Here are your Nominees for Oct. '05:

1. Marauder :thumbup
2. Finishlinewest :thumbup
3. Dave's Bronc 90 :thumbup
4. Damager :thumbup
5. Bronco85 :thumbup
6. Andy351 :thumbup.
7. Sixlitre :thumbup
8. Sceep :thumbup
9. Axaviere :shrug

Good luck to all.... :twotu:

Allcruisen :imp :usa

Here's a few to start off the thread..

Few Specs on the Bronco

'85 Fullsize Bronco XLT
Engine: '69 351W w/ '93 EFI
Tranny/Tcase: C6/NP208
Rear Axle: '85 9" w/ 4.56 gears & Detroit locker
Front Axle: '77 D44 w/ 4.56 gears & Locrite Mile Marker hubs
Tires: 38x12.5x15 Bias TSLs w/ 15x10 CenterLine Outlaws
Warn Bumper & M12,000 winch
Custom Fender trim
Kayline Soft top
Dual Batteries
Custom Rock Sliders
Custom Rear Bumper
Etc.

Here's a few pictures to start you all off with :rockon
http://www.supermotors.org/getfile/199352/fullsize/IMG_2372.JPG
http://www.supermotors.org/getfile/209828/fullsize/IMG_2498.JPG
http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Wishbone-Buffalo/Aug%208,%202005/IMG_2736.jpg

My specs:
1983 eddie bauer edition.
35 x 12.50 x 15 good year mtrs with screwed black wheels.
modified superlift extended radius arms
rancho 4" lift
efi 351 conversion
fully line-x'd interior
rear detroit spool
6 point cage
custom 20 gal fuel cell.
custom front bumper
custom rock sliders
random toys scattered around the interior
pioneer am/fm cassette
cobra cb
custom bikini top
custom gauge pod.
lots of bent sheetmetal.

built on a budget for under $2000 including the origional purchase price of the truck.

http://www.dana60.com/sceep/jod/6a.jpg
http://www.dana60.com/sceep/puerco05/quarry1.jpg
http://www.dana60.com/sceep/puerco05/p-4.jpg

origional build pics here - http://www.fullsizebronco.com/forum/showthread.php?t=19256&page=1&pp=20

http://www.fullsizebronco.com/forum/showthread.php?t=42685

Bronco85 gets my vote. Good specs, cool truck that looks like it gets used, and he's tough enough to live in Alaska.

Finishlinewest gets mine :thumbup

Start whoring those pics!!!

bronco85 gets mine...bad a$$ bko plus same year as mine.

I really have little to pimp this year as wheeling has been rather sparse .. much of what I have done has involved a winch and I was more focused on recovery than recording what what was happening... I can list what has been done to the rig since I got it .. some has not been listed, buch this pretty much covers most of it

Eddie Bauer Edition - stock 302
* Replaced engine with EFI 302 from '91 F-150
* New HD Starter
* New Starter Relay
* New HD 130amp Alternator
* New HD Battery
* New Ball Joints
* New U-Joints
* New Axle Seals Front and Rear
* New Warn Premium Hubs
* Fenders Trimmed and Bushwacker Cut Out Flares installed
* Chipped, Hammered and Ground down all rust under entire truck - axles, floor pans, frame, wheelwells, etc
* Undercoated Completely with POR-15 Rust preventitive Paint
* 35x12.50 Dunlop Mud Rovers
* Black 15x10 Rock Krawler Rims
* Sanded and painted the top with Krylon
* Brand New Gas Tank and Sending Unit
* New Master Cylinder and Brake Booster from F250
* 700 WATT Power Inverter Mounted in Glove Box
* RAM Tow Hooks in Front
* Grill Guard with Dual 100 Watt Lights
* New Heater Core
* 6" BDS Suspension Lift with Extended Radius Arms
* Braided Brake Lines Front/Rear
* Extended Differential Breather Lines
* Full 10 Point Roll Cage
* Homemade Half Doors
* New Fuel Pump
* New Feul Pump Relay
* Home made 3" Snorkel
* Home made Rock Sliders
* CB and 4' Firestik Anteanna
* Warn XP9500 Winch
* 200 AMP 3G Alternator
* Dual Batteries
* Inverted Class III Tow Point/Hitch
* Mini-Spooled 8.8
* Cut Rear Bed and Raised Gas Tank for clearance



what it looked like when I got it home :doh0715:

http://www.supermotors.org/getfile/46726/original/QVLIN047.jpg

and stuck in a ravine sliding sideways with wheelspin down into the woods :toothless

http://www.supermotors.org/getfile/235303/fullsize/Aug%207%202005%20fishing.jpg

Probably gonna pick Marauder, Six, Andy, or Bronco85. So I'll see who does the best whorin to get my vote.

