fullsize/pass-header-align2.JPG (http://www.superford.org/registry/vehicles/showmedia.php?id=45882&original=1)

Engine R&R...
http://www.superford.org/getfile/105502/fullsize/Assembly%20(6).JPG (http://www.superford.org/registry/vehicles/showmedia.php?id=105502&original=1)

Some new shoes...
http://www.superford.org/getfile/114521/fullsize/Poser1.JPG (http://www.superford.org/registry/vehicles/showmedia.php?id=114521&original=1)

Explorer seats and updated console...
http://www.superford.org/getfile/144838/fullsize/Side%20(1).JPG (http://www.superford.org/registry/vehicles/showmedia.php?id=144838&original=1)

And before ya go thinkin' that the Stone Bronco's just a freaky lookin' street queen... well, ya better think again! :goodfinge
http://www.superford.org/getfile/45818/fullsize/FlexDr.JPG
http://www.superford.org/getfile/45904/fullsize/Log_Crawler.JPG
http://www.superford.org/getfile/73341/fullsize/RockOn.JPG
http://www.superford.org/getfile/106614/fullsize/Snow%20Bronco%202.JPG
http://www.superford.org/getfile/106626/fullsize/Bronco%20Mountain%20Pass.JPG
http://www.superford.org/getfile/118710/fullsize/HillTop%20(2).JPG
http://www.superford.org/getfile/118696/fullsize/NatureBronk2.JPG
http://www.superford.org/getfile/130984/fullsize/Uphill.JPG
http://www.superford.org/getfile/143126/fullsize/Tug.JPG
http://www.superford.org/getfile/143131/fullsize/HillClimb%20(1).JPG
http://www.superford.org/getfile/143135/fullsize/HillClimb%20(5).JPG
http://www.superford.org/getfile/143137/fullsize/FlexHole%20(1).JPG
http://www.superford.org/getfile/143138/fullsize/FlexHole%20(2).JPG
http://www.superford.org/getfile/143147/fullsize/HomeClean.JPG (http://www.superford.org/registry/vehicles/showmedia.php?id=143147&original=1)

Hope ya'll enjoyed... cuase I'm spent.
Now before ya go thinkin' about clickin' on me when you should be clicking on Raf or Trey or.... DON'T DO IT... OR ELSE!!!http://fool.exler.ru/sm/budo.gif

http://www.supermotors.org/getfile/88948/fullsize/dejavu.jpg
http://www.supermotors.org/getfile/88952/fullsize/me1.jpg
http://www.supermotors.org/getfile/127485/fullsize/more%20swimming.jpg
http://www.supermotors.org/getfile/124331/fullsize/treetug.jpg
http://www.supermotors.org/getfile/156349/fullsize/130monica-med.jpg

:lolup

Well, I voted for Raf because of many reasons.
This was tough for me because of all the other dedicated rigs, and the serious work that this months nominees put in.
I get a lot of my ideas from things that Raf has already done, or threw around.
He has always helped me with everything, and every question related to, or unrelated to Broncos without judgement or insult.
He is going to give me his 8 lug outers when he gets his 60 (:goodfinge)
and he is one of the top modified Broncos on the site.
So thanks again for everything Raf. You deserve a big win.

Scott (Dognutz) was a close second for all the same reasons. He is a stand up guy, and a real friend. He has also done a ton of good things to his Bko.
I wish we could pick two, but obviously we cant.
Next time bro :beer :beer :beer

gotta go with raf. that truck is crazy because of all the work he has done to it. good guy too.

Finished up the body work. Lets keep the voting coming
http://www.supermotors.org/getfile/156272/fullsize/Picture%20503.jpg
http://www.supermotors.org/getfile/156273/fullsize/Picture%20504.jpg
http://www.supermotors.org/getfile/156492/fullsize/Picture%20508.jpg
http://www.supermotors.org/getfile/156524/fullsize/Picture%20509.jpg

http://www.bronkzilla.com/images/103003/DSCF2688.JPG

Got my VOTE :thumbup

gotta love the 4 doors






oh yea his bronco is half ass decent too :shrug

gotta love the 4 doors


psst...he sold the limo to buy his super duty

I voted for Raf. Daaaaammmnnn. I had no idea he had such a lead. It wasn't an easy decision though. There was tight competition as far as my vote went this month.

yeah, I dont usually have a problem voting, but it is tuff this month.

Jim, the mogs look good.
Scott, always a contender and someone I look to for advice/ideas
Raf, known for a while now as evident from those pics (those are pretty old Raf, funny shit) and has done a lot of work and learned a lot over the last few years.
and then there is Pepe, who is tireless in helping out the site in addition to his bronco and header tech article which helped me out a bunch.
Gub ni and trey's are nice too.
Tough choice, I just wont vote.

