bigdankbronc
02-11-2005, 10:59 AM
87 bronco fs: in dallas area
--------------------------------------------------------------------------------
Just so you know i have put tons of work into this bronco time and money and no shit only drove this truck 3 miles and ive owned it for a year now.
1987 ford bronco
power windows and locks
302 (only part of the drivetrain i havent touched needs to be put back together but it does run no doubt about it)
new 5 speed (i converted this truck from automatic to standard)
new intrument cluster(for a manual not auto)
its has a new steering column(for manual not auto)
new clutch
new slave cylinider
new bw 1356 transfer case
new 4 inch lift
new 16x8 black procomp wheels
new 35x 12.50 x 16 toyo tires
new 4.10 gears front and rear with detroit locker in rear and detroit true trac up front
new brakes all away around but needs to be installed correctly
new chrome headlight assemblies
new headers for it but never installed
new gaskets are rear main seal, oil pan, and valve cover
new alternator
new optima red top battery
new powersteering box
new seals and axels front and rear and ball joints up front
all new bearing all timken or dana spicer
new u joints
it has new speakers kenwood 3 ways and new sony 3 ways up front but never used
new bedliner inside
all new smog and vacum but never installed
it has a new tie rod kit never installed
new solenoid
when i bought this truck i wanted to straigten out all the drivetrain first before and cosmetics the body is rreally straight it does have some rust on the back tail gate and all that good stuff this is strickly a project right now and should only be taken into consideration for someone who has time for something and the appreciation for a truck like this. i am a college student and this has been my passion just like yalls i just want to see it finished. i have more money than i would like to admit in the truck easily just 2,000 in the front axel and another 2 in the rear and only drove the truck to make sure that the gears and lockers were installed correctly.im asking 3500 or best offer or might consider a trade for a jeep or atv, im very busy but the easiest way to reach me is by email and cell phone if you want pictures i can send them to you that way my email is bigdankbronc@yahoo.com, and cell is 214 663 0296 call anytime
__________________
__________________
big truck, big tires, big dank, bdc inc. est 2002
--------------------------------------------------------------------------------
Just so you know i have put tons of work into this bronco time and money and no shit only drove this truck 3 miles and ive owned it for a year now.
1987 ford bronco
power windows and locks
302 (only part of the drivetrain i havent touched needs to be put back together but it does run no doubt about it)
new 5 speed (i converted this truck from automatic to standard)
new intrument cluster(for a manual not auto)
its has a new steering column(for manual not auto)
new clutch
new slave cylinider
new bw 1356 transfer case
new 4 inch lift
new 16x8 black procomp wheels
new 35x 12.50 x 16 toyo tires
new 4.10 gears front and rear with detroit locker in rear and detroit true trac up front
new brakes all away around but needs to be installed correctly
new chrome headlight assemblies
new headers for it but never installed
new gaskets are rear main seal, oil pan, and valve cover
new alternator
new optima red top battery
new powersteering box
new seals and axels front and rear and ball joints up front
all new bearing all timken or dana spicer
new u joints
it has new speakers kenwood 3 ways and new sony 3 ways up front but never used
new bedliner inside
all new smog and vacum but never installed
it has a new tie rod kit never installed
new solenoid
when i bought this truck i wanted to straigten out all the drivetrain first before and cosmetics the body is rreally straight it does have some rust on the back tail gate and all that good stuff this is strickly a project right now and should only be taken into consideration for someone who has time for something and the appreciation for a truck like this. i am a college student and this has been my passion just like yalls i just want to see it finished. i have more money than i would like to admit in the truck easily just 2,000 in the front axel and another 2 in the rear and only drove the truck to make sure that the gears and lockers were installed correctly.im asking 3500 or best offer or might consider a trade for a jeep or atv, im very busy but the easiest way to reach me is by email and cell phone if you want pictures i can send them to you that way my email is bigdankbronc@yahoo.com, and cell is 214 663 0296 call anytime
__________________
__________________
big truck, big tires, big dank, bdc inc. est 2002