FOTM VOTE for Feb 2005 [Archive]

Crazedatwork

01-07-2005, 05:26 PM

Front lift install

http://www.supermotors.org/getfile/54067/fullsize/Front_lift_2.jpg
http://www.supermotors.org/getfile/54068/fullsize/8Picture_038.jpg
http://www.supermotors.org/getfile/54083/fullsize/20Tightening_them_up.jpg
http://www.supermotors.org/getfile/54087/fullsize/24Coming_together_001.jpg
http://www.supermotors.org/getfile/54088/fullsize/25Complete_front_with_rancho_9000.jpg
http://www.supermotors.org/getfile/54091/fullsize/2932_inch_tall_tire_on.jpg
http://www.supermotors.org/getfile/54095/fullsize/32-6_inches_higher_in_the_front.jpg

:thumbup

BikerPepe`

01-07-2005, 06:36 PM

Hey hey Crazed... slow down bud, don't blow your load before the first day! :twak

Then again... you are the guy that can single handedly choke SuperFord with all your pics, so what the hell! :drinkbud :histerica

AndyBronco

01-07-2005, 06:41 PM

http://www.fordtruckworld.com/gallery/AndyBronco/492837.jpg

testing out the suspension when i first got the bronco

http://www.fordtruckworld.com/gallery/AndyBronco/492836.jpg

first time wheelin afterwards

http://www.fordtruckworld.com/gallery/AndyBronco/501365.jpg

my fav pic from the badlands

Crazed

01-07-2005, 06:57 PM

:brownbag

Crazed

01-07-2005, 07:01 PM

Crazed

01-07-2005, 07:10 PM

Rear lift going in

http://www.supermotors.org/getfile/54096/fullsize/1Rear_before_the_lift.jpg
http://www.supermotors.org/getfile/54099/fullsize/rl4.jpg
http://www.supermotors.org/getfile/54101/fullsize/rl6.jpg
http://www.supermotors.org/getfile/54103/fullsize/rl8.jpg
http://www.supermotors.org/getfile/54104/fullsize/rl9.jpg

And my first time sitting on 35s
http://www.supermotors.org/getfile/54113/fullsize/rl18.jpg

:clap

Blown

01-07-2005, 07:38 PM

Blown, cause it is. Like my mind man! This was be a big project for my small mind: :wacko
http://www.supermotors.org/getfile/108067/fullsize/Dscn0576.jpg
Optimistic numbers out of Desktop dyno, torky at low RPM, it's there :rockon
http://www.supermotors.org/getfile/105254/original/Slide1.JPG

Blaze

01-07-2005, 11:55 PM

http://www.supermotors.org/getfile/62099/fullsize/MyRide-11.jpg

http://www.supermotors.org/getfile/62097/fullsize/MyRide-8.jpg

http://www.supermotors.org/getfile/100410/fullsize/Nov03#24.JPG

http://www.supermotors.org/getfile/100411/fullsize/Nov03#23.JPG

Blaze

01-07-2005, 11:57 PM

http://www.supermotors.org/getfile/78732/fullsize/PuddleJump2.JPG

http://www.supermotors.org/getfile/78733/fullsize/PlayinindaWater.JPG

http://www.supermotors.org/getfile/72747/fullsize/BlazePlayin1.jpg

http://www.supermotors.org/getfile/72571/fullsize/Jeremy_ShaneTrail.jpeg

Chris85xlt

01-08-2005, 03:11 AM

my vote goes to u Blown. Awsome rig and love that motor :thumbup

gearrat

01-08-2005, 03:16 AM

ok guys like y a had to ask but my vote goes to blaze.. gotta love that sticker on the rear bumper :rockon
http://www.supermotors.org/getfile/100411/fullsize/Nov03#23.JPG

Pony-boy

01-08-2005, 04:08 AM

Crazed got me.
The engine looks bad ass.
Oh and Tim has about 1500 pictures of that thing.
He needs a head start.

BlancoBronco

01-08-2005, 04:29 AM

I never vote on the 1st page..
theres still weeks of awsome pics to sway me.....

But damn Crazed sure seems to have alot dont he? :wacko

Crazed

01-08-2005, 09:49 AM

Cb setup, and power ports

http://www.supermotors.org/getfile/55839/fullsize/CB_move_3-14-03_012.jpg
http://www.supermotors.org/getfile/55841/fullsize/CB_move_3-14-03_016.jpg
http://www.supermotors.org/getfile/55838/fullsize/CB_move_3-14-03_008.jpg

:wacko

trey aka superbronco

01-08-2005, 10:34 AM

What's the deadline for the voting? I'm going to Huntsville on the 15th and hope to get some good pics there. Till then all I've got is the hood bling for now. I need to try and find the disc that i have my winch installation pics on it too. :rebelflag http://fullsizebronco.net/fsbimagehost/show.php/749/mvc-593s.jpg

trey aka superbronco

01-08-2005, 10:42 AM

For some of you that might not have seen my site before FTE deleted it! :boxing http://fullsizebronco.net/fsbimagehost/show.php/699/sblwtilt.jpg

Juice

01-08-2005, 10:55 AM

heres a few i have of built4wheelin from a winter run last year

http://www.michiganjeepers.com/photopost/data/500/1489built4wheelin1-med.jpg
http://www.michiganjeepers.com/photopost/data/500/1489built4wheelin2-med.jpg
http://www.michiganjeepers.com/photopost/data/500/1489built4wheelin3-med.jpg
http://www.supermotors.org/getfile/169242/fullsize/mjryan3.jpg
http://www.supermotors.org/getfile/169243/fullsize/mjryan4.jpg

i hope he doesn't think i'm a stalker or nothin, but his truck is fawkin cool. i've seen it out in the woods a couple times, and was just like wow, thats a bad ass truck. hopefully he pimps his shit

Blown

01-08-2005, 12:18 PM

my vote goes to u Blown. Awsome rig and love that motor :thumbup

Thank You!
This here is clyde at 13'000 feet in the Sangre De Christo mountains Colorado. This was July 13th, 2004 and I know I was the first to get past this snowfield to get to the top of the pass. :rockon There were no other tracks! It broke 100* in Pueblo Colorado where I live and was 63* at that altitude!
http://www.supermotors.org/getfile/134505/fullsize/DSCN0811.JPG

Blaze

01-08-2005, 04:45 PM

Hanging with the boys:
http://www.supermotors.org/getfile/100413/fullsize/TheBoys2.jpeg
Both of my babies!
http://www.supermotors.org/getfile/100412/fullsize/Sep03#03.JPG
Needing a bath:
http://www.supermotors.org/getfile/70436/fullsize/294555-R1-24A.jpg

crawler

01-08-2005, 06:08 PM

For anyone that isn't familiar with my bronco you can see the whole buildup in this link http://www.fullsizebronco.com/forum/showthread.php?t=22366
I will be posting plenty of more pictures, but it sucks because my internet connection has been done and I haven't been able to get on here.

BlueBronco

01-08-2005, 07:32 PM

For some of you that might not have seen my site before FTE deleted it! :boxing

I remember seeing over there. I thought I recognized the truck. It was disguised by the hood ornament.

Edit: I believe there to be at least 4 or 5 rigs in this that will eventually win FOTM so pass the pop corn.

Blown

01-08-2005, 07:54 PM

OK, ok I am known as "Blown" not just because of the blower. I've blown a motor, t-case, tranny, the pinion out the front of the 9" dropout case, the splines right the hell off of two 9" axles, a driveline, hubs, u-joints, a red light, and the worst thing, my mind. :wacko
Hey I build it, break it and fix it myself. :thumbup Why am I defending myself, you sound like my wife, knock it off! This is all I need, quit putting thoughts in my head, I come here for props dammit! :wacko :histerica (Blown)

Let it be known, that you vote "Blown"! :clap

http://www.supermotors.org/getfile/144443/fullsize/DSCN0896.JPG

BikerPepe`

01-09-2005, 03:27 AM

sorry Blown, Crazed, Blaze and everyone else... but I'm votin' for my nominee! :goodfinge

For some of you that might not have seen my site before FTE deleted it! :boxing http://fullsizebronco.net/fsbimagehost/show.php/699/sblwtilt.jpg
That sucks balls Trey... I remember checking out the whole build up, vids and all.
That rig of yours and the work you put into it are outstanding IMO and you definatly deserve FOTM to share that custom Bronco creation with the rest of the Bronco enthusiast world!
Do us all a favor and get the details and any pics you can recover on that build.
You have until the 25th... but don't let these guys run to far ahead of ya!

crawler

01-09-2005, 01:20 PM

My bronco the first day I started working on it.
http://www.supermotors.org/getfile/143773/fullsize/Scan10001.JPG
http://www.supermotors.org/getfile/143774/fullsize/Scan10003.JPG
http://www.supermotors.org/getfile/143775/fullsize/Scan10005.JPG
http://www.supermotors.org/getfile/143776/fullsize/Scan1.JPG
http://www.supermotors.org/getfile/143777/fullsize/Scan10002.JPG
http://www.supermotors.org/getfile/143778/fullsize/Scan10004.JPG

crawler

01-09-2005, 01:32 PM

Some of the nasty work I had to do to get it to look decent and work good cleanly
http://www.supermotors.org/getfile/143884/fullsize/Scan10007.JPG
http://www.supermotors.org/getfile/143892/fullsize/Scan10014.JPG
http://www.supermotors.org/getfile/143894/fullsize/Scan10016.JPG
http://www.supermotors.org/getfile/143895/fullsize/Scan10017.JPG
26 years of grease and dirt clean off with pressure washer
http://www.supermotors.org/getfile/143888/fullsize/Scan10011.JPG
Claened and sanded inner fenderwell
http://www.supermotors.org/getfile/143893/fullsize/Scan10015.JPG
After priming and painting
http://www.supermotors.org/getfile/143890/fullsize/Scan10013.JPG
The way the interior looked when I got it, so I decided to ditch it all
http://www.supermotors.org/getfile/143885/fullsize/Scan10008.JPG
Everything goes for custom stuff I will show later
http://www.supermotors.org/getfile/143886/fullsize/Scan10010.JPG
No door panels when I got it so I made some myself. I will show pics later
http://www.supermotors.org/getfile/143889/fullsize/Scan10012.JPG

crawler

01-09-2005, 01:44 PM

To solve the no door panel problem I made my own out of aluminum. Here how I did it
http://www.supermotors.org/getfile/159870/fullsize/Picture%20549.jpg
http://www.supermotors.org/getfile/159872/fullsize/Picture%20550.jpg
To roll the "bead" I used my dads bead roller
http://www.supermotors.org/getfile/159877/fullsize/Picture%20553.jpg
And what it does
http://www.supermotors.org/getfile/159875/fullsize/Picture%20552.jpg
What they look like after the bead has been rolled and the surface cleaned with aluminum cleaner
http://www.supermotors.org/getfile/159873/fullsize/Picture%20551.jpg
After sanding them for a nice finish
http://www.supermotors.org/getfile/166835/fullsize/Picture%20595.jpg
http://www.supermotors.org/getfile/166836/fullsize/Picture%20596.jpg
Before being screwed on
http://www.supermotors.org/getfile/146252/fullsize/l.jpg