Alright... who's voting for me again?!? Didn't I say NOT TO VOTE FOR ME!! :twak
(thanks)

Now seriously... DON'T VOTE FOR ME!!! :goodfinge

PLUG. thanks for the props, but you better VOTE FOR SOMEBODY (besides me)!!! :beer

Gotta vote Bronczilla, that pic with half the truck in the hole and the nose pointed to the sky is just awesome. :rockon

Wow, 106 VOTES In just a few days into this.....

I am so sorry I have not been able to post anything in the past few days. Seems like my 'Puter does not want to work....:twak

Everyone, we can hit the 300 mark by the end of this competition. I know we can.....

I will try and keep up with the FOTM {Cant say the same for my 'Puter}....

So, if you see I have not posted, dont think I am MIA. I am just havin puter probs.

GOOD LUCK TO ALL AND LETS GET-R-DONE!!!!!!

Allcruisen :imp :usa

http://www.bronkzilla.com/images/103103/DSCF2704.JPG

If this isnt the bronco of your dreams... then your having the wrong dreams. :beer

I've only been here about a year, but I've never seen a FOTM contest like this one. Simply amazing, all of these rigs are inspiring.

You all do the site proud.

Same here, I dont know what to do :shrug Just awsome everyone! this is gona be tough!!

Tough or not, Zilla's running away with this thing...whats the largest win margin???

Anybody want to bet who is going to win?

damn this is hard ..

bnkrtstk
crawler
OX1
Bronkzilla
Gub_Ni

i'll have to wait a couple more days to decide

damn this is hard ..


ahem.... ahemm.... cough cough...

If you vote for BRONKZILLA all your wildest dreams will come true!! :histerica

:lolup ...said the genie in the bottle with a sly grin! :goodfinge


Whats' up Joe... the Stoned Bronco not good enough for ya? Oh yea.. your NOT supposed to VOTE FOR ME! :thumbup

What I wanna know....is the tally for how much has been inVESTED into bronkzilla :shocked

:lolup ...said the genie in the bottle with a sly grin! :goodfinge


Whats' up Joe... the Stoned Bronco not good enough for ya? Oh yea.. your NOT supposed to VOTE FOR ME! :thumbup

VOTE FOR PEPE`!!!!!!!!!!!!!!!!!!!!!!!!!!!! :twak :thumbup

What I wanna know....is the tally for how much has been inVESTED into bronkzilla :shocked

Wheeling Weekend = $250 Bux, Hair Cut = $25 Bux, BRONKZILLA = PRICELESS :histerica :histerica

Allcruisen :imp :usa

Anybody want to bet who is going to win?

^ Its still anyone game. Even though BronkZilla has the LEAD. :rockon

All I ask is for ALL MEMBERS too please cast their VOTES. I really wanna HIT 300 VOTES!

Allcruisen :imp :usa

The competition is so Close this month That I am waiting till the end..
you never know when some one might post something that would sway me to vote for them...
I did'nt vote for president till nov.4th

So what is the dead line to have all the votes by? :shrug

So what is the dead line to have all the votes by? :shrug
25th about 10pm - READ THE RULES!!! (http://www.fullsizebronco.com/forum/showthread.php?t=1884) :goodfinge

This is a great contest, with some very impressive choices. Yes, I voted for Bronkzilla, but I expect to see several of these trucks win next year.

Crawler I really like where you are heading. I want to see a few sets of wheeling pics and some information about how things work or what you would do differently.

Pepe your truck may not have the most flex, or the biggest lift, but you have a nice truck. Don't sell yourself short. (no pun intended :histerica ) Your efforts here on the board are worthy of votes. I don't want to jinx this months vote, but look how nice things have gone so far :clap .

More pics I took. I was grounded and couldn't get on the coputer so here are more pics.
http://www.supermotors.org/getfile/157436/fullsize/Picture%20523.jpg
http://www.supermotors.org/getfile/157437/fullsize/Picture%20519.jpg
Did a lot of bracing for strength
http://www.supermotors.org/getfile/157439/fullsize/Picture%20518.jpg
http://www.supermotors.org/getfile/157440/fullsize/Picture%20517.jpg
I can't get wheeling pics yet because it's not licensed yet and it's in the painting stages

Holy cow, a kid not old enough to get his license is tied for 2nd on FOTM after 143 votes have been cast.! :shocked :histerica :histerica

Givem hell kid! :rockon

Actually... crawler is just old enough, as of last month.
just his rig isn't licensed yet.

crawler... don't sweat missing a few days. Your not even done yet and already compeating. You will definatly have your day... especially when you get that rig out to whatever your building it up for! :rockon

Damnit AC... :goodfinge Now look what ya went and did! :banghead
Ya went and suckered a few more folks into votin' for me! :twak

DON'T WASTE YOUR VOTE... I MEAN IT! I KNOW KUNG-FU! http://fool.exler.ru/sm/kar.gif

Thanks RedDirt and everyone else, but give your votes to someone that has a chance at stealing this thing from THE MONSTER THAT IS...


