Just trying to see who's interested. I was thinking the last weekend in July before the Charity ride. If anyones interested did you want to do just a oneday run or campout overnight(hot!!!!?) I've started looking into certain areas and trying to find out any info I can on legality after reptilikus voiced concern I've never had a problem but if we get a group of people going it would suck to get stopped or have it turn into a monthly quota meeting for johnny law.

Im down for 'wheeling for a day (preferrably Sat.), but i dunno if ill be able to do the whole weekend

I'm also down for it but preferably sun for me

sure why not

sunday's my only day off. hows about Wharton State Forest, thats where they have all them heep jamborees, never been there but it's like a half hour away from me(:banghead i'm an asshole)

Yea i only have sun and mondays off. I think leonard went to whartons. Why are you an a hole:goodfinge

i forget where it was. any weekend is good for me now. new job mon-fri only i don't know what to do with myself now.

A one day run may work for me.keep me posted on when and where. i can still wheel with a bent frame right?:banghead

http://molmed.umassmed.edu/~kdb/pine_trip/pb_trip.html found this, might help

http://www.off-road.com/4x4web/travels/pine-barrens.html

directions to wharton state park office (http://www.mapquest.com/directions/main.adp?go=1&do=nw&2ex=1&src=maps&ct=NA&1y=US&1a=1303+rolling+glen+drive&1p=&1c=boothwyn&1s=pa&1z=19061&1ah=&2a=4110+Nesco+Rd&2s=NJ&2c=Hammonton&2ic=31&2ex=1&2g=bYnR8loSeoM%253d&2y=US&2z=08037-3814&2l=giecOrVfsHs%253d&lr=2&x=92&y=12)

well thats from my house but u guys get the idea

Sounds good, my kit is due in the end of July though, apparently they ran out of raw material for the rear leaf springs and of course the newer kits for the newr vehicles take proirity.

BTW My truck stil leaches mud every time I leave the carwash!!!!

:banghead

thats cause u wash it too much:thumbup

:stupid stop washing it and you won't have anything to complain about.:toothless

Originally posted by Leonard
i forget where it was. any weekend is good for me now. new job mon-fri only i don't know what to do with myself now.

You can come over and get my 90 trail worthy:D

Originally posted by Accessory Man


BTW My truck stil leaches mud every time I leave the carwash!!!!

:banghead

So does mine, especially on the front bumper

so does anyone wanna go scout out a good area this weekend? i got a thing sunday and i work saturday, but i was thinkin saturday night sometime. i'm off at 3 so that'd give us bout 5-6 hours of daylight. then maybe some :beer

Originally posted by drexelsteve
so does anyone wanna go scout out a good area this weekend? i got a thing sunday and i work saturday, but i was thinkin saturday night sometime. i'm off at 3 so that'd give us bout 5-6 hours of daylight. then maybe some :beer

I would but I am helping a buddy install a lift kit on an '83 chevy pick up this weekend. More folks I help, more help I should be able to count on when mine comes:thumbup

Dave what does it need to be a trail rig as long as it starts, drives, and steers your good to go.


Steve i'll check to see whats going on but i'd be up for it. ya still got my cell??

somewhere.....gimme a pm anyway:thumbup

Originally posted by Leonard
Dave what does it need to be a trail rig as long as it starts, drives, and steers your good to go.


Thats true, but I wanna make it better. Plus I think from siting I need to replace the oli pump cause the gauge is low and I get a ticking upon start up.

don't waste your time d, put a hi volume pump in my rig......didn't help at all. and i'm runnin strait 30 too.

Originally posted by drexelsteve
so does anyone wanna go scout out a good area this weekend? i got a thing sunday and i work saturday, but i was thinkin saturday night sometime. i'm off at 3 so that'd give us bout 5-6 hours of daylight. then maybe some :beer

Let me know if you doing this Saturday night. I'll tag along.

Originally posted by drexelsteve
don't waste your time d, put a hi volume pump in my rig......didn't help at all. and i'm runnin strait 30 too.

If your running a High volume pump steve you need an extra deep capacity pan or you might burn out the pump, becuase it is so effiecent there wont be anything left in the pan :D

just waitin till after the next paragon run. if the motor will last till then:shrug I've got an 86 f350, 460-4spd-d60-d70 etc... gonna be doin an awful lot of swappin. if my boat anchor will last till then i'll be happy.

damn steve your gonna be giving that thing a shot of steroids.

460's the first project. THen maybe the front n rears. Might not even use the trans n xfer case. Motor's the #1 priority. So are we on for saturday night? i found bnkrtstk on project bronco n invited him over here. Says he knows a few places in the barrens to wheel. Plus he's runnin a 79:rockon

Originally posted by drexelsteve
460's the first project. THen maybe the front n rears. Might not even use the trans n xfer case. Motor's the #1 priority. So are we on for saturday night? i found bnkrtstk on project bronco n invited him over here. Says he knows a few places in the barrens to wheel. Plus he's runnin a 79:rockon

I'm no tour guide, but I know the way to a few mudholes.