Crazedatwork

01-09-2005, 04:12 PM

Hood scoop install

http://www.supermotors.org/getfile/56234/fullsize/Hood_scoop_005.jpg
http://www.supermotors.org/getfile/56237/fullsize/Hood_scoop_009.jpg
http://www.supermotors.org/getfile/56240/fullsize/Hood_scoop_014.jpg
http://www.supermotors.org/getfile/56247/fullsize/Hood_scoop_033.jpg

crawler

01-09-2005, 05:41 PM

This is why I tore out the old dash. I wanted Autometer Procomp gauges and I got them so I made the dash to fit in the rollcage
http://www.supermotors.org/getfile/140701/fullsize/Picture%20017.jpg
http://www.supermotors.org/getfile/140702/fullsize/Picture%20027.jpg
http://www.supermotors.org/getfile/140703/fullsize/Picture%20030.jpg
http://www.supermotors.org/getfile/140704/fullsize/Picture%20055.jpg
http://www.supermotors.org/getfile/144025/fullsize/Picture%20235.jpg
I have a stereo now just haven't installed it yet. Later this month :shrug
Aluminum cover pieces I made
http://www.supermotors.org/getfile/144027/fullsize/Picture%20236.jpg
Guage lights are pretty sweet
http://www.supermotors.org/getfile/144033/fullsize/Picture%20219.jpg
http://www.supermotors.org/getfile/144035/fullsize/Picture%20221.jpg
Most recent picture I have but I will be taking plenty more
http://www.supermotors.org/getfile/154595/fullsize/Picture%20398.jpg

DESTROYER

01-09-2005, 07:49 PM

Hey crawler we have all seen your build up 1000 times. It is awesome and you have done some great work, :thumbup

But Im sure I speak for most of us when I say lets see it in action!! :rockon :rockon

BlancoBronco

01-09-2005, 11:42 PM

Hey crawler we have all seen your build up 1000 times. It is awesome and you have done some great work, :thumbup

But Im sure I speak for most of us when I say lets see it in action!! :rockon :rockon

:stupid
Hey maybe you can get your dad to drive it?
I cant wait to finnally see that thing in action! :rockon

Blown

01-10-2005, 02:21 AM

http://www.supermotors.org/getfile/169555/fullsize/DSCN0229.JPG
http://www.supermotors.org/getfile/106794/fullsize/Dscn0228.jpg
These pics shows TTB can rock. :rockon No problem rolling over obstacle, "Jaws". You view a plaque describing a rollover death as you pass over this obstacle. A 7 on the pucker scale (it was made safer after the accident). Narrow right turn crawl up over rocks, off-camber - you get a nice lean down hill with a clear view to the bottom, with nothing to stop you from rolling down a rockslide 100 yards to the bottom of the valley. My wife got out here, 10+ on her pucker scale.
http://www.supermotors.org/getfile/169549/fullsize/DSCN0231.JPG
"Jaws II" about a 2 1/2' rise over 2 1/2', off-camber, but there was a tree there to stop the roll? Comforting.......a little anyway. More comfort in the bronc. You could hike/backpack this trail as fast as you could drive it, but we had all the good stuff in the bronc not on our backs. I'd rate it a 4, difficult and TTB did it! I'd rate a 4+ as one you could hike faster than wheel and where winching is necessary.
http://www.supermotors.org/getfile/125040/fullsize/rockin3.jpg
Little rocks with D44 SAS: "Viva Le Difference"! I noticed a huge inprovement for crawling. Said it before though, I miss TTB for "speed in the ruff".
Don't act like a clone :twak vote for blown! :clap :shrug

chambiec1

01-10-2005, 08:42 AM

I voted Blaze... for one, that's and awesome bronco. Second, he's got some courage running 38's on the TTB, and wheeling it!

Blown

01-10-2005, 02:05 PM

My Favorite mod fer crawlin these here Rocky Rocky;s:
http://www.supermotors.org/getfile/167082/fullsize/DSCN0913.JPG

http://www.supermotors.org/getfile/169623/fullsize/blownfsom.gif

Blown

01-10-2005, 02:05 PM

Dastardly double post, sorry :brownbag

83rustbucket

01-10-2005, 02:46 PM

I vote for Blown.

Are those first wheeling pics on Mt. Blanca? If not you need to go up there it is a great trail with great camping. Sorry for the interuption, Keep whoring.

Blaze

01-10-2005, 03:11 PM

Uh-oh!
I think I may be in trouble.....
http://www.supermotors.org/getfile/70437/fullsize/Stuck1.jpg

It's never as shallow as it seems! :banghead

http://www.supermotors.org/getfile/70438/fullsize/Stuck3.jpg

This mess cost me a engine AND a tranny!!

Crazedatwork

01-10-2005, 03:44 PM

From the shoot and run in TSF '02

http://www.supermotors.org/getfile/54146/fullsize/sr10from_Anne.jpg
http://www.supermotors.org/getfile/54148/fullsize/sr12.jpg
http://www.supermotors.org/getfile/54163/fullsize/sr29.jpg
http://www.supermotors.org/getfile/54164/fullsize/sr30.jpg
http://www.supermotors.org/getfile/54169/fullsize/sr38.jpg
http://www.supermotors.org/getfile/54179/fullsize/sr45.jpg

this was one of my first trips with a group...big fun :thumbup

Crazedatwork

01-10-2005, 03:51 PM

Todd and I went to play in TSF soon after...

http://www.supermotors.org/getfile/54194/fullsize/Rodgers_camp.....jpg
http://www.supermotors.org/getfile/54195/fullsize/I_like_my_truck..jpg
http://www.supermotors.org/getfile/54202/fullsize/Checking_flex.jpg
this flex here actually made my door hit the fender, ruining the side trim, so i pulled it soon after
http://www.supermotors.org/getfile/54204/fullsize/This_is_how_I_ganked_the_side_trim..jpg
http://www.supermotors.org/getfile/54212/fullsize/pull_harder!.jpg
http://www.supermotors.org/getfile/54213/fullsize/Back_at_camp..jpg

:rockon

Blown

01-10-2005, 04:18 PM

I vote for Blown.

Are those first wheeling pics on Mt. Blanca? If not you need to go up there it is a great trail with great camping. Sorry for the interuption, Keep whoring.

Yes, that is Blanca! Camped at 11,800" lake Como. Lake Comotose after a few margarita's, yes I have a blender and inverter for camping after the driving is done. Fished till we got tired of catching and releasing, 3 fish on one worm! :shocked Not as shocked as those watching me work the only full sized they ever saw go up there!
Beautiful! Cabin by the lake, 14,000" plus Bronca, I mean Blanca Peak in
the back ground.
http://www.supermotors.org/getfile/169653/fullsize/DSCN0242.JPG
Even more beautiful: :thumbup
http://www.supermotors.org/getfile/169656/fullsize/DSCN0236.JPG

Vote http://www.supermotors.org/getfile/169623/fullsize/blownfsom.gif and let it be known!

Pony-boy

01-10-2005, 05:21 PM

http://www.supermotors.org/getfile/70866/fullsize/Jun27#05.JPG

TSF 2003.

Crazedatwork

01-10-2005, 05:25 PM

Cool pic Howard!! thx

Blown

01-10-2005, 05:43 PM

http://www.supermotors.org/getfile/108084/fullsize/Dscn0045.jpg
Bikini and old paint. She's got some class! The rest of you, show some decency, and don't run completely topless! It was a showey truck I bought used for the great shape it was in, lack of use, and 5 spd. I designed the bikini using Kaylines front bow and etc. Spare tire rack didn't hold up to 35"ers for long
http://www.supermotors.org/getfile/72628/fullsize/alloff.jpg
I rattle-can painted over the bling, bling stripes, too bright, cause I put on standard doors to cut out that didn't match. Standard doors are less epensive and you don't have wires to run! I like em off completely too.
http://www.supermotors.org/getfile/142413/fullsize/DSCN0878.JPGCut it out!

Blaze

01-10-2005, 07:31 PM

http://www.supermotors.org/getfile/72590/fullsize/OntheTrail1.JPG

Vote for the rig, not the ugly fat ass dude!!!
http://www.supermotors.org/getfile/72768/fullsize/BlazePosing.jpg

Me and "the Legend".....
http://www.supermotors.org/getfile/140438/fullsize/Joe'sAirbags2.jpg

Calisa1969

01-10-2005, 08:32 PM

I guess I should share some pictures too. Here is a set from the rubicon, and a set of snow wheeling pics from Iron Mt. Road. My favorite is the one where we pulled out a snow cat. :thumbup http://www.supermotors.org/getfile/169798/fullsize/rubicon123.jpg

http://www.supermotors.org/getfile/169802/fullsize/snow123.jpg

jrdbronco

01-10-2005, 10:18 PM

voting for blaze because he's southern bretheren, and i love his rig

Blaze

01-10-2005, 10:19 PM

Thanks bro!! :thumbup
And thanks to those who've voted for me allready! :beer

mobronco93

01-11-2005, 09:12 AM

Damn, this is another tough month to pick.

Crazedatwork

01-11-2005, 03:47 PM

May of 02, returned to the mudhole Todd was pulled from in the last pics..

http://www.supermotors.org/getfile/54243/fullsize/tsa7.jpg
http://www.supermotors.org/getfile/54244/fullsize/tsa8.jpg
http://www.supermotors.org/getfile/54245/fullsize/tsa9.jpg
http://www.supermotors.org/getfile/54246/fullsize/tsa10.jpg
http://www.supermotors.org/getfile/54267/fullsize/tsa31.jpg
http://www.supermotors.org/getfile/54270/fullsize/tsa36.JPG http://www.supermotors.org/getfile/54271/fullsize/tsa37.JPG
http://www.supermotors.org/getfile/54274/fullsize/tsa39.JPG

yes clay is hard to clean off. :brownbag

Blown

01-11-2005, 05:47 PM

This was my old 84, Bessy. Bessy got scattered in the forest one day. A buck jumped out of the trees on the forest service road. I was whomping along at 45. I tried to turn slightly away and caught a rut which jerked me way over. I missed the buck but slammed an embankment which launched me barrel roll style back on the road. It was a terrifc impact hitting that embankment! I remember hitting it but didn't wake-up till I was slowly rolling down the road. It must have been a slighlty unweighted barrel roll that took about fifty feet to complete by the look of the scars in the dirt. I was picked up five minute later by some forest service guy, was home in ten, and sent a flatbed out to pic her up. Totalled! :cry I took the salvage and moved everthing over I could to the 90. The roll bar saved my head and a brand new ARB bull bar was wrecked. I should have slammed that buck! I have slowed down. This was a track in volcanic cinders with whoops, two jumps, and killer burms. A track which you jumped twice each time around and she held up! Set-up with 33X12.5 claws, 6" springs all the way around, and Rancho Arms. I did have all the easy weight of off her and cut out doors.
http://www.supermotors.org/getfile/72724/fullsize/airbronco.jpg

Crazed

01-11-2005, 06:43 PM

One of my favorite series of pics...this was Ravens Roost...broncofest '02 day 2

http://www.supermotors.org/getfile/54363/fullsize/broncofest_2002_065.jpg
http://www.supermotors.org/getfile/54364/fullsize/broncofest_2002_066.jpg
http://www.supermotors.org/getfile/54365/fullsize/broncofest_2002_067.jpg
http://www.supermotors.org/getfile/54366/fullsize/broncofest_2002_068.jpg http://www.supermotors.org/getfile/54370/fullsize/broncofest_2002_072.jpg
http://www.supermotors.org/getfile/54371/fullsize/broncofest_2002_073.jpg
http://www.supermotors.org/getfile/54373/fullsize/broncofest_2002_075.jpg
http://www.supermotors.org/getfile/54374/fullsize/broncofest_2002_076.jpg
http://www.supermotors.org/getfile/54375/fullsize/broncofest_2002_078.jpg
http://www.supermotors.org/getfile/54376/fullsize/broncofest_2002_079.jpg
http://www.supermotors.org/getfile/54377/fullsize/broncofest_2002_080.jpg
:rockon

Crazed

01-11-2005, 06:49 PM

http://www.supermotors.org/getfile/54399/fullsize/broncofest_2002_102.jpg
http://www.supermotors.org/getfile/54406/fullsize/broncofest_2002_109.jpg
http://www.supermotors.org/getfile/54408/fullsize/broncofest_2002_111.jpg
http://www.supermotors.org/getfile/54415/fullsize/broncofest_2002_118.jpg
http://www.supermotors.org/getfile/54416/fullsize/broncofest_2002_119.jpg
http://www.supermotors.org/getfile/54420/fullsize/broncofest_2002_123.jpg
:chili:

mobronco93

01-11-2005, 07:20 PM

I think Crazed walks around 24/7 with a camera around his neck just waitin to take a pic...damn. :shrug

BigNorm

01-11-2005, 08:39 PM

My vote goes to Blown this month. He's one hell of a nice guy and has done alot of cool stuff to his truck. :thumbup

BUCKIN' GA DAWG

01-11-2005, 10:24 PM

Got to go with my Bro' BLAZE! Southern Born & Southern Breed! Also one DAMN FINE wheeler! Besides, anybody that use to live in Mt.Zion GA has got to be DA' MAN! Good Luck BRO' Hope to see you soon!

coldsteel1993

01-11-2005, 10:59 PM

Love the rig and he's got some really cool wheelin' pics.

crawler

01-12-2005, 12:46 AM

Do I need to have wheeling pics to be a contender? I have a lot of pics on things I've done but can't go wheeling because my bronco not registered and I don't have my license.