BRONKZILLA

Actually... crawler is just old enough, as of last month.
just his rig isn't licensed yet.

My bad! :brownbag He's an old man already!

Better add one of these > :beer and these > :drinkbud in rootbeer style. :toothless

I KNOW GANJA-FU!

really :toothless

i am still torn, crawler, gub ni and zilla :banghead

Yeah my bronco gets registered in December, but I can already drive because I have my pemit. I really appreciate all the votes from everyone
My new bling.
Classic II's
http://www.supermotors.org/getfile/157447/fullsize/Picture%20521.jpg
http://www.supermotors.org/getfile/157462/fullsize/Picture%20522.jpg
Got them from ford005

Got my lights working and wiried up
http://www.supermotors.org/getfile/157464/fullsize/Picture%20214.jpg
With headlights
http://www.supermotors.org/getfile/157466/fullsize/Picture%20215.jpg
Flash seems to ruin it
http://www.supermotors.org/getfile/157470/fullsize/Picture%20216.jpg
Dash lights
http://www.supermotors.org/getfile/157471/fullsize/Picture%20221.jpg
More to come. KEEP VOTING!!!!

Nice wheels!!! I was looking at those too...
Sweet Dash, too! We'll be talking about a custom dash for my next project after my stang's done...

I'll burn one for 4XPEPE'. Nice rig!!

zilla :brownbag

I KNOW GANJA-FU! really :toothless
I have no idea what your talking about... excuse me for one second...
http://www.concept420.com/marijuana-pictures/data/media/1/dave.jpg

I'll burn one for 4XPEPE'. Nice rig!!
Thanks! Now I must give you the Ganja-FU beating of your life!!! :goodfinge
I'm on my way to your house as we speak... http://fool.exler.ru/sm/fly2.gif

Can't believe it... the more I say NOT TO VOTE FOR ME, the more votes I get.
Hmmm.... ok so, PLEASE VOTE FOR ME!!!



BTW... I got a set of 4.10 gears in the garage. Now if I can ever save up the money to have the rear rebuilt, I'll be :rockon

Unlike Kerry, I don't have to wait to count the votes in order to concede this race! I'd like to throw my votes to Zilla :rebelflag

Here's a pic of my little Bronco in action today. How many of you can compete with this?

http://mywebpages.comcast.net/gubni/forumpics/cashair.JPG

I voted Zilla... but it was close between you(Zilla) and crawler...
sorry crawler :brownbag

Here's a pic of my little Bronco in action today. How many of you can compete with this?

http://mywebpages.comcast.net/gubni/forumpics/cashair.JPG
Awesome shot!!!

Pepe`, I did not know letterman got STONEDhttp://fool.exler.ru/sm/fly2.gif :shrug No wonder I have always laughed at his JOKES....:histerica :histerica :chili: :chili: :drinkbud :rockon :rockon :histerica :histerica

Although it seems to be going one way...."Cough, Cough"....I am still asking for the 300 VOTES........I know we can do it :beer :beer :beer :beer

Allcruisen :imp :usa

How many we got so far? :shrug

Voters: 156.

Whats the record? :shrug

Here's a pic of my little Bronco in action today. How many of you can compete with this?

http://mywebpages.comcast.net/gubni/forumpics/cashair.JPG

right on! :thumbup

I've gotten a lot more progress. Got it all primed today with high build primer
http://www.supermotors.org/getfile/157757/fullsize/Picture%20528.jpg
http://www.supermotors.org/getfile/157761/fullsize/Picture%20532.jpg
http://www.supermotors.org/getfile/157764/fullsize/Picture%20531.jpg
http://www.supermotors.org/getfile/157766/fullsize/Picture%20533.jpg
http://www.supermotors.org/getfile/157768/fullsize/Picture%20535.jpg
http://www.supermotors.org/getfile/157769/fullsize/Picture%20536.jpg
http://www.supermotors.org/getfile/157771/fullsize/Picture%20537.jpg

I've gotten a lot more progress. Got it all primed today with high build primer

I wish I could re-vote... my vote would go to you!

