Choices for aftermarket rims that retain front lock hubs? [Archive] - FSB Forums

: Choices for aftermarket rims that retain front lock hubs?


88BroncoGuy
09-02-2005, 12:41 AM
Question is is there any aftermarket rims I can purchase that will allow me to retain the front locking hubs? If so web links would be great. I don't want rims bad enough to forfit 4wheel drive.

Thanks
Adam

blazenXLT
09-02-2005, 12:45 AM
As far as I know, no rim should make you lose 4WD. I recommend a good set of steel rims, black :thumbup . see my superford

Spazmo
09-02-2005, 12:50 AM
Yeah, you'll have trouble finding rims that don't allow for 4x4, that would fit on a 5x5.5 bolt pattern. It's the hub caps you gotta watch.

derrick36
09-02-2005, 01:05 AM
For the money, these are probably your best choice. :thumbup

http://www.davinwheels.com/2005/index.php

broncoman92
09-02-2005, 01:11 AM
youre twisted derrick

bigbroncojeff
09-02-2005, 01:12 AM
i was going to say these that someone made a thread about the other day
time keepers (http://timekeeperco.com/time_content.html) ... they are bullet proof

but seriously... any rim that is 5x5.5 bolt pattern with a hole in the middle should work... you just by closed caps for the rear and open for the front ... and if you are getting a 12.5 inch wide tire you can go with either a 8" of 10" wide rim

derrick36
09-02-2005, 01:14 AM
youre twisted derrick


That, and really bored.

ToddACimer
09-02-2005, 01:27 AM
i was going to say these that someone made a thread about the other day
time keepers (http://timekeeperco.com/time_content.html) ... they are bullet proof

but seriously... any rim that is 5x5.5 bolt pattern with a hole in the middle should work... you just by closed caps for the rear and open for the front ... and if you are getting a 12.5 inch wide tire you can go with either a 8" of 10" wide rim

I vote for 15x10's with 33x12.5's. That's what I've got and they look sweet

MikE2
09-02-2005, 01:29 AM
Any rim will work, you just need a center cap with the hole in it to get to the locking hub. Of you can also leave the center cap off like this


http://www.supermotors.org/getfile/193687/fullsize/000_0203.JPG

mrains30
09-02-2005, 03:51 AM
For the money, these are probably your best choice. :thumbup

http://www.davinwheels.com/2005/index.php


Those would probably look good in the dumpster on there way to the landfill.
:drinkbud

bigbroncojeff
09-02-2005, 03:56 AM
Those would probably look good in the dumpster on there way to the landfill.
:drinkbud

i posted my "ride" in their forum :toothless wonder what they'll say

gump_black
09-02-2005, 06:28 AM
here is a good rim site http://www.centerlinewheels.com/wheel_deals_list.php
i like the off road series g-2

mrains30
09-02-2005, 07:18 PM
i posted my "ride" in their forum :toothless wonder what they'll say

Let us know. :drinkbud

mda
09-02-2005, 08:46 PM
Any rim will work, you just need a center cap with the hole in it to get to the locking hub. Of you can also leave the center cap off like this


http://www.supermotors.org/getfile/193687/fullsize/000_0203.JPG


Mike...What rims do you have? I like those.


Mike

88BroncoGuy
09-02-2005, 10:11 PM
Appreciate the feedback guys.

Thanks
Adam

derrick36
09-02-2005, 11:22 PM
Appreciate the feedback guys.

Thanks
Adam


I do what I can :thumbup

Big Bad Black SS
09-02-2005, 11:58 PM
I love the look of the mickey thompson classic and classic lock line of wheels. A 15X10 rim is about 110/150 depending if you get the imitation wheel lock look or not and they are just good looking wheels. M/T has some very high quality ppoducts from what ive seen also.

MikE2
09-03-2005, 12:26 AM
Mike...What rims do you have? I like those.


Mike
I dont remember who made them, but the only place I could find them is LMC truck. They had them for $199 each in polished aluminum. I had them powdercoated in gun metal grey right when I bought them.

I looked everywhere for a deep dish 5 spoke wheel in 16x10 like that but the only ones I could ever find was in 5 and 6 lug, not 8, so as soon as I saw that set in the LMCtruck catalog I ordered them right away.

jscart
09-03-2005, 03:29 PM
i posted my "ride" in their forum :toothless wonder what they'll say

OMG!!!! LMAO!! :histerica :histerica :histerica

That is too damn funny. :thumbup :beer

MikE2
09-03-2005, 04:33 PM
i posted my "ride" in their forum :toothless wonder what they'll say
:histerica nothing yet