Dave's Bronc 90

01-12-2005, 01:00 AM

Crawler, I love that dash. Super simple, clean lines, just like I'd want mine if I was gutting the interior to do a full on custom. :thumbup

But having said that, my heart's still in Dixie, and my votes gotta go to Blaze.:rockon I really like that one pic with the water up just under the doors. I hate to think where that water would be in my truck on 33's! Maybe this would be a good time to extend my vent lines...

Blown

01-12-2005, 04:44 AM

My vote goes to Blown this month. He's one hell of a nice guy and has done alot of cool stuff to his truck. :thumbup

Damn nice of you Norm, thanks!

BlueBronco

01-12-2005, 09:21 AM

My heart will always be in Dixie. While Blaze has an excellent rig, I went with Blowns Blown SASed '90 Bronco that climbed Mt Bronca. The top 5 rigs if not more will eventually win this. Good luck to all.

allcruisen

01-12-2005, 10:12 AM

With over 5000 members and we only have 50 VOTES?

Come-on folks, LETS GET PIMPIN' LETS GET THEM PICTURES.....:thumbup

Allcruisen :imp :usa

mobronco93

01-12-2005, 10:12 AM

Voted for Blown.

BlueBronco

01-12-2005, 10:48 AM

Good god, AllCruisen! Don't instigate Crazed to post pics any faster. Joe has been having problem with the site because Crazed has been drawing all the band width with this thread!! :toothless :drinkbud

mobronco93

01-12-2005, 10:52 AM

Crazed should see about a sponsorship from his camera maker. Crazed is showing just how much abuse it can take. :thumbup

Calisa1969

01-12-2005, 11:59 AM

more pics :goodfinge

http://www.supermotors.org/getfile/161231/fullsize/DSC03063.JPG
http://www.supermotors.org/getfile/144147/fullsize/DSC02352.JPG
http://www.supermotors.org/getfile/153774/fullsize/DSC02757.JPG
http://www.supermotors.org/getfile/153775/fullsize/DSC02775.JPG

Blaze

01-12-2005, 12:16 PM

Thanks for the support every one..:beer

More pics to come...(gotta pace my self, there's still a long way to go and I'm not much of a pic. taker...)

Crazedatwork

01-12-2005, 01:13 PM

Rock lights

http://www.supermotors.org/getfile/70707/fullsize/More%20rock%20lights%20009.jpg
http://www.supermotors.org/getfile/90812/fullsize/Rock%20lights%20003.jpg
underhood lights
http://www.supermotors.org/getfile/90813/fullsize/Rock%20lights%20008.jpg
http://www.supermotors.org/getfile/90814/fullsize/Rock%20lights%20007.jpg

:clap

jackhart

01-12-2005, 01:16 PM

Blaze - i didn't see that rig at witc...damn bro! :thumbup

Crazed and Blown are also contenders for my vote right now...but i gotta see more pix before i throw my vote down.

cuda_killa

01-12-2005, 02:06 PM

awesome rigs so far,
but i to must see more pics before i can cast my all important vote

Blaze

01-12-2005, 03:07 PM

Blaze - i didn't see that rig at witc...damn bro! :thumbup

Yeah my other rig is the one I beat on...I wheeled the Beast pretty hard but decided to go on a search for a dedicated trailrig before I screwed up my '95 too bad. I retired it to pavemnet pounder/head turner, and I went out and found the '94 and that's what you saw....it gets the SAS, lockers, full cage etc...

Blown

01-12-2005, 03:26 PM

Beard seats
http://www.supermotors.org/getfile/108085/fullsize/beard%20seat%20and%20stuff.jpg

Crazedatwork

01-12-2005, 03:43 PM

Todds ravens roost pics

http://www.supermotors.org/getfile/55520/fullsize/Broncofest_2002_day_2_from_Todd.jpg
http://www.supermotors.org/getfile/55521/fullsize/Broncofest_2002_day_2_from_Todd_001.jpg
http://www.supermotors.org/getfile/55523/fullsize/Broncofest_2002_day_2_from_Todd_003.jpg
http://www.supermotors.org/getfile/55525/fullsize/Broncofest_2002_day_2_from_Todd_005.jpg
http://www.supermotors.org/getfile/55534/fullsize/Broncofest_2002_day_2_from_Todd_015.jpg
http://www.supermotors.org/getfile/55535/fullsize/Broncofest_2002_day_2_from_Todd_016.jpg
http://www.supermotors.org/getfile/55536/fullsize/Broncofest_2002_day_2_from_Todd_017.jpg

At the top with my lunch
http://www.supermotors.org/getfile/55549/fullsize/Broncofest_2002_day_2_from_Todd_031.jpg

:shocked

Blaze

01-12-2005, 07:11 PM

Dixie M&G pic:
http://www.supermotors.org/getfile/118240/fullsize/P4170009.JPG
(I'm the ugly long haired dude in the cowboy hat :brownbag)

Pulling Jermil01 out of a hole:
http://www.supermotors.org/getfile/70663/fullsize/gettingpulledout2.jpeg

In the begining:
http://www.supermotors.org/getfile/62089/fullsize/MyRide-4.jpg

Posing with Ogeechee:
http://www.supermotors.org/getfile/72542/fullsize/Shane_Jon.jpeg

Cruising through the swamp:
http://www.supermotors.org/getfile/72590/fullsize/OntheTrail1.JPG

Blown

01-12-2005, 07:19 PM

Funny what you can pick up along the way:
http://www.supermotors.org/getfile/170068/fullsize/DSCN0239.JPG

Grand scale, see that little jeep in the middle? Blanca
http://www.supermotors.org/getfile/170066/fullsize/DSCN0245.JPG

Somewhere in the Rockies, shssssss! It's a secret spot with creek, waterfall, beaver, trout, bear, etc. etc. etc.
http://www.supermotors.org/getfile/106795/fullsize/Dscn0348.jpg

AndyBronco

01-12-2005, 07:50 PM

http://www.fordtruckworld.com/gallery/AndyBronco/501367.jpg
how to fix body damage
http://www.fordtruckworld.com/gallery/AndyBronco/501368.jpg
more how to fix body damage
http://www.fordtruckworld.com/gallery/AndyBronco/501366.jpg
yes the hill that my rocker panel got destroyed on. :duh
http://www.fordtruckworld.com/gallery/AndyBronco/492839.jpg
mine and toddacimer's truck
http://www.fordtruckworld.com/gallery/AndyBronco/492841.jpg
testing the flex stock and when i got it

chambiec1

01-12-2005, 07:58 PM

Great pics guys... but I voted for Blaze(I love the rig)
We need more votes!!! :boxing :twak :slap

Crazedatwork

01-13-2005, 01:17 PM

Broncofest 2002 funny/moon rocks

http://www.supermotors.org/getfile/54446/fullsize/broncofest_2002_133.jpg
http://www.supermotors.org/getfile/54448/fullsize/broncofest_2002_135.jpg
http://www.supermotors.org/getfile/54456/fullsize/DCP_2878.jpg
http://www.supermotors.org/getfile/54457/fullsize/DCP_2879.jpg
http://www.supermotors.org/getfile/54459/fullsize/broncofest_2002_144.jpg
http://www.supermotors.org/getfile/54464/fullsize/broncofest_2002_149.jpg

:thumbup

allcruisen

01-13-2005, 03:49 PM

OK, THEESE MEMBERS DESERVE MORE THEN JUST 58 VOTES.....COME ON PEOPLE, LETS GET PIMPMIN :imp

Hey, I Nominated him and I dont think he has thees picturs? :twak

http://www.supermotors.org/getfile/170204/fullsize/FOTM.JPG
http://www.superford.org/getfile/170205/fullsize/FOTM1.JPG
http://www.superford.org/getfile/170206/fullsize/FOTM2.JPG
http://www.superford.org/getfile/170207/fullsize/FOTM3.JPG
http://www.superford.org/getfile/170208/fullsize/FOTM4.JPG
http://www.superford.org/getfile/170209/fullsize/FOTM5.JPG

Good Luck too all :thumbup

Allcruisen :imp :usa

Crazedatwork

01-13-2005, 03:49 PM

Another trip to tsf 8/03

http://www.supermotors.org/getfile/54495/fullsize/Drags_and_sunday_wheelin_040.jpg
http://www.supermotors.org/getfile/54501/fullsize/Drags_and_sunday_wheelin_053.jpg
http://www.supermotors.org/getfile/54517/fullsize/Drags_and_sunday_wheelin_077.jpg
http://www.supermotors.org/getfile/54518/fullsize/Drags_and_sunday_wheelin_078.jpg
http://www.supermotors.org/getfile/54527/fullsize/Drags_and_sunday_wheelin_091.jpg
http://www.supermotors.org/getfile/54529/fullsize/Drags_and_sunday_wheelin_093.jpg
http://www.supermotors.org/getfile/54539/fullsize/Drags_and_sunday_wheelin_106.jpg
http://www.supermotors.org/getfile/54548/fullsize/Drags_and_sunday_wheelin_115.jpg
http://www.supermotors.org/getfile/54549/fullsize/Drags_and_sunday_wheelin_116.jpg

:chili:

Juice

01-13-2005, 07:46 PM

You guys need to check out built4wheelins rig. heres his website Clicky (http://bronco694.tripod.com/)
more recnet page CLICK (http://built4crawlin.tripod.com/)
http://built4crawlin.tripod.com//sitebuildercontent/sitebuilderpictures/pb220249.jpg
http://built4crawlin.tripod.com//sitebuildercontent/sitebuilderpictures/aaa12.jpg

check him out, this is rig is serious.

Edit:sorry about the size, i took the pics from his site, not sure how to resize them from an internet source, if a mod knows how feel free

jrdbronco

01-13-2005, 07:55 PM

hey crazed, why is your hood popped in the 1st set of pics on this page? trying to keep the motor cooled?