I wish I could re-vote... my vote would go to you!
Its just for that reason why I must wait its real tuff this month!
But to be honest I'll probably vote for raff!

ill have some new wheeling pix next weekend..

ill have some new wheeling pix next weekend..
I just need to be pushed a little harder in your direction! :thumbup
But at this pioint my vote is your then would probably be Crawler!
He just happen to be preping his paint at the right time top make me want to hold on & see it!

I just remembered, The last time I said Give a real good pic!
To another FSB'er..
It was D-diesel & he proceeded to roll his bronco onto the pass. side!

OUCH!!! :histerica

You cursed him.
Hey Crawler, what color is she gonna be?

You cursed him.
Hey Crawler, what color is she gonna be?
white

Everybody else also wants to have a BlancoBronco :rockon

Everybody else also wants to have a BlancoBronco :rockon

Except for Blue
:twak

White, huh? Hmmmmm. Hey Cam, I don't want to have a blancobronco. I have one but she's gonna get painted asap. I've owned only white vehicles and I don't know about it...

Except for Blue
:twak :lolup :wacko :lolup :histerica

WOW, I could be wrong but I think Raf has the highest number of votes of one nominee ever! DAMN BOY!

The craziest thing about that is that this month has some really great rigs too. Its not just zilla and a bunch of turds, what a great bunch this month, come on people please vote.

I almost did'nt vote for pres. Because I was'nt happy with either one .
But when you bring out some really cool compeditors then the votes will come in..
Man I hope the next time i'm invovled in the comp. its not this tuff.

Despite my best efforts to convince you all not to vote for me (not to mention an outstanding show by some of our other very worthy contestants) some of you have still decided to vote for me. :shrug thanks :brownbag

Now I want everyone to realize, again... this is the last contest of 2004.
Whoever wins the contest will also be the final contestant in our 2nd Annual FULLSIZE BRONCO OF THE YEAR contest. So choose wisely and make your vote count! :rockon

white


I think you should just leave it flat black that looks badass! :rockon

Well i gotta vote for Crawler. bronkzillas nuts but man you gotta give props to crawler man that kids done some awesome work he might not have many wheeling pics but when hes done man that thing is gonna be awesome!

Awesome job dude! :thumbup

stoned bronco gets my vote

I had to Vote for Ox. I've been drooling over his broncos since I was in highschool and just found the bigbronco mailing list back around 96-97.

Quazimoto Is a kick ass freaking bronco. And he's gotta be the only one to go to the mud Bogs in a white truck, White Jeans and a White Shirt(I gotta see if I still have that picture it's great)

I gotta give my vote to Bronkzilla--there have been many, many months that he has graciously bowed out of FOTM because he didn't think his Bronco was ready, but Dec. '04 belongs to Raffa :thumbup :rockon

more pics...........NOW.......please?

i already voted, but i do wanna see more pics

Its November 16th (Barely)

I can honestly say this is by far the best FOTM contest, ever. Some seriously awesome rigs, awesome guys, and awesome knowledge in those 9 nominees.

Crawler is younger then me, and amazes me everytime he post pics of his progress.

But, Zilla... Not only is his POS actually finished, but he actually moved it from his driveway. Hes not only a good guy, but hes knowledgable, does alot for the site, and is just a great guy to have on the board.

My vote is for him, Its his month.

As everyone has already said, lots of great looking rigs this month. Zilla's is awesome, but I like OX's a little better.
Congrats to everyone in the running this month!

more pics...........NOW.......please?
Well... don't vote for me, becouse the only new pics I got fer ya is of my baby sleepin' in her comfy new driveway.
http://www.superford.org/getfile/158233/fullsize/sleepin%20(2).JPG
http://www.superford.org/getfile/158231/fullsize/sleepin%20(3).JPG

But, it's better than nuthin'. :shrug :brownbag

But, it's better than nuthin'. :shrug :brownbag


its better than this...

whistle tips.. :histerica :histerica :histerica :histerica 2.95 each

http://www.bronkzilla.com/images/042404/DSCF5788.JPG

custom soft top :rockon :rockon

http://www.bronkzilla.com/images/091204/PICT0632.JPG

no way dude.... love the new topper! :histerica
I don't suppose they come in "granite"? :goodfinge

I had to Vote for Ox. I've been drooling over his broncos since I was in highschool and just found the bigbronco mailing list back around 96-97.

Quazimoto Is a kick ass freaking bronco. And he's gotta be the only one to go to the mud Bogs in a white truck, White Jeans and a White Shirt(I gotta see if I still have that picture it's great)

I think your pushing it with the White Jeans. :histerica When are they gonna start Broncosssssssssss of the month, sounds like you have a nice stable goin.

I think your pushing it with the White Jeans. :histerica When are they gonna start Broncosssssssssss of the month, sounds like you have a nice stable goin.