If ya'll find a good place for us to go that sunday then ill go, but nowhere thats frequented by asshole rangers.....im not exactly street legal:eek:

I'm no tour guide, but I know the way to a few mudholes. thats a start:thumbup
.....im not exactly street legal street legal is a relative term. from what i saw your rig looked ok. what've u had problems with?

So Sunday the 27th it is right? I am trying to get a few guys from work who know the pines better than me to go. What time and where do you guys meet? Hopefully no later than 9 am.

Where did you Plan on meeting? We usually meet at the WAWA on Jackson Road in Atco. This way everyone can get lunch or drinks in case they forget on the way down.

i'm trying for this sat. go through to find good places but i have no idea whats gonna happen some of my friends are going through some rough times and i don't know whats gonna happen.

if we're going to do this at wharton why don't we just meet up at the ranger office of whatever that place is.

Sounds fine to me. Which one? The one near Atsion Lake on 206?

so does anyone wanna go scout out someplace tomorrow? Is that wawa the one down the street from the raceway? i'm semi-familiar with atco.

Steve, i havent had problems yet, but you never know when you will, and those guys down there know their stuff. Im only 2" over the limit, so im not real worried, but i dont have a stability sticker either.
Id go scout with ya tomorrow, but i have a timing cover gasket to do tomorrow:(


Also.....Ive never been down in that area, so could somebody PM me some directions from rt206?

Originally posted by reptillikus
Im only 2" over the limit, so im not real worried, but i dont have a stability sticker either

Whaaaa???A limit??? A sticker????? what for???

:shrug the sticker is a NJ thing, in pa you mainly need a certin bumper height(can't rember)correct tire coverage(flairs as you told me that day at the store)and after a certin height the man requires mud flaps. I have to dig up my State inspection book to be exact. and yes feasterville cops do check ( was given a written warning):goodfinge

Bumper Height is 28" I believe, and Feastervile cops do check for flares, becuase they are bored and have nothing better to do. They don't bother me and they all seem to mention I have a lead foot when they come in the store

:shrug

As for the sticker in Jersey, who cares unless you have Jersey plates right?

Yeah, the cops dont care unless you have NJ plates. I could be ticketed for (too much) lift height, no stability papers or sticker, no fender flares (tires stick out), (no) mud flaps, not having covers on my 2 aux. lights up front, and having taillight covers.
Ya gotta love NJ!

So don't they sell fake stickers like they do in Pa for the inspection????

I never liked Jersey, but then again I never liked silly inspection laws either

yeah inspection laws are ridiculous at least some of them. and in PA its 30" for bumper height and no more then 3" i believe for flares.

I know a couple people interested it hookin up with us for the day, maybe 3-4:cool:

cool, when are we doing this again.

I can only do it Sunday. My company picnic is Saturday.

Yes that WAWA is the one down the road from the track.

I'd say this sunday'd be good. if we did it next sunday we'd only have a week or so to prepare for paragon. I say better safe than sorry. we could meet at the wawa down the street from atco raceway and go from there. from what mapquest says wharton is only like a few miles from there. If anybody's not sure how to get there we could meet up n cruise down. I'll bring my grill n some burgers. sound good?:shrug

Sounds good to me. See you at WAWA for any of you coming down 73, just take the jug handle at Jackson Road and make a left. There is a lumber yard on the right and Texaco on the left. Follow it until you see WAWA on the right. Look for a black 79 with winch on the front.

don't think i'll be able to make this one. gotta do some work on a friends car. but ya never know. if i can make it i'll meet ya'll at the wawa, what time???

How does 9am sound?

Im in for this sunday, I think I know where this wawa is.

i'm in:thumbup we'll shoot fro 9 (bare with me if i'm a few min's late, got an A.C trip sat night:rockon) so it's me, gators, bnkrtstk+?...

:shrug

EDIT:

i have to back out, i have an as-yet-unidentified electrical issue. I seem to be losing voltage when at idle, and i havent figured out why yet. I dont want to drive an hour or so from home and then not be able to get back.

yeah i'm gonna have to miss this one as well told a friend i'd do the brakes on thier car, and besides i'm dropping in a new distributor and want to make sure everythings good.

Originally posted by Leonard
yeah i'm gonna have to miss this one as well told a friend i'd do the brakes on thier car,

I hope she is cute :toothless

so hwo's in?

I'll be there at 9AM, just have to check tha gas and fill the oil :thumbup

EDIT:

nevermind. Just saw the other tyhread:o