Crazed

01-13-2005, 08:27 PM

It was warm up there that day....most did it just to add some air...

hoodscoop takes care of all that now..

http://www.supermotors.org/getfile/135965/fullsize/DSC00287.JPG
:brownbag

MudMad

01-13-2005, 10:52 PM

Crazed you had me HELLO. Then I saw your pics, totally awesome rig. Then I had to be fair and check all of the contestants. With all of the pics it was tough. I then was going to vote for blown, as I love what he has done and he camps where I'd like to go, somewhere in the Rockies. But then there's Blaze. Totally sweet looking ride. But the clincher for me was I saw pics of Crazed w/kids in the back seat w/NO Rollcage. I'm a safety nut, and with all of the rollovers lately I just couldn't vote for the safety of kids not being upheld. It was really tough, but I had to vote for Blaze, the front windshield says it all, and of course the rear sticker is the truth. Besides, did you look at his pic. Damn, w/as ugly as he is he must need friends, so I'm trying to help you out bro. Just kidding. I'm sure that whoever doesn't win this month will win one of the months coming up. Good luck to all, and keep building the best rigs anywhere.

Crazed

01-13-2005, 11:36 PM

:cry

Blown

01-14-2005, 12:24 PM

My latest project after blowing up a stock 9" case fixing it then stripping the splines off an axle. :

True Hi9 High pinion, nodular case, daytona pinion support, and ring thrust block:
http://www.supermotors.org/getfile/167733/fullsize/DSCN0920.JPG
http://www.supermotors.org/getfile/167735/fullsize/DSCN0922.JPG
Up tight and outasite! It moves the pinion 2 1/2" above midline and 1" higher than any other pinion:
http://www.supermotors.org/getfile/167741/fullsize/DSCN0919.JPG

I have removed the track bar and need to rework it t get it up put of the way. I plan to remove the truss from below and put it on top, move the shock mounts up, and shave the diff! That's 1 1/2" better than a 60 Like so:
http://www.supermotors.org/getfile/170387/fullsize/shaved%209.jpg

Ogeechee 4x4

01-14-2005, 12:39 PM

great pics y'all---keep 'em coming :thumbup :rockon

Crazedatwork

01-14-2005, 01:13 PM

Nah..my pics are unsafe...think ill stop now.

tntbronco

01-14-2005, 01:52 PM

But the clincher for me was I saw pics of Crazed w/kids in the back seat w/NO Rollcage. I'm a safety nut, and with all of the rollovers lately I just couldn't vote for the safety of kids not being upheld.
:twak You always have one holier than thou that thinks he knows what is best. F,im get those pics rolling.:rockon

DESTROYER

01-14-2005, 03:23 PM

Crazedatwork

01-14-2005, 03:34 PM

lol one of those kids was yours Todd!!

Blaze

01-14-2005, 05:05 PM

Damn, w/as ugly as he is he must need friends
Aint that the truth! :brownbag

:toothless

Blown

01-14-2005, 05:53 PM

High pinion 9" :rockon how much did that cost you.

Uhhhhhhh, well, not to much, ahhhhh, it was under $2,200. :shocked

Blown

01-14-2005, 06:38 PM

http://www.supermotors.org/getfile/135772/fullsize/DSCN0800.JPG
I cut the rear quarters up to the tailgate which take out much of the heavy corner post, gave away the stock bumper, welded up the bumper out of 2X2X1/4", the gas tank skid is doubled. two stock skids, 1/8" plate sides, framed in angle which is bolted up to the bumper so as to slide off stuff. I bought Smittybuilts roll bar and cage kit and added the rear most bar which I bent myself. I bent it too wide and still need to sleeve where I cut it and rewelded it. You can't see all of the drop hitch but it doubles as a step, keeps pesky ricers out from under, and is removable for the trail. The receiver is 2X2 square gusseted and welded between the frame rails. Notice the shackle flip and beefed shackles. And finally the Ridgerunners sticker! Out website is here: http://www.ridgerunners4x4.com/
The pic below shows the hitch and bling bling exhaust tip. The tip is 1/2 a glass pack I C-clamped on to reduce sound around town and push the exhaust away. Two nuts loosened and it's off for the trail. The tail gate is gutted and cut out on the inside, saving 80lbs. The rear window is tinted lexan siliconed in the shell and clamped to the tailgate. The soft top goes on spring through fall, saving another 120lbs. The shell is only for winter.
http://www.supermotors.org/getfile/155036/fullsize/DSCN0903.JPG

OL' HANK

01-14-2005, 06:39 PM

Man some sweet rigs this month. Gonna have to hold off a little to see more pics. It's narrowed down to 4 which still don't help me out much. So come on now lets see more pics.

Juice

01-14-2005, 09:11 PM

I think i'm gonna be late for work tomarrow so i can go out and get some pics of Built4wheelin, he is in town and goin on the run tomarrow. hopefully it'l be above 0!

dhath

01-14-2005, 10:11 PM

It was a tough choice, I have looked through all the pics and mods!! Boy was this hard a month to pick''em :banghead :banghead

Crazed you got my VOTE!!!!!! :chili: :chili: :chili: :chili:

Sweet Rig and definately used!! :thumbup :thumbup :thumbup

Crazed

01-15-2005, 03:08 AM

Thanks man, i appreciate it

Blown

01-15-2005, 10:18 AM

Damn! Blaze is running away with this! :cry Congratulations MoFo! :thumbup This does not mean I'll stop the pic whoring of my favorite toy and pride I have in building it. Hell, it's an honor to be nominated. :beer
http://www.supermotors.org/getfile/134498/fullsize/DSCN0804.JPG
I wanted lower F'n gearing The Atlas II 3.8:1 was my choice as the 1356 was acting-up. I actually had to have the rear driveline lengthened rather than shortened as with a Klune or two t-cases. Now I have a gear driven, bullet proof t-case.
http://www.supermotors.org/getfile/134498/fullsize/DSCN0804.JPG
Site tube for oil level, inline vss sensor, and short adapter cable

BlancoBronco

01-15-2005, 12:47 PM

Crazedatwork

01-15-2005, 01:10 PM

Ready for another day of wheelin?

http://www.supermotors.org/getfile/54551/fullsize/weekday_wheelin_004.jpg
http://www.supermotors.org/getfile/54555/fullsize/weekday_wheelin_008.jpg
http://www.supermotors.org/getfile/54576/fullsize/weekday_wheelin_034.jpg
http://www.supermotors.org/getfile/54588/fullsize/weekday_wheelin_046.jpg
http://www.supermotors.org/getfile/54589/fullsize/weekday_wheelin_047.jpg
http://www.supermotors.org/getfile/54605/fullsize/weekday_wheelin_064.jpg
http://www.supermotors.org/getfile/54606/fullsize/weekday_wheelin_065.jpg
http://www.supermotors.org/getfile/54607/fullsize/weekday_wheelin_066.jpg

:hump

DESTROYER

01-15-2005, 01:21 PM

I voted blown, Because even the baddest looking rig ant sh*t if it don't have the drive train to back it up, and blown does from blown and stroked engine, to 5 speed trany to Atlas II tcase to ARB locked hp axles.

Crazed

01-15-2005, 02:12 PM

Crazed

01-15-2005, 02:43 PM

4x4 Wars

http://www.supermotors.org/getfile/54667/fullsize/4x4_wars_10-12-02_031.jpg
staged for the drags
http://www.supermotors.org/getfile/54698/fullsize/4x4_wars_10-12-02_064.jpg
http://www.supermotors.org/getfile/54699/fullsize/4x4_wars_10-12-02_065.jpg
http://www.supermotors.org/getfile/54700/fullsize/4x4_wars_10-12-02_066.jpg
http://www.supermotors.org/getfile/54705/fullsize/4x4_wars_10-12-02_071.jpg
http://www.supermotors.org/getfile/54706/fullsize/4x4_wars_10-12-02_072.jpg
http://www.supermotors.org/getfile/54707/fullsize/4x4_wars_10-12-02_073.jpg
http://www.supermotors.org/getfile/54723/fullsize/4x4_wars_10-12-02_092.jpg

:rockon

Crazed

01-15-2005, 02:53 PM

Day 2

http://www.supermotors.org/getfile/54775/fullsize/4x4_wars_10-13-02_016.jpg
http://www.supermotors.org/getfile/54809/fullsize/4x4_wars_10-13-02_067.jpg
http://www.supermotors.org/getfile/54812/fullsize/4x4_wars_10-13-02_071.jpg

Now for the obstacle course

http://www.supermotors.org/getfile/54833/fullsize/4x4_wars_10-13-02_096.jpg
http://www.supermotors.org/getfile/54834/fullsize/4x4_wars_10-13-02_097.jpg
http://www.supermotors.org/getfile/54835/fullsize/4x4_wars_10-13-02_098.jpg
http://www.supermotors.org/getfile/54836/fullsize/4x4_wars_10-13-02_099.jpg
http://www.supermotors.org/getfile/54837/fullsize/4x4_wars_10-13-02_100.jpg
http://www.supermotors.org/getfile/54839/fullsize/4x4_wars_10-13-02_102.jpg

the course was way harder than it looked...designed my a crazy person.

Blaze

01-15-2005, 03:08 PM

Well Blaze i guess our trucks ant Sh*t
Did we ever claim they were??? :toothless

BlueBronco

01-15-2005, 03:12 PM

What else you got there to impress me with blown? :shrug

How did you miss the SAS, Beard seats, cage, bikini top, and cutout doors?

DESTROYER

01-15-2005, 05:23 PM

Well Blaze i guess our trucks ant Sh*t

I wasn't applying to you or blaze or any one specifically for that mater, all I was saying is that you see bad a$$ truck all the time huge lift huge tires, then when you take a closer look it has little axles, little motor, and it can barely move the truck, let alone wheel it. I see it alot where I'm from especially with the jeeps, But you and everybody else on there has a pretty stout drive train (built ford tough) But Blowns is pretty much bullet prof, He has what most of us could only dream of having. Anyway if I offended you I'm sorry.
And if it counts my second chose would have been you or blaze. :rockon

jackhart

01-15-2005, 08:22 PM

i know which direction i'm leaning, but i still need a few more pix before i make up my mind for sure... :thumbup

Blown

01-15-2005, 08:36 PM

Thanks Destroyer! Weak link is the Dana 44, but I got plans there if I start busting it regularly and I want to go with 39.5's.

More stuff, If you have not checked this out please do:
http://fordfuelinjection.com/bronco/engine/blown.html

http://www.supermotors.org/getfile/108058/fullsize/Dscn0545.jpg
I matched the intake to 70mm acufab throttlebody. Flow baby flow!
http://www.supermotors.org/getfile/108059/fullsize/Dscn0549.jpg
Upper/plenum opened up.
http://www.supermotors.org/getfile/108060/fullsize/Dscn0558.jpg
Lower opened up.
http://www.supermotors.org/getfile/108061/fullsize/Dscn0560.jpg
Matched to Roush heads (200cc intake runners, 2.02 intake & 1.60 exh.)
http://www.supermotors.org/getfile/105196/fullsize/ForgedKit.jpg
Details on build:
302 stroked/bored at 0.40 over to 349, Powerdyne blower at 9lbs., Scat 9000 crank, Scat Forged H beam rods, Probe forged dished pistons 9:1 compression, Total Seal plasma moly file fit rings, Clevite 77 Trimetal P-Series Race Engine Bearings, World Products Roush heads (200cc int. run 2.02int 1.60exh.), Crane roller cam 364215 (Lobe center 112, duration 260int 270exh .445int & .470ex) Comps Rollin' rockers, Mass air conversion, A3M1 Mustang computer, Ford Racing 70mm high flow MAF to their 30lb inj., Edelbrock performer Mustang intake, AccuFab 70mm throttle body, K&N filter, BBK in-line 50gph fuel pump, JBA Shorties, "Y" pipe 3" single exhaust, IMCO muffler, TwEECer tuned A3M1 fo engine management.