Am I going to have to go find that pictures?

Ah either way still kick ass Broncos... Not Da Horse(wonder how many people on here know that bronco) those but still cool :beer

So Pepe, your "Don't Vote For Me" strategy has netted you 14 votes so far, lol.

Yea Clarko... it's not working out so well. :banghead
I appreciate the "complimentary" votes I've recieved... but I also knew from the beginning that I didn't have a snowballs chance in hell, at winning this month.

Someday... I'll get this beast built up to the point I had in mind when I got that paintjob, and then... LOOK OUT BOYS...
The STONED BRONCO WILL RULE THE WORLD!!! :rockon :histerica
http://www.superford.org/getfile/144842/fullsize/OutSide.JPG

(until then... I'm happy to even be in the same contest as some of these guys and thier built up Monster-Bronco's. :brownbag :thumbup )



102 votes away from the GOLDEN 300 MARK!!!
Bronzilla in the lead with a comfortable 61 votes up on his closest competitor.
Hmmm... it's still anyones game (yea, sure :slap ) if we can get those last 102 votes in. :shrug

C'mon FSB... SHOW US THE LOVE!!! It's the END of 2004!!!
Let's go out with style and kick out 325 votes. I know we can do it...
SO GET TO IT!!! :goodfinge

(side note: I'd like to personally thank everyone competing, voting and/or commenting on this months F.O.T.M. contest. It's been said this is one of our best F.O.T.M. contests ever, and besides the wickid trucks, I know that the cool attitudes being displayed are a big part of this being a great contest to close out the year on. THANKS AGAIN EVERYONE! YA MAKE ME PROUD... I KNEW WE COULD DO IT!!!)
:rockon :rockon :rockon :rockon :rockon :rockon :rockon :rockon :rockon

New addition... inspired by WasACop's thread on... ex-service rigs.
Well... mine wasn't ex-anything... but it is now!

http://www.superford.org/getfile/158410/fullsize/Past_Life.jpg

C'mon FSB... SHOW US THE LOVE!!! It's the END of 2004!!!
Let's go out with style and kick out 325 votes. I know we can do it...
SO GET TO IT!!! :goodfinge

(side note: I'd like to personally thank everyone competing, voting and/or commenting on this months F.O.T.M. contest. It's been said this is one of our best F.O.T.M. contests ever, and besides the wickid trucks, I know that the cool attitudes being displayed are a big part of this being a great contest to close out the year on. THANKS AGAIN EVERYONE! YA MAKE ME PROUD... I KNEW WE COULD DO IT!!!)
:rockon :rockon :rockon :rockon :rockon :rockon :rockon :rockon :rockon

:stupid I could not agree more. These past two months have been awesome. Now lets get some more pics comin. Seven days left and I know we can hit the 300 VOTE MARK. :rockon

Allcruisen :imp :usa

My vote went to Crawler.

But it could have easily gone to Ox, Raf, or Scott.

Ok... I held out as long as I could.

I voted for Bronkzilla because he's put a ton of work into that truck and it shows.

Gotta respect a man who has that labor of love thing going on ya know.

Can't wait to see some video of that rascal in action. :thumbup

My vote went to Crawler.

But it could have easily gone to Ox, Raf, or Scott.


Thanks Burl Swift. I should have some more pics soon. Just been sanding. Maybe it will be white by the end of this contest.


Keep voting everyone. Lets make this the record month of votes!

Keep voting everyone. Lets make this the record month of votes!
Now that's the SPIRIT! :stupid

[Pepe` in Cheerleaders getup]
We got SPIRIT YES WE DO WE GOT SPIRIT... SO F*CK U! :goodfinge
[/Pepe` out of Cheerleaders getup]

I think I can see at least one record coming on.
I haven't been tracking months or votes or anything specific, but I don't think any F.O.T.M. contestant has ever rated 100 votes to himself and Raf is about as close as anyone has ever been.

Bastard! If he didn't deserve it so much I'd call foul! :goodfinge

BTW... who's been voting for me again?!? KNOCK IT OFF! :banghead
I swear I'm about ready to take this rubber foot off and stick it.... oh, uh... nevermind. Sorry. (thanks ya'll :brownbag )

OK, so even a VOTE for me is one step closer to 300, so VOTE VOTE VOTE!!! :rockon

Everybody else also wants to have a BlancoBronco :rockon

Not me i get enough OJ jokes.....

Not me i get enough OJ jokes.....
That get kinda old fast hu?


You know after reading 4xPepes last post I cant help but wonder.....
he seems to sound like a democrat :shrug

kinda gore'ish from about 4 yrs ago...