Blown

01-15-2005, 08:50 PM

I would'nt know being I hav'nt voted yet...
But I gotta say Damn, "Blown" Has really got some sweet parts on his rig! :thumbup
I can only Imagine what he's got invested in it. :wacko

I mean let see a parts run down that I know of is...
Blower
atlas II transfer case
Bad ass 9" rear end.

& it looks like some sweet skid plate here & there.

What else you got there to impress me with blown? :shrug

I aint votin yet, But .............................

I'll keep posting up. I enjoy working on it as much as wheeling it. This is my "one thing" that I blow on. I afford it by driving a 91 Exploder most of the time. I work on both the bronc and exploder to maintain them and it saves me cash.

Crazed

01-15-2005, 10:24 PM

Anyway if I offended you I'm sorry.

Hey no biggie man...just seems alot of people are pretty negative lately, not just in this thread but all over the place..

(and you are right, blowns rig has some shit on it!!)

trey aka superbronco

01-15-2005, 10:28 PM

Here's some pics we shot todayhttp://texasfourwheelers.com/photos/Liberty1.JPG http://texasfourwheelers.com/photos/Liberty2.JPG http://texasfourwheelers.com/photos/Liberty3.JPG

Blaze

01-15-2005, 10:51 PM

God I love Trey's rig! :rockon

Anyway if I offended you I'm sorry.
No offense taken here..:shrug

trey aka superbronco

01-15-2005, 10:54 PM

more SB pimpin http://texasfourwheelers.com/photos/Liberty4.JPG http://texasfourwheelers.com/photos/Liberty5.JPG http://texasfourwheelers.com/photos/Liberty6.JPG :rebelflag http://texasfourwheelers.com/photos/Liberty9.JPG

trey aka superbronco

01-15-2005, 10:58 PM

I meant to take some new pic's of the Mickey Thompson Classic II's I put on her Friday, I'll post some before and after clean-up pics tomorrow. In the previous pics you can see the Ramsey IPH8000 I finally got installed. We used the crap out of it today! :rebelflag

BlueBronco

01-15-2005, 11:33 PM

Trey, where'd the hood ornaments go? :toothless

trey aka superbronco

01-15-2005, 11:36 PM

Trey, where'd the hood ornaments go? :toothless
Miss Tammi wouldn't let me keep them! :shrug but they do deserve a second look! http://fullsizebronco.net/fsbimagehost/show.php/749/mvc-593s.jpg :rebelflag

90custom

01-16-2005, 12:14 AM

Well Blaze has mine, its a sweet rig, the right color, just a beautiful thing to see and I would just like to wish you the best. Great work man!! :drinkbud :goodfinge

Good luck :rockon :beer

BlancoBronco

01-16-2005, 04:05 AM

How did you miss the SAS, Beard seats, cage, bikini top, and cutout doors?

I not going to say anything negitive about any of this months contestants because They are all pretty cool....
But I'm a TTB guy :wacko , So the SAS does nothing for me!
& I like my cage better!
That bikini top is pretty cool :rockon
& yes I will probably one day buy seats kinda like those.... :thumbup
& oh yeah ....How did I forget about the doors! :rockon

I was just wondering if there was some stuff I hav'nt seen like his transfer case thats cool!
& That new rear axle is so SAWEEET!
& his skid plates look great..I dont remember seeing those before. :clap
& I dont know who built his engine for him, But those parts are probably some of the best on any of the FSB guys rigs.

But i gotta ask you "blown"
Did you port those parts your self?
I spent many years porting & polishing cylinder heads & etc
During my 1st career as a custom engine machinist. :cool:

Blown

01-16-2005, 10:08 AM

Blown

01-16-2005, 10:23 AM

BlancoBronc: I was very lucky to find that Edlebrock manifold on E-bay. All I opened up was at the throttle body, everthing else matched! It came with the phenolicspacer. It was needed to clear the fuel regulator and PCV.

How do yo hook up 400+ ftlbs of torque? Centramatic II clutch!
http://www.supermotors.org/getfile/108063/fullsize/Dscn0554.jpg
Centerforce II clutch. I has a wider contact area on the clutch disk to utilize all the surface area on the fly wheel.
http://www.supermotors.org/getfile/108064/fullsize/Dscn0555.jpg
Pressure plate! Supposed to be 60% better holding capability. Notice the weights in the center. Centrifugal force presses them out as it spins and increases holding power.
http://www.supermotors.org/getfile/108062/fullsize/Dscn0551.jpg
Flywheel balanced to New stroker rotating assembly. Large holes drilled to remove material and plugz added on the opposite side.

Crazedatwork

01-16-2005, 11:10 AM

http://www.supermotors.org/getfile/54926/fullsize/Jeep_shakedown_040.jpg
http://www.supermotors.org/getfile/54929/fullsize/Jeep_shakedown_044.jpg
http://www.supermotors.org/getfile/54931/fullsize/Jeep_shakedown_046.jpg
http://www.supermotors.org/getfile/54943/fullsize/Jeep_shakedown_059.jpg
http://www.supermotors.org/getfile/54946/fullsize/Jeep_shakedown_069.jpg
http://www.supermotors.org/getfile/54962/fullsize/Jeep_shakedown_086.jpg
http://www.supermotors.org/getfile/54964/fullsize/Jeep_shakedown_088.jpg
Very close to a rollover here...back tire is in a hole that i didnt see..
http://www.supermotors.org/getfile/54966/fullsize/Jeep_shakedown_090.jpg
http://www.supermotors.org/getfile/54967/fullsize/Jeep_shakedown_091.jpg
:rockon

Andrewdrice

01-16-2005, 12:40 PM

where is everybody???? There are only like 4 people pimpin pics this month. I wanna see more pics so that I can make an informed descision!

Blaze

01-16-2005, 01:01 PM

My rig and my mutt...
http://www.supermotors.org/getfile/170757/fullsize/Mutt1.jpg
My rig and Gearheads lovely wife Angel (forground):
http://www.supermotors.org/getfile/72549/fullsize/FollowtheBlazer3.jpg
Me and Gearhead working on my junk:
http://www.supermotors.org/getfile/72594/fullsize/ShaneTrailFix1.jpeg
Following Jermil01 to more mischief:
http://www.supermotors.org/getfile/72571/fullsize/Jeremy_ShaneTrail.jpeg

Crazedatwork

01-16-2005, 01:12 PM

http://www.supermotors.org/getfile/55225/fullsize/Christmas_tree_run_2002_040.jpg
http://www.supermotors.org/getfile/55261/fullsize/Christmas_tree_run_2002_152.jpg
http://www.supermotors.org/getfile/55265/fullsize/Christmas_tree_run_2002_156.jpg
http://www.supermotors.org/getfile/55266/fullsize/Christmas_tree_run_2002_157.jpg
http://www.supermotors.org/getfile/55272/fullsize/Christmas_tree_run_2002_164.jpg
http://www.supermotors.org/getfile/55270/fullsize/Christmas_tree_run_2002_162.jpg
http://www.supermotors.org/getfile/55282/fullsize/Christmas_tree_run_2002_177.jpg
http://www.supermotors.org/getfile/55284/fullsize/Christmas_tree_run_2002_179.jpg
http://www.supermotors.org/getfile/55285/fullsize/Christmas_tree_run_2002_180.jpg
http://www.supermotors.org/getfile/55292/fullsize/Christmas_tree_run_2002_196.jpg
:santa

Mels

01-16-2005, 01:19 PM

Hmm..I'm torn between voting for one of mah boys - Crazed or Blaze - or voting for someone new like Blown or CaLisa the girlie.

Decisions Decisions. :toothless

BlueBronco

01-16-2005, 01:21 PM

I not going to say anything negitive about any of this months contestants because They are all pretty cool....
:thumbup There are several very good Broncos in this thing.

But I'm a TTB guy :wacko , So the SAS does nothing for me!

The axle shafts in your bling bling ttb won't do anything for you either.

& I like my cage better!

I always give the advantage in voting tie breaker to the guy who does his own work. Blown lifted his ttb himself, did his own SAS, supercharge, engine buildup, and rear axle stuff, not to mention the tcase install, the doors, the bikini top.

That's my logic in picking Blowns rig this month. I definately have a lot of respect for what Trey did with that rig as well as Blaze, Crazed, Built4Wheelin, and the young pup Crawler. I think all these guys and gals will eventually win this thing. :rockon

Edit: I like to visualize a head to head of the contestants in these things taking into account the rig, the builder, the driver, and the demeanor of the driver rig combination. :drinkbud

trey aka superbronco

01-16-2005, 01:33 PM

:thumbup
I like to visualize a head to head of the contestants in these things taking into account the rig, the builder, the driver, and the demeanor of the driver rig combination. :drinkbud

Demeanor? I haven't got a demean bone in my body! :chili:

Crazed

01-16-2005, 03:56 PM

Another trip to TSF and firebreak 5

http://www.supermotors.org/getfile/55316/fullsize/1-4-03_019.jpg
http://www.supermotors.org/getfile/55320/fullsize/1-4-03_026.jpg
http://www.supermotors.org/getfile/55321/fullsize/1-4-03_037.jpg
http://www.supermotors.org/getfile/55336/fullsize/1-4-03_105.jpg
http://www.supermotors.org/getfile/55338/fullsize/1-4-03_119.jpg
http://www.supermotors.org/getfile/55340/fullsize/1-4-03_131.jpg
http://www.supermotors.org/getfile/55341/fullsize/1-4-03_134.jpg
http://www.supermotors.org/getfile/55342/fullsize/1-4-03_141.jpg
http://www.supermotors.org/getfile/55343/fullsize/1-4-03_145.jpg
http://www.supermotors.org/getfile/55372/fullsize/1-4-03_230.jpg
http://www.supermotors.org/getfile/55390/fullsize/1-4-03_282.jpg

And vids from that run

Lower section of firebreak 5 (http://www.supermotors.org/getfile/71450//TSF_Crazed%202.mpg)
Around the tree (http://www.supermotors.org/getfile/56268//TSF_Crazed_3.mpg)
At the top in the muck (http://www.supermotors.org/getfile/56269//Tsf_crazed_1.mpg)

:rockon

Blown

01-16-2005, 04:23 PM

Did I mention that the tailgate is cut out?
http://www.supermotors.org/getfile/144373/fullsize/DSCN0894.JPG
Yes! This is an 80lb weight saver and at the very back where it counts for more.
http://www.supermotors.org/getfile/144374/fullsize/DSCN0892.JPG
This pic shows my in bed spare tire hold down, cage attempt, removal of all the plastic trim, and matching bed coating. The tailgate has been painted to match but I don't have a recent pic. Today I get the afternoon to do some work on ole Clyde!

trey aka superbronco

01-16-2005, 05:01 PM

Did I mention that the tailgate is cut out?
Did I mention that I cut my rig COMPLETELY IN HALF!
http://texasfourwheelers.com/photos/finishedouterweld.jpg http://texasfourwheelers.com/photos/finishedinnerweld.jpg :rebelflag
Dang this is a tough crowd! :shrug

BlancoBronco

01-16-2005, 05:49 PM

Blown you keep showing us all these great high performance parts!
Very impressive! :rockon I LIKE!

& you made a very got point too..
Treys rig is a cool one of a kind!

& then s theres Blaze! Running those big meats With his TTB & doing well with it! :clap

3 very uniqe rigs doing 3 different uniqe things.....

I cant decide...........

& then theres crazed & Crazed@work............. :histerica I'm glad I dont have to decide today!

Cracker

01-16-2005, 06:11 PM

Ya got my vote , Blaze. ...and I never vote ! lol ...love the stickers.

AndyBronco

01-16-2005, 10:46 PM

http://www.fordtruckworld.com/gallery/AndyBronco/514810.jpg

http://www.fordtruckworld.com/gallery/AndyBronco/514808.jpg

http://www.fordtruckworld.com/gallery/AndyBronco/514807.jpg

http://www.fordtruckworld.com/gallery/AndyBronco/514806.jpg

http://www.fordtruckworld.com/gallery/AndyBronco/514904.jpg

http://www.fordtruckworld.com/gallery/AndyBronco/514902.jpg

http://www.fordtruckworld.com/gallery/AndyBronco/514901.jpg

http://www.fordtruckworld.com/gallery/AndyBronco/514891.jpg
putting dustins rock sliders to good use

trey aka superbronco

01-16-2005, 10:58 PM

more pics from Liberty Tx
http://texasfourwheelers.com/photos/Liberty14.jpg
http://texasfourwheelers.com/photos/Liberty15.jpg
http://texasfourwheelers.com/photos/Liberty16.jpg
http://texasfourwheelers.com/photos/Liberty17.jpg
http://texasfourwheelers.com/photos/Liberty18.jpg
http://texasfourwheelers.com/photos/Liberty19.jpg
http://texasfourwheelers.com/photos/Liberty20.jpg

79F150

01-16-2005, 11:11 PM

Crazed

01-16-2005, 11:18 PM

TSF again...

http://www.supermotors.org/getfile/55401/fullsize/TSF_1-11-03_018.jpg
http://www.supermotors.org/getfile/55409/fullsize/TSF_1-11-03_035.jpg
http://www.supermotors.org/getfile/55413/fullsize/TSF_1-11-03_048.jpg
http://www.supermotors.org/getfile/55416/fullsize/TSF_1-11-03_055.jpg
http://www.supermotors.org/getfile/55420/fullsize/TSF_1-11-03_070.jpg
http://www.supermotors.org/getfile/55422/fullsize/TSF_1-11-03_073.jpg
http://www.supermotors.org/getfile/55447/fullsize/TSF_1-11-03_152.jpg
http://www.supermotors.org/getfile/55479/fullsize/TSF_1-11-03_235.jpg
http://www.supermotors.org/getfile/55480/fullsize/TSF_1-11-03_236.jpg
http://www.supermotors.org/getfile/55481/fullsize/TSF_1-11-03_237.jpg

Crazed

01-16-2005, 11:26 PM

http://www.supermotors.org/getfile/55482/fullsize/TSF_1-11-03_239.jpg
http://www.supermotors.org/getfile/55484/fullsize/TSF_1-11-03_241.jpg
http://www.supermotors.org/getfile/55491/fullsize/TSF_1-11-03_248.jpg
http://www.supermotors.org/getfile/55495/fullsize/TSF_1-11-03_254.jpg
http://www.supermotors.org/getfile/55501/fullsize/TSF_1-11-03_264.jpg
http://www.supermotors.org/getfile/55506/fullsize/TSF_1-11-03_269.jpg
http://www.supermotors.org/getfile/55507/fullsize/TSF_1-11-03_270.jpg
http://www.supermotors.org/getfile/55509/fullsize/TSF_1-11-03_272.jpg

:brownbag

BlueBronco

01-16-2005, 11:36 PM

Holy nose dive Batman! :shocked :shocked :shocked
http://www.supermotors.org/getfile/55484/fullsize/TSF_1-11-03_241.jpg

Crazed

01-16-2005, 11:40 PM

ya that sucked....thought for sure it wrecked it

Drilim

01-17-2005, 01:16 AM

So many variations, so many pics.

I cant decide yet.

Ogeechee 4x4

01-17-2005, 01:20 AM

So many variations, so many pics.

I cant decide yet.

:stupid

Bronco85

01-17-2005, 01:57 AM

Ah Man.. I thought this thread was for nominating people. So I never came in.. I'm going to have to look at all 8 pages now!

Blaze

01-17-2005, 02:12 AM

Yeah I wondered if the title might throw some folks off...:shrug

Bronco85

01-17-2005, 02:15 AM

trey aka superbronco

01-17-2005, 09:47 AM

Well I voted for Blown.. Because that engine is bad ass..

Was going to Vote for the SuperBronco. But after seeing the guy sitting next to the winch while in use, and an open cab. I decided againsted. Very Dangarous, I hope you have something to block that cable from killing everyone in the truck if it breaks.
I've got got several safeguards that I've built into my winch system that you don't have with an electric; 1) I have a bypass valve which relieves at 2500 psi (this is also monitored by a gauge mounted in cab), which is 8000lb max pull on this winch. 2) I am running 3/8" cable (inspected, tested, and rewound after each outing) which has a rating of 15500 lbs. (almost 2x the pull that the system bypasses at, and 1/3x stronger than the 9800 lb rating of the 5/16 cable used on most 8k winches).The strap used around the tree is also an industrial unit rated to match the pulls generated by the winch. I probably should have layed jacket or something over the line that would take it to the ground in the unlikely event of a failure, but I work daily with cranes winches and loads far greater than this and am well versed in safe rigging practices and capacities for a given system. 3) Notice that only personnel required for the extraction are nearby, all bystanders have been moved a safe distance away.
My rig has been highly modified through-out, my primarily design goal is for recovery and extraction work, safety being the fore-most priority and equipment capability and reliability being second, hence the 3/4 ton frame and running gear. This having been said, no hard feelings; Blaze, Blown, Crazed, and the other nominees are outstanding rigs in their own right! I sure could have used and would have greatly appreciated your vote though! :twak :rebelflag

Blaze

01-17-2005, 12:13 PM

Yeah, so, throw a coat over it next time..:shrug Ya got my vote!
I love that rig, and I'm sure all of us have slipped up here and there, I can't make a judgement about someones safe practices from one picture.....:beer

Crazedatwork

01-17-2005, 03:54 PM

LOL the more pics i post the less votes i get... :histerica

well lets do some more then.

http://www.supermotors.org/getfile/55596/fullsize/SOA_shakedown_run_2-2-03_049.jpg
http://www.supermotors.org/getfile/55624/fullsize/SOA_shakedown_run_2-2-03_193.jpg
http://www.supermotors.org/getfile/55625/fullsize/SOA_shakedown_run_2-2-03_195.jpg
http://www.supermotors.org/getfile/55626/fullsize/SOA_shakedown_run_2-2-03_200.jpg
http://www.supermotors.org/getfile/55627/fullsize/SOA_shakedown_run_2-2-03_201.jpg
http://www.supermotors.org/getfile/55629/fullsize/SOA_shakedown_run_2-2-03_203.jpg
http://www.supermotors.org/getfile/55637/fullsize/SOA_shakedown_run_2-2-03_224.jpg
http://www.supermotors.org/getfile/55640/fullsize/SOA_shakedown_run_2-2-03_227.jpg
http://www.supermotors.org/getfile/55641/fullsize/SOA_shakedown_run_2-2-03_229.jpg

:shrug

Crazedatwork

01-17-2005, 04:01 PM

My bud Franks pics from the same run

http://www.supermotors.org/getfile/55678/fullsize/SOA_shakedown_run_2-2-03_Franks_019.jpg
http://www.supermotors.org/getfile/55679/fullsize/SOA_shakedown_run_2-2-03_Franks_021.jpg
http://www.supermotors.org/getfile/55685/fullsize/SOA_shakedown_run_2-2-03_Franks_035.jpg
http://www.supermotors.org/getfile/55687/fullsize/SOA_shakedown_run_2-2-03_Franks_037.jpg
http://www.supermotors.org/getfile/55689/fullsize/SOA_shakedown_run_2-2-03_Franks_039.jpg
http://www.supermotors.org/getfile/55695/fullsize/SOA_shakedown_run_2-2-03_Franks_045.jpg
http://www.supermotors.org/getfile/55696/fullsize/SOA_shakedown_run_2-2-03_Franks_046.jpg
http://www.supermotors.org/getfile/55714/fullsize/SOA_shakedown_run_2-2-03_Franks_101.jpg
http://www.supermotors.org/getfile/55715/fullsize/SOA_shakedown_run_2-2-03_Franks_102.jpg
http://www.supermotors.org/getfile/55723/fullsize/SOA_shakedown_run_2-2-03_Franks_051.jpg

:wacko

Bronco85

01-17-2005, 04:02 PM

jackhart

01-17-2005, 04:44 PM

LOL the more pics i post the less votes i get... :histerica

hahaha...i know that feeling!

so i'm throwing my vote to Blaze... :thumbup

Burl Swift

01-17-2005, 05:18 PM

My vote went to Crazed.

Crazedatwork

01-17-2005, 05:23 PM

hahaha...i know that feeling!

so i'm throwing my vote to Blaze... :thumbup

Thanks alot :twak

Crazed

01-17-2005, 06:46 PM

Trip to the coast with the kids and dog (Pre Cassius...he is coming soon)

http://www.supermotors.org/getfile/55759/fullsize/Dog-_Beach_trip_3-1-03_037.jpg
http://www.supermotors.org/getfile/55761/fullsize/Dog-_Beach_trip_3-1-03_039.jpg
http://www.supermotors.org/getfile/55768/fullsize/Dog-_Beach_trip_3-1-03_071.jpg
http://www.supermotors.org/getfile/55771/fullsize/Dog-_Beach_trip_3-1-03_074.jpg

:beer

Blown

01-17-2005, 07:44 PM

cavernous maximus:
http://www.supermotors.org/getfile/171108/fullsize/DSCN0932.JPG

I've had a washer and dryer back there, Loads of lumber including 8 railroad ties, Sand, cinders, slept back there, cooked back there, H2O heater, The "Wee little people" play racket ball back there and Overflow crapola from jeeps on numerous trips including trash everyone else did not have room to carry out!
Seems you can only get so much in a heep and only "strap on" so much stuff on the outside and we, being full size don't need to strap on anything! :thumbup :histerica It's great to be fullsized!

Note the fine rear window retention device (two C-clamps and stick of Oak).

Go premium, donate, do give something in appreciation of this fine site and recent upgrade.

Blown

01-17-2005, 07:51 PM

More cut-out crap:
http://www.supermotors.org/getfile/144434/fullsize/DSCN0898.JPG
In progress:
http://www.supermotors.org/getfile/142412/fullsize/DSCN0877.JPG
http://www.supermotors.org/getfile/142417/fullsize/DSCN0886.JPG

DirtyDeedz

01-17-2005, 07:55 PM

blaze all day.. keep up the good work my man. :beer

trey aka superbronco

01-17-2005, 10:21 PM

Trey, It's nice to hear that you have safe guards in place. But still Shit happens. I hear to many stories about cables breaking and stuff to screw around with them.. Watching a Cable Break and what it does to a tree that it hit, was pretty cool. But if that was a person we would have been carrrying out 2 halfs of a person...Your truck is badass for sure.. Would love to have something like that, maybe some day.
Hey Bronco 85, first off, Thanks!, I appreciate the compliment. Secondly, is it OK to assume that you mistakenly made your comment without having enough information on the situation at hand. I have seen cables broken, chains too. That's what we were using in the early 80's (about the time you were born!) before straps became popular. In almost every case each was being used either improperly, or above it's rated capacity, or the equipment had been neglected. That doesn't mean these can't be used safely, you just need to know a little bit about what you are intending to accomplish and what tools you 'll need for the job. In the 20+ years since that time I've learned a lot about using this stuff properly.
Shit happens? That's not really that common, it's usually tracable to something that someone's overlooked or short-cutted to save time or money. I haven't spared any cost for my system, in fact I could have easily bought several top of the line electric winchs for what it cost, except it would not have performed in the manner that I desired. In my work, I'm required to evaluate and approve lifts plans for equipment ranging from several hundred pounds to some that exceed 100,000 pounds. (The largest to date has been a compressor lid that weighed 67 tons, and after lifting it we had to flip it over!) We load test the crane, slings and every piece of rigging to be used before we ever start, and each is over-rated for the task that it is going to be used for. I used this same philosophy in the design and use of my winch!

trey aka superbronco

01-17-2005, 10:26 PM

You are right in questioning someone or equipment that you aren't familiar with, but ask the right questions before you start making assumptions, you might be surprised what you can learn.
That having been said and my blood pressure starting to come back down out of the red zone, if any of the mods think I've over-stepped my bounds, I'll gladly keep my opinions to myself from this point out. :brownbag :shrug

Mels

01-17-2005, 11:22 PM

Hey Trey, I was wondering if you added any support to the back of the Bko since you're running without a tailgate? Don't the sides wanna flex too much?

trey aka superbronco

01-17-2005, 11:34 PM

not too much of a problem yet, the frame is pretty stiff from the modifications I've made and the old fifth wheel trailer mount which is still in place as well.