I said just kinda... :goodfinge

That get kinda old fast hu?


You know after reading 4xPepes last post I cant help but wonder.....
he seems to sound like a democrat :shrug

kinda gore'ish from about 4 yrs ago...

I said just kinda... :goodfinge
Nope, he's not gore.

alright... now yer just temptin me to delete some posts! :goodfinge


OK... we need some more votes, this race is extremely close call between Bronkzilla... and EVERYONE ELSE PUT TOGETHER! :banghead :histerica :brownbag


BRONKZILLA: 44.91%
EVERYONE ELSE PUT TOGETHER: 55.09%

WE OWN YOU RAF!!! NO WAY YOU CAN BEAT ALL OF US PUT TOGETHER MAN!!! :goodfinge


[LIZZY BORDEN] :rockon
It's ME... against the WOOooooOOooooRLD.... don't push me too far!!!
[/LIZZY BORDEN] :rockon

:lolup :lolup :lolup :goodfinge

pepe has officially lost his mind... :wacko

the bronco is all packed up and ready to hit the trails this weekend.. ill post pics sunday when i get back :rockon

pepe has officially lost his mind... :wacko

the bronco is all packed up and ready to hit the trails this weekend.. ill post pics sunday when i get back :rockon

We have known Pepe` now for a few years and it took you that long to figure it out? :goodfinge :goodfinge :histerica :histerica :histerica

{I cant get Pepe`s Picture, of him in a cheerleading outfit out of my mind} :wacko :wacko :wacko :wacko :goodfinge

Allcruisen :imp :usa

All we need now is Only 84 more VOTES.

That was a nice try Pepe`, Added all the Members votes against Rafa :histerica :histerica :histerica :histerica

LETS GO OUT WITH A BANG THIS LAST MONTH OF THE YEAR !!!!!!!!!!!!!

Allcruisen :imp :usa

is this the most votes anyone has ever recieved in a month?

when does FOTY start?

wes

I think I will just congradulate zilla now.

Yes, looks like he has it in the bag.

all loaded up and ready to hit the trails.. be back sunday night with pictures..

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/PICT0788.JPG

Nope, he's not gore.

Yeah, he's more like Ralph Nader sucking votes. :brownbag

There must be a lot of closet Corvair drivers on here. :drinkbud

Yeah, he's more like Ralph Nader sucking votes. :brownbag
BlueBronco-> :cry

:twak :goodfinge

Is that I have been wanting to vote for Raf all along but now its like jumping on the band wagon... :histerica

Ok more pics. With grille for fitment of hood.
http://www.supermotors.org/getfile/157753/fullsize/Picture%20526.jpg
http://www.supermotors.org/getfile/157755/fullsize/Picture%20527.jpg
http://www.supermotors.org/getfile/157752/fullsize/Picture%20525.jpg
http://www.supermotors.org/getfile/157751/fullsize/Picture%20524.jpg
Paintin' the jams tomorrow.

If there is still 100 more votes out there it can still be a competition :goodfinge

Thats something to consider.. :goodfinge

If there is still 100 more votes out there it can still be a competition :goodfinge

Hey, watch the "potty mouth" young SkyWalker!!! :slap


Edit: Or should I say "potty finger" . . .

:goodfinge



Come on people vote. There are so many people on here that we could have over 500 votes if everyone paid attention to this.

Hey 4xPepe` maybe you should make a lionk in the General; Chit Chat forum or just make a link in every forum to get people used to voting. Just throwing out ideas.

VOTE
Not necessarily for me but for anyone, just want to get this contest some more votes. Come on everyone!

i voted crawler, i've been following raf's bronco for ages, but i'm so impressed with the work that this kid has done, that it has swayed my vote his way.. nice work man, keep it up..

:beer :beer

on a side note, I'm waiting for a Holley pro-jection in the mail that i picked up off ebay, is it worth doing a write up, and then testing it and pointing out the benefits/drawbacks of the setup? I mean would anyone be interested? well, might do it anyway and see.. I should be receiving it in the mail in 2 days, will take install photos the whole way then take it out and test it on extreme angles (my only bad experience with my holley carby)..

:rockon :rockon

anyway.. keep up the good work crawler, and well done to the other broncos this month, all awesome machines..
Paul.

:chili: :chili:

on a side note, I'm waiting for a Holley pro-jection in the mail that i picked up off ebay, is it worth doing a write up, and then testing it and pointing out the benefits/drawbacks of the setup? I mean would anyone be interested?
I would be interested to see how good it does. That's my backup plan for a friend's project.