Blown

01-18-2005, 09:32 AM

6" TTB spring vs 6" Superflex Viva Le Difference"!
http://www.supermotors.org/getfile/130020/fullsize/DSCN0780.JPG

I had the TTB springs in when I ramped tested it. I got to get back to that ramp and really should see a huge difference. :thumbup

bnkrtstk

01-18-2005, 09:42 AM

KillerRanger

01-18-2005, 01:44 PM

Well, looks like my vote is going to Blown.

I also really like Blaze's bronc, but I got turned off to it when he stated that it's use is only pavement pounding now. Not really into "pretty trucks".. Although through ("Although through".. wtf?) if ya'd start wheeling it it and pavement pound a pavement pounder truck, I'd vote that way. (cuz blown's is badass, but pisses me off that he's spending all that $$ and not me :( :D )

Blaze

01-18-2005, 02:40 PM

I also really like Blaze's bronc, but I got turned off to it when he stated that it's use is only pavement pounding now. Not really into "pretty trucks".. Although through if ya'd start wheeling it it and pavement pound a pavement pounder truck, I'd vote that way.
Ya got to check out my Website (http://www.supermotors.org/registry/vehicles/detail.php?id=3808)....it's a nomination based contest, I don't get to decide which ride I pimp, but I've got two...:shrug
Even though I used to pound on "The Beast" pretty hard before I retired it to the street, I beat the shit outa my trailrig!! :rockon

BlancoBronco

01-18-2005, 03:12 PM

Still undecided................................ :shrug

Blown

01-18-2005, 03:24 PM

Well, looks like my vote is going to Blown.

I also really like Blaze's bronc, but I got turned off to it when he stated that it's use is only pavement pounding now. Not really into "pretty trucks".. Although through if ya'd start wheeling it it and pavement pound a pavement pounder truck, I'd vote that way. (cuz blown's is badass, but pisses me off that he's spending all that $$ and not me :( :D )

Thank you, thank you very much! :thumbup

It's my one thing, my DD is a 91 Ford Exploder that I work on too and they are expensive parts, but I've installed them and earned them.

KillerRanger

01-18-2005, 03:35 PM

Ya got to check out my Website (http://www.supermotors.org/registry/vehicles/detail.php?id=3808)....it's a nomination based contest, I don't get to decide which ride I pimp, but I've got two...:shrug
Even though I used to pound on "The Beast" pretty hard before I retired it to the street, I beat the shit outa my trailrig!! :rockon

Lol.. No hard feelings :beer

we'll see again when/if your trail rig is up :D

KillerRanger

01-18-2005, 03:36 PM

Thank you, thank you very much! :thumbup

It's my one thing, my DD is a 91 Ford Exploder that I work on too and they are expensive parts, but I've installed them and earned them.
I know.. My DD is a focus :(

The ranger is sitting in the garage with no axles, no trans.. lol.

Blown

01-18-2005, 03:41 PM

Blaze, don't :cry you already won this thing once, have the advantage of being a moderator and being on here all the time. I notice Crazed has taken this before as well. What's with that? Once isn't enough?

This is my next hope for a little item to add to Clyde. Once it is installed, I will cut off more sheet metal and bend more tubing. It's a Ford 9" with 1 ton Dana 60 outers, a hybrid!
http://www.supermotors.org/getfile/171355/fullsize/topsteer-(2).jpg
This is a high steer model with low pinion. I want to put a True Hi9 in it.
http://www.supermotors.org/getfile/171356/fullsize/9%20and%2060.jpg
This one had the custom housing.
http://www.supermotors.org/getfile/171357/fullsize/knuck%20and%20yoke.jpg
Knucky and yoke!

BlancoBronco

01-18-2005, 03:47 PM

Hey Blown...
do you already have that front end? Like in your garage?
or is it like on a wish list?

Crazedatwork

01-18-2005, 03:49 PM

Ill play some more, why not?

Shultsey run 3/03

http://www.supermotors.org/getfile/55854/fullsize/Shultseys_run_3-22-03_Frank_010.jpg
http://www.supermotors.org/getfile/55865/fullsize/Shultseys_run_3-22-03_Frank_021.jpg
http://www.supermotors.org/getfile/55879/fullsize/Shultseys_run_3-22-03_055.jpg
http://www.supermotors.org/getfile/55883/fullsize/Shultseys_run_3-22-03_061.jpg
http://www.supermotors.org/getfile/55884/fullsize/Shultseys_run_3-22-03_062.jpg
http://www.supermotors.org/getfile/55885/fullsize/Shultseys_run_3-22-03_Frank_033.jpg
http://www.supermotors.org/getfile/55887/fullsize/Shultseys_run_3-22-03_063.jpg
http://www.supermotors.org/getfile/55888/fullsize/Shultseys_run_3-22-03_Frank_037.jpg
http://www.supermotors.org/getfile/55889/fullsize/Shultseys_run_3-22-03_064.jpg
http://www.supermotors.org/getfile/55890/fullsize/Shultseys_run_3-22-03_065.jpg

This is why i got sliders.

bnkrtstk

01-18-2005, 03:53 PM

So, who has recent wheeling pics? I'm getting deja vu here. :brownbag

Crazedatwork

01-18-2005, 03:56 PM

More from the same run...

http://www.supermotors.org/getfile/55893/fullsize/Shultseys_run_3-22-03_076.jpg
http://www.supermotors.org/getfile/55894/fullsize/Shultseys_run_3-22-03_079.jpg
http://www.supermotors.org/getfile/55896/fullsize/Shultseys_run_3-22-03_082.jpg
http://www.supermotors.org/getfile/55897/fullsize/Shultseys_run_3-22-03_084.jpg
http://www.supermotors.org/getfile/55905/fullsize/Shultseys_run_3-22-03_Frank_040.jpg
http://www.supermotors.org/getfile/55916/fullsize/Shultseys_run_3-22-03_Frank_051.jpg
http://www.supermotors.org/getfile/55933/fullsize/Shultseys_run_3-22-03_162.jpg
http://www.supermotors.org/getfile/55934/fullsize/Shultseys_run_3-22-03_163.jpg

On the strap because oil pressure dropped to 0 again...seemed to do that with the 5.0 at steep angles when the front tires came off the ground...odd.

(notice the mud on the roof....i was giving it all it had)

Crazedatwork

01-18-2005, 04:01 PM

So, who has recent wheeling pics? I'm getting deja vu here. :brownbag

Trying to find some that noone has seen...?

bnkrtstk

01-18-2005, 04:04 PM

Trying to find some that noone has seen...?

You know you have some, now stop holding back :toothless

BlueBronco

01-18-2005, 04:08 PM

I heard that if you win FOTM twice, your nutts will fall off? :shrug

Blown

01-18-2005, 04:23 PM

Hey Blown...
do you already have that front end? Like in your garage?
or is it like on a wish list?

I don't have it...................yet! I have some great business prospects that would allow me to purchase it, if they come through, in second quarter 05. If not, well hopefully by the end of the year. :thumbup

Drooooooooooooooooooooooooooolllllllllllllllllllll lllllllllllllll!
http://www.supermotors.org/getfile/167538/fullsize/hexburn%20drivers%20drop.jpg

Blown

01-18-2005, 04:24 PM

I heard that if you win FOTM twice, your nutts will fall off? :shrug

Damn, is it worth it? Consider it bro's Nutless!

lightnin

01-18-2005, 04:28 PM

Drooooooooooooooooooooooooooolllllllllllllllllllll lllllllllllllll!
http://www.supermotors.org/getfile/167538/fullsize/hexburn%20drivers%20drop.jpg

What is that. I have never seen anything like it.

Blown

01-18-2005, 04:32 PM

lightnin

01-18-2005, 04:35 PM

That is a hybrid Ford 9"/Dana 60: Custom 9" housing with Dana 1 ton outers. Yours for the price of a nice 96 bronc. :deal

Stronger than a 60 fer sure! Ya just got to learn to drive with the one arm and leg you have left!

Good thing I have a 83. If I gave ya a 96 bronco I could sit that axle in my driveway in the place of my bronco and just look at it caus I couldn't afford anything to put it under. :brownbag Looks Nice.

Blown

01-18-2005, 04:37 PM

http://www.supermotors.org/getfile/125344/fullsize/DSCN0752.JPG
That's my favorite spotter/copilot up and out of the way. He knows what to do when Clyde lifts a leg.

Crazedatwork

01-18-2005, 05:31 PM

Damn, is it worth it? Consider it bro's Nutless!

Im married...would it matter?

Blaze

01-18-2005, 06:08 PM

Lol.. No hard feelings
Oh there never was dude...:thumbup
I just wanted you to know I wasn't some young, dumb web wheeler...I'm an old, dumb, RL wheeler that is usualy the one in the group who says "hold my beer and watch this!... I can do this , I'll just...oh shit!...can someone give me a tug"??!!!!) :histerica

P.S. Disclaimer: no I don't drink on the trail...the "hold my beer and watch this" is a redneck figure of speech! (although I do keep plenty of Anhieser Bush's stock holders VERY happy once I get back to camp!! :drinkbud)

Mels

01-18-2005, 07:22 PM

I'm an old, dumb, RL wheeler that is usualy the one in the group who says "hold my beer and watch this!... I can do this , I'll just...oh shit!...can someone give me a tug"??!!!!)

D00d, he ain't kidding. I specifically remember from WITC.. "Ya'll watch out, let's break some shit! Uh...I'm stuck." :histerica

BlancoBronco

01-18-2005, 07:27 PM

I just wanted you to know I wasn't some dumb web wheeler..

:eek: HEY!!
What you trying to say..... :mad: .................. :goodfinge

Blown

01-18-2005, 07:36 PM

A bit more, I pulled these out of my arse:
http://www.supermotors.org/getfile/171383/fullsize/PDC_0257.jpg
learning to rock!
http://www.supermotors.org/getfile/171384/fullsize/PDC_0237.jpg
Stretching it, The rear was too soft, It was not balanced to the front. I added three 5/16" thick F150 leaves under the 1/4" thick custom leaf pack.

BlancoBronco

01-18-2005, 07:44 PM

Posting some really bad azz pics Its looking like I'm gonna have to go with BLOWN! :rockon
With each picture he post I gain a little more respect for whats he's done with that rig! :clap

But come on guys you can still steal my vote away.....
if you really try. :goodfinge

trey aka superbronco

01-18-2005, 08:02 PM

Need to ask a question? Do you guys have a dedicated camera crew? :beer :shrug Can I borrow them?

bnkrtstk

01-18-2005, 08:08 PM

Need to ask a question? Do you guys have a dedicated camera crew? :beer :shrug Can I borrow them?