After a lot of sanding to get it smooth and ready for paint.
http://www.supermotors.org/getfile/158886/fullsize/Picture%20540.jpg
http://www.supermotors.org/getfile/158887/fullsize/Picture%20541.jpg

Wow, Rafa has hit the 100 Mark :clap.....I believe that is a first....With four more days left and 74 VOTES out there, I know we can hit the 300 Mark....:chili:

Allcruisen :imp :usa

:goodfinge



Come on people vote. There are so many people on here that we could have over 500 votes if everyone paid attention to this.

Hey 4xPepe` maybe you should make a lionk in the General; Chit Chat forum or just make a link in every forum to get people used to voting. Just throwing out ideas.

VOTE
Not necessarily for me but for anyone, just want to get this contest some more votes. Come on everyone!

Crawler, I have done that in the past. I have recieved some feedback and a couple of VOTES. I was planning on waiting 'till Monday and then hit it....

Thanx for the Ideas and GOOD LUCK!

Allcruisen :imp :usa

PS You are right, with all the members we have here, there is no way You guys dont deserve atleast a 500 Vote Mark.....But, I will settle for 300 VOTES.....Baby steps first, then walk, then We RUN!!!!!! :rockon

Crawler I admire what you as a 17 year old have done with that Bronco, keep up the good work and it will be a top qualifier. :clap

Bronkzilla that Bronco is just flat out awesome, I am not big on the newer (older than 79 to me) Bronc's but some of those pic's you put up have swayed me.

My vote is in! Good Luck to all.

my vote has been cast

some new pics..

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/PICT0789.JPG

http://www.jeepaholics.com/support/files/peteyg/20041121143340_raf_notching1.jpg

soft top off and ready to play...
http://www.bronkzilla.com/images/truck%20haven%2011-20-04/PICT0802.JPG

ill post up the pictures of what lead up to the damage as soon as someone posts them.. some of this will make sense later.. especially when i post the video...

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/PICT0803.JPG

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/PICT0804.JPG

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/PICT0805.JPG

the kind of trails we were doing.. i was following a group of jeeps and early broncos... awesome group of guys and girls...

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/PICT0808.JPG

door got pushed in going up... without the sliders and lower exo my truck would be in wayyyyyyyyyyyyyyyyyyyy worse shape..

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/PICT0809.JPG

the trail i just ran.. well part of it.. it was pretty bad... broke my jerry can holder hinge....

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/PICT0814.JPG

night wheeling..

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/PICT0817.JPG

started pouring.. no top on the bronco.. doh

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/PICT0833.JPG


ill post the action shots as soon as i get them.. some sweeeeeeeet video too.. :rockon :rockon

Nice :rockon

more pics..


http://www.bronkzilla.com/images/truck%20haven%2011-20-04/ICT0834.JPG

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/ICT0835.JPG

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/ICT0854.JPG

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1736.jpg

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1740.jpg

woo hooooo.. got some more.... :rockon


http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1748.jpg

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1749.jpg

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1753.jpg

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1755.jpg

getting them as others upload them...

i think it is safe to say who won :shocked

got some more.. (to add to the tons i just posted on the last page) :rockon

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1758.jpg

this was pretty normal out in this place.. coolest wheeling spot ever!!!

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1759.jpg

chris hanging on.. with the leather seats he was sliding all over the place.. :histerica

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1761.jpg

very tight..

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1762.jpg

used the sliders to pivot around stuff like this...

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1763.jpg

damn Z turns...

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1764.jpg

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1776.jpg

ill get more in a bit.. :histerica

i wish i had video of this spot.. we made it down and i had a hard 90 degree turn to the right.. first try i went into the wall.. i was able to back up and pivot around..

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1778.jpg

slid off the ledge and broke the hinge on the jerry can holder.. they popped out... they were empty from hollister...

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1779.jpg

:histerica

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1781.jpg

just playing around on the way back to camp.. we kinda got "lost"

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1782.jpg

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1783.jpg

this is what happens when you let someone else drive your bronco.. they get into some cool spots...

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1787.jpg

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1788.jpg

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1789.jpg

quick video chris took on his camera.. like 6mb

http://www.superford.org/getfile/159163//MVI_1784.avi

same file.. different location online

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/video1.avi

so raf, did you blow up the 44 yet?

wes

nope.. it kicked ass... i pushed it harder than i think i ever have before.. it did great.. ive never had so many people compliment me on my truck.. it felt great that something i built actually worked.. it worked even better than i had ever invisioned.. this park flexed the truck left and right... it was amazing how stable it felt.. im happy...

wow

some of the most kick ass pictures i've seen in a while. how does the rear flex in that? it always looks like the front is way flexed out and the back is only moving a little bit. looks good, though

it doesnt flex as much but it did its job real well.. i have no complaints.. :toothless

Raf, all I have to say is God damn! Hey I have a pair of tails left over from our parts truck, want em?

damn.. should have waited.. that would hae swayed my vote the other way..