If I had one you could borrow them, but for now my vote will have to do.

chambiec1

01-18-2005, 08:08 PM

I don't have it...................yet! I have some great business prospects that would allow me to purchase it, if they come through, in second quarter 05. If not, well hopefully by the end of the year. :thumbup

Drooooooooooooooooooooooooooolllllllllllllllllllll lllllllllllllll!
http://www.supermotors.org/getfile/167538/fullsize/hexburn%20drivers%20drop.jpg
Why is it silver?

trey aka superbronco

01-18-2005, 08:14 PM

If I had one you could borrow them, but for now my vote will have to do.
What else could a guy ask for? Thanks :rebelflag

bnkrtstk

01-18-2005, 08:16 PM

Why is it silver?

He can't answer that, it's not his. :brownbag

BlancoBronco

01-18-2005, 08:28 PM

Why is it silver?

Because thats cheaper than chrome!
Its Bling Bling on a budget. :doh: :slap

jasong2gs

01-18-2005, 08:32 PM

Blown

01-18-2005, 08:38 PM

He can't answer that, it's not his. :brownbag

:goodfinge I will have one and do have the means. I never said it was mine, beyotch. Look back a few post!

And Yes I can answer! It is silver because that is the color they painted it. Perhaps they thought it would gain more attention for their product. :shrug

Blown

01-18-2005, 08:43 PM

Blown, you had my vote untill I saw Superbronco. Bottom line, his hood ornament(s) beats yours all to pieces! All the trucks look great, I didnt know about this, i'll have to put my name in the hat for March, thats my birthday! :bday Later!
-Jason

Thanks! It's OK I'd take second to his rig. It is one of a kind, very cool! I'll work the hood ornament. :wacko

trey aka superbronco

01-18-2005, 08:58 PM

Thanks! It's OK I'd take second to his rig. It is one of a kind, very cool! I'll work the hood ornament. :wacko
Thanks Blown, and just to show how much I appreciate it I'll show you where I got mine and help you "mount" a couple of them on yours! :chili: :chili: :chili:

trey aka superbronco

01-18-2005, 10:05 PM

peteyg

01-18-2005, 10:39 PM

pics of the new (to me) wheels after two hours of polishing them out.
http://texasfourwheelers.com/photos/new_wheel3.JPG
http://texasfourwheelers.com/photos/sb1_17_05a.JPG
off topic, can anyone Id these for me? no mfg's name on the back, just the wheel size and ratings, 9.75x16.5, 3700lbs. I think that they might be older M/T's :shrug

More likely AE589's. That's what they look like to me. Hard to tell, though...it's such a generic design, there's a lot of mfg's that make styles similar to that.

Shadofax

01-18-2005, 10:40 PM

I never vote on the 1st page..
theres still weeks of awsome pics to sway me.....

But damn Crazed sure seems to have alot dont he? :wacko

You oughta know.....what about 4000 pics worth? maybe a hundred vids? :thumbup

I agree though, the engine pic is evil!!!!!! :goodfinge :chili:

great rigs again as usual, but this was just too funny to pass up:

4x4Pepe:Hey hey Crazed... slow down bud, don't blow your load before the first day!

Funny as Heii. :chili: :histerica

He did come out of the blocks like an Olympic sprinter that has just got his daily fix. Or maybe a baseball player.....anyway.... :clap :clap :clap

BikerPepe`

01-18-2005, 10:48 PM

:lolup

That having been said and my blood pressure starting to come back down out of the red zone, if any of the mods think I've over-stepped my bounds, I'll gladly keep my opinions to myself from this point out. :brownbag :shrug
I see no problem with your responses on this subject Trey and infact found it good reading, information wise anyhow! :thumbup

Need to ask a question? Do you guys have a dedicated camera crew? :beer :shrug Can I borrow them?
Don't ya hate that? Everytime I've run in this contest (back in the day) all the pics I ever had to sport were poser shots I had to take myself. Damn hard to wheel and get actions pics when your out there by yourself. :banghead

Blown, you had my vote untill I saw Superbronco. Bottom line, his hood ornament(s) beats yours all to pieces! All the trucks look great, I didnt know about this, i'll have to put my name in the hat for March, thats my birthday! :bday Later!
-Jason
1. WELCOME TO FSB!
2. If you want in it... you gotta get nominated and the best way to do that is come onto the site strong and show off your stuff. Once the members think your worthy... then you'll get a nomination. :thumbup
3. Want to learn more about FOTM? Read HERE --> RULES FOR FOTM (http://www.fullsizebronco.com/forum/showthread.php?t=1884) <-CLICKY!!! :chili:

Crazed

01-18-2005, 10:52 PM

SOLV cleanup '03

http://www.supermotors.org/getfile/56007/fullsize/SOLV_cleaup_4-26-03_044.jpg

Oops.
http://www.supermotors.org/getfile/56020/fullsize/SOLV_cleaup_4-26-03_090.jpg
http://www.supermotors.org/getfile/56021/fullsize/SOLV_cleaup_4-26-03_091.jpg
http://www.supermotors.org/getfile/56022/fullsize/SOLV_cleaup_4-26-03_092.jpg
http://www.supermotors.org/getfile/56024/fullsize/SOLV_cleaup_4-26-03_094.jpg

Street Truck---> :twak <---Crazed

trey aka superbronco

01-18-2005, 10:58 PM

More likely AE589's. That's what they look like to me. Hard to tell, though...it's such a generic design, there's a lot of mfg's that make styles similar to that.
give that man a cigar! Taken from AE's site "0589-6988 16.5x9.75 Polished 8 on 6.5 -18 mm 4 3/4 N/I 3700 lbs. 29 lbs." I had forgotten about them, I'm wanting to get a match for the spare. :thumbup Thanks

Crazed

01-18-2005, 11:08 PM

Broncofest 2003

Cassius sleeping on the way to broncofest
http://www.supermotors.org/getfile/56054/fullsize/Broncofest_2003_003.jpg
http://www.supermotors.org/getfile/56055/fullsize/Broncofest_2003_005.jpg
http://www.supermotors.org/getfile/56056/fullsize/Broncofest_2003_008.jpg
http://www.supermotors.org/getfile/56072/fullsize/Broncofest_2003_047.jpg
http://www.supermotors.org/getfile/56073/fullsize/Broncofest_2003_048.jpg
http://www.supermotors.org/getfile/56125/fullsize/Broncofest_2003_219.jpg
http://www.supermotors.org/getfile/56127/fullsize/Broncofest_2003_221.jpg
http://www.supermotors.org/getfile/56128/fullsize/Broncofest_2003_222.jpg
http://www.supermotors.org/getfile/56186/fullsize/Broncofest_2003_379.jpg

And puppy on the way home
http://www.supermotors.org/getfile/56201/fullsize/Broncofest_2003_411.jpg
:clap

BlancoBronco

01-18-2005, 11:37 PM

:lolup :eek: Wow that hi lift seems to make a comfy pillow!
Another one of its many use's :thumbup

Crazed

01-19-2005, 12:12 AM

Trip to the river with the dogs
http://www.supermotors.org/getfile/56249/fullsize/6-7-03_003.jpg
http://www.supermotors.org/getfile/56250/fullsize/6-7-03_004.jpg
http://www.supermotors.org/getfile/56251/fullsize/6-7-03_005.jpg
http://www.supermotors.org/getfile/56252/fullsize/6-7-03_009.jpg
http://www.supermotors.org/getfile/56253/fullsize/6-7-03_011.jpg

:thumbup

Crazed

01-19-2005, 12:21 AM

Oops noticed the hood scoop was on in that pic...

http://www.supermotors.org/getfile/56225/fullsize/6-4-03_004.jpg
http://www.supermotors.org/getfile/56228/fullsize/6-4-03_012.jpg
http://www.supermotors.org/getfile/56229/fullsize/6-4-03_015.jpg
http://www.supermotors.org/getfile/56231/fullsize/6-4-03_019.jpg
Now to make it functional...adds to the cooling of the engine compartment
http://www.supermotors.org/getfile/56234/fullsize/Hood_scoop_005.jpg
http://www.supermotors.org/getfile/56236/fullsize/Hood_scoop_007.jpg
http://www.supermotors.org/getfile/56240/fullsize/Hood_scoop_014.jpg
http://www.supermotors.org/getfile/56241/fullsize/Hood_scoop_015.jpg
http://www.supermotors.org/getfile/56247/fullsize/Hood_scoop_033.jpg

:chili:

Mels

01-19-2005, 12:25 AM

Puppies!! How come we haven't seen any new pics of the pups lately?

BlancoBronco

01-19-2005, 12:41 AM

Puppies!! How come we haven't seen any new pics of the pups lately?

:lolup :lolup ...... :goodfinge

Crazed

01-19-2005, 12:49 AM

Here you go Babe...all new ones

http://www.supermotors.org/getfile/171502/fullsize/DSC00831.JPG
http://www.supermotors.org/getfile/171503/fullsize/DSC00844.JPG
http://www.supermotors.org/getfile/171504/fullsize/DSC00802.JPG
http://www.supermotors.org/getfile/171505/fullsize/DSC00899.JPG
http://www.supermotors.org/getfile/171506/fullsize/DSC00900.JPG

:wacko

BikerPepe`

01-19-2005, 04:57 AM

Damn you Crazed!!! :twak

http://www.supermotors.org/getfile/56231/fullsize/6-4-03_019.jpg

Just when I thought I'd gotten over your Bronco and moved on... YA PULL ME BACK IN!!! :brownbag

Too bad I already voted. :goodfinge

BlancoBronco

01-19-2005, 05:06 AM

:topic :topic :topic
I love dogs too.....But come on this aint My pets dogs of the Month! :histerica

Your not trying to sway us over to vote for you with cute Doggy pics are you? :wacko :goodfinge

You cheating democrat! :slap Lol!!!!

Burl Swift

01-19-2005, 11:36 AM

Dogs always make posts better.

BlueBronco

01-19-2005, 12:39 PM

Dogs always make posts better.

Especially when they get to drive!!!

Crazedatwork

01-19-2005, 01:14 PM

Hey...my dogs are a big part of my life and who i am.

Burl Swift

01-19-2005, 01:41 PM

Hey...my dogs are a big part of my life and who i am.

No need to explain yourself Crazed, anyone who has a dog knows exactly what you're talking about.

KillerRanger

01-19-2005, 02:20 PM

Oh there never was dude...:thumbup
I just wanted you to know I wasn't some young, dumb web wheeler...I'm an old, dumb, RL wheeler that is usualy the one in the group who says "hold my beer and watch this!... I can do this , I'll just...oh shit!...can someone give me a tug"??!!!!) :histerica

P.S. Disclaimer: no I don't drink on the trail...the "hold my beer and watch this" is a redneck figure of speech! (although I do keep plenty of Anhieser Bush's stock holders VERY happy once I get back to camp!! :drinkbud)
No doubt.. It's obvious you used to wheel it. But now in my eyes it's a glorified overly expensive to maintain car now that you retired it :D

don't mind me, I just don't respect my vehicle's sheet metal, thats all.. :D

Crazedatwork

01-19-2005, 03:47 PM

Went down to be the test mule for David for making sliders

http://www.supermotors.org/getfile/70385/fullsize/Rock%20sliders%20pt1%20005.jpg
http://www.supermotors.org/getfile/70397/fullsize/Rock%20sliders%20pt1%20031.jpg
http://www.supermotors.org/getfile/70376/fullsize/Sliders%20011.jpg
http://www.supermotors.org/getfile/70378/fullsize/Sliders%20014.jpg
http://www.supermotors.org/getfile/70401/fullsize/Sliders%20022.jpg
http://www.