:chili: :chili:

i think it is safe to say who won :shocked
RAF. get's my vote!!!! :chili:
I planned on voting for him anyways...
It just seemed more exciting waiting for the last minute! :thumbup

nope.. it kicked ass... i pushed it harder than i think i ever have before.. it did great.. ive never had so many people compliment me on my truck.. it felt great that something i built actually worked.. it worked even better than i had ever invisioned.. this park flexed the truck left and right... it was amazing how stable it felt.. im happy...

i'm with Raf on this since i rode shotgun and test drove it. not to brag but it really felt like we were doing as good or even better then the jeeps and early broncos in our group. like he said the bronco does feel very stable and with tons of traction on those loose hills. at times it felt like we were unstopable lol.

my vote is to u and ur bronco :beer
nice work Rafael :thumbup

Great pics, Raf....:thumbup Thanx for sharing them with us....Looks like someone had FUN!

Allcruisen :imp :usa

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1782.jpg

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1783.jpg

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1787.jpg

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1788.jpg

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1789.jpg

got any hi-res versions of these?

they be pimpin'

chris took those shots..

very nice dude, glad to finally see that thing working the trails

Raf...I bet a grin never left your face. Nice to see you get your rig out, I bet you suprised a bunch of those Jeepers.

Looks great. Did Chris ride shotgun the whole trip or did he wheel his rig? I see it in one of the pictures but its parked.

Raf...I bet a grin never left your face. Nice to see you get your rig out, I bet you suprised a bunch of those Jeepers.

Looks great. Did Chris ride shotgun the whole trip or did he wheel his rig? I see it in one of the pictures but its parked.

Everyone was very impressed. A well built rig gets respect, regardless of what it is, and Bronkzilla is one well built rig. He took everything we had to dish out, and it was great to watch. EVERYONE took body damage this trip out, so it wasn't just a small rig vs. big rig thing. We were gettin' it for sure. :chili:

There are pics of Chris wheeling, btw...I figure Raf didn't want to post them here since this is the FOTM thread, not the "look at all of our wheeling trip pics!" thread. :thumbup

I didn't mean for it to sound like a Jeep vs. Bronco thing, nor did I mean to take away from the FOTM.

Thanks, I search for the pictures of Chris, I love that thing.

:rockon :rockon :rockon BRONKZILLA :rockon :rockon :rockon

damn raf, incredible pictures!!! love those rock lights too!

Spotters or beer drinkers? Or is it Heep guys going, holy shit, is that a FSB of the decade . . .



http://www.bronkzilla.com/images/truck%20haven%2011-20-04/IMG_1776.jpg

VIDEO!!!

69.2mb (well worth the download)

http://www.bronkzilla.com/images/truck%20haven%2011-20-04/zillatruckhaven.mpg


tell me what you think.. i wish i had more videos to post but we were too busy having fun..
:rockon

69.2 MB? Holy File Size, Batman!

its worth it..

Raf, Watts that gauge on top of the dash, Level-Meter? :shrug :shrug :shrug

Allcruisen :imp :usa

Is it just me having trouble viewing the video??? :shrug

Raf, Watts that gauge on top of the dash, Level-Meter? :shrug :shrug :shrug

Allcruisen :imp :usa

that is the transmission temperature gauge.. got the pod on ebay.... now i can keep an eye on it so it doesnt blow up like it did 2 years ago this week.. :cry

blancobronco.... the video worked fine for me and chris.. is there something specific its doing?

I wonder if I should post more pics :brownbag

Blanco . . .if you have a slow computer like mine, use the pause button on the player to allow the video to down load before playing. I had to "pause" several times to get it to play smoothly. :thumbup

Now, I have waited till late in the game and just flipped thru the entire thread. As others have stated lots of good looking rigs. :rockon
-Crawler's bronc is awesome, especially for his age . . . wish my parents would have let me get a bronco
-Ox again awesome rig and I really dig those unimog axles to get so much ground clearence
-Zilla, awesome bronc again and love the coilovers and the video. Some very :uke: flex
-Gub Ni, awesome air in the '79 which persuades and calls for my attention

Well . . .my vote goes to Zilla. :thumbup
Early congrat's seem to be in order with your huge lead so here is mine :beer

To the others who were running, keep up the great work cause your broncs were very awesome in each of there own. It was truly a hard decision.

that is the transmission temperature gauge.. got the pod on ebay.... now i can keep an eye on it so it doesnt blow up like it did 2 years ago this week.. :cry

a.ka. an oh SHIT meter!