Maybe Damager too, hes already off to some good whorin

Bronco85 got my vote. I really dig the crazy Alaska wheelin.

getting ready to completely undercoat with POR-15

http://www.supermotors.org/getfile/46736/original/QVLIN071.jpg

http://www.supermotors.org/getfile/46737/original/QVLIN072.jpg

much better :thumbup

http://www.supermotors.org/getfile/46740/original/QVLIN075.jpg

even prepper/painted my rims until i could afford new ones :toothless

http://www.supermotors.org/getfile/46741/original/QVLIN079.jpg

-I really gotta hold out this month.
Damager and 85Bronco both have
a lot into their rigs and I wanna vote
for them both.

BTW Awesome Glacier Shot 85Bronco.
That is by Far the Best Poser shot I have evr seen in here.
The only thing that would make it better is if it were my Rig
sittin there. Good on ya.

Damager got my vote cause he took a couple pics of my truck up at Essex Junction this year.

Damager got my vote cause he took a couple pics of my truck up at Essex Junction this year.


:twotu: ... click up top Bro

My buddy passed out while Daddy works on the rust

http://www.supermotors.org/getfile/46755/original/QVLIN128.jpg

http://www.supermotors.org/getfile/46756/original/QVLIN130.jpg

Way too start off. I like the idea that you guys are writing up the specs of your vehicle before posting pictures :twotu: :twotu: :twotu:

D. You got some big COJONES living up there. Nice pics so far....

Keep it up, all..... :beer :beer :beer :chili: :chili:

Allcruisen :imp :usa

Here my truck is stock. I cant even believe it looked this nice.

http://www.supermotors.org/getfile/71433/fullsize/bronco2.jpg

http://www.supermotors.org/getfile/71436/fullsize/bronco3.jpg

http://www.supermotors.org/getfile/71437/fullsize/bronco%204.jpg

http://www.supermotors.org/getfile/71438/fullsize/Bronco.jpg

And here it is at my last wheeling trip, as I pummled the hell out of it.

http://www.supermotors.org/getfile/216964/fullsize/DSCF0013.JPG

I'm thinking sceep... but I gotta wait until I see some more pimpin.

workin' on the rust
http://www.supermotors.org/getfile/46747/original/QVLIN095.jpg

http://www.supermotors.org/getfile/46748/original/QVLIN092.jpg

we'll put this jeep hood to use
http://www.supermotors.org/getfile/46749/original/QVLIN122.jpg

http://www.supermotors.org/getfile/46752/original/QVLIN135.jpg
Drivers side
*note* I have taken 1x1 angle iron and bolted it in from the top of the firewall down along the floor to behind the seat. I did this for two reasons..one, due to it being a good place to bolt the metal panels to and two, because it is so badly rusted that without replacing the pans and using a welder. I figured it would add a little integrity to these areas that are pretty shot. With this repair being bolted in opposed to welded it should flex pretty good...hehehe, instead of cracking the welds

with a little strip of street sign .. hehehe
http://www.supermotors.org/getfile/46753/original/QVLIN134.jpg

http://www.supermotors.org/getfile/46754/original/QVLIN136.jpg

Go go GHETTO!!! You may not have much recent wheelin' Damager, but I still remember the FOTM Damager Blitzkreig!!! :drinkbud

Good stuff so far... keep 'em comin' fellas. :thumbup

Okay, here we go.

My rig is a 90 Eddie Bauer that I've had just a little over a year, bought it bone stock. Here's what I've done to it so far, more or less in the order that I did it:

4" suspension lift
33" BFG AT's
dumped the sway bars front & rear
Rebuilt the 8.8 & installed Eaton E-Locker
Changed auto hubs to Warn premiums
Regeared to 4.56
Aussie locker installed in TTB D44
Dana 50 stub shaft
BroncoAir with 2.5 gallon tank
Built custom sliders
Installed a ridiculous electronics suite, including CD player, Sirius satelite radio, Garmin GPS, Streamlight rechargable flashlight, CB with outside PA speaker, small AC inverter, 3 jack DC power outlet, and a removable laptop stand. More electronic junk coming soon.

Here is the truck as it sits right this minute.
http://www.supermotors.org/getfile/242249/fullsize/DSCN2563.JPG
I'm in the process of bumping my lift from 4" to 6" using these new 6" coils and Sky shackle flip brackets.
http://www.supermotors.org/getfile/242243/fullsize/DSCN2567.JPG
Look how beefy these Sky brackets are. I love it.
http://www.supermotors.org/getfile/242247/fullsize/DSCN2556.JPG
I'm bumping the lift so I can fit these new meats, 36" TSLs. WOOT! :chili:
http://www.supermotors.org/getfile/242251/fullsize/DSCN2568.JPG

:popc1:

I'm bumping the lift so I can fit these new meats, 36" TSLs. WOOT! :chili:
http://www.supermotors.org/getfile/242251/fullsize/DSCN2568.JPG

hey those tires look familiar :toothless

phase 1 ... sawzalled and 35's with no lift :toothless

http://www.supermotors.org/getfile/46757/original/QVLIN166.jpg

http://www.supermotors.org/getfile/46759/original/QVLIN169.jpg

http://www.supermotors.org/getfile/46764/original/QVLIN183.jpg

man.. i dont have crap for pics of my rig :(

http://www.dana60.com/sceep/jod/38a.jpg
http://www.dana60.com/sceep/jod/5a.jpg
http://www.dana60.com/sceep/bigbronc/drivers.jpg
http://www.dana60.com/sceep/bigbronc/pass.jpg
http://www.dana60.com/sceep/a4f/gunnison/hoodrats.jpg

hey those tires look familiar :toothless

Many thanks, as you can see they're fixing to be put to good use. :thumbup
Hopefully I'll be rolling on them by Sunday.

Gotta love that boat anchor bumper

http://www.supermotors.org/getfile/46791/original/QVLIN209.jpg

and MAN, LOOK AT THAT FLEX YO!!

http://www.supermotors.org/getfile/46790/original/QVLIN208.jpg

http://www.supermotors.org/getfile/46789/original/QVLIN207.jpg

Here's some recent pictures.

http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Ruby%20Lake/July%2030,%202005/IMG_2468.jpg
http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Ruby%20Lake/July%2030,%202005/IMG_2472.jpg
http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Ruby%20Lake/July%2030,%202005/IMG_2477.jpg
http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Ruby%20Lake/July%2030,%202005/IMG_2499.jpg
http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Ruby%20Lake/July%2030,%202005/IMG_2503.jpg
http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Ruby%20Lake/July%2030,%202005/IMG_2517.jpg

cmon dave, you can fit the 36s with a 4". I know cause i did

Way to go, almost everyone is getting into the 'pimpin stage.. :beer :twotu: :chili: :chili: :chili:

We neeeed more pics and a whole lot more VOTES :toothless

Allcruisen :imp :usa

Had to go with Bronco85! One sweet rig. It was definately A tuff decision. Sixlitre gives some great advice and super tech tips. In the end I had to go with Bronco85. Keep it guys! :popc1:

tuggin' on a jeep

http://www.supermotors.org/getfile/85856/fullsize/100_0017.JPG

http://www.supermotors.org/getfile/85858/fullsize/100_0018.JPG

:popc1: :popc1: :popc1: :popc1: :popc1:

Too many good rigs this month. Gonna be a tough decision :wowcb:

Heres me at Uwharrie searching for landmines

http://www.supermotors.org/getfile/216930/fullsize/DSCN2158.JPG

http://www.supermotors.org/getfile/216931/fullsize/DSCN2163.JPG

http://www.supermotors.org/getfile/216947/fullsize/DSCN0702.JPG

http://www.supermotors.org/getfile/216965/fullsize/DSCF0014.JPG

Doing a burnout

http://www.supermotors.org/getfile/216951/fullsize/DSCN0705.JPG

http://www.supermotors.org/getfile/216948/fullsize/DSCN0704.JPG

I cant go to Uwharrie with out getting some 3 wheel action

http://www.supermotors.org/getfile/217934/fullsize/00750010.jpg

http://www.supermotors.org/getfile/218510/fullsize/00750009.jpg

http://www.supermotors.org/getfile/217935/fullsize/00750011.jpg

http://www.supermotors.org/getfile/216961/fullsize/DSCF0010.JPG

http://www.supermotors.org/getfile/216962/fullsize/DSCF0011.JPG

http://www.supermotors.org/getfile/216963/fullsize/DSCF0012.JPG

http://www.supermotors.org/getfile/216964/fullsize/DSCF0013.JPG

I voted for my boy sceep.

http://www.supermotors.org/getfile/217935/fullsize/00750011.jpg


Nice demonstration of the open front diff. :doh0715:

this
http://www.supermotors.org/getfile/46773/original/QVLIN172.jpg

http://www.supermotors.org/getfile/46774/original/QVLIN175.jpg

turned into this
http://www.supermotors.org/getfile/46776/original/QVLIN195.jpg


and eventually looked like this, every coupla weekends :twotu:

http://www.supermotors.org/getfile/85850/fullsize/100_0046_2.JPG

Nice demonstration of the open front diff. :doh0715:

Jealous :toothless

Marauder... you planning on lockers any time soon?

Not really. My fundage is gone. I would if I could but I just dont see it soon. Also, if I ever did a SAS and or replaced the rear axle then it would pretty much be a waste of my locker.

Not really. My fundage is gone. I would if I could but I just dont see it soon. Also, if I ever did a SAS and or replaced the rear axle then it would pretty much be a waste of my locker.
True. Is your rear open or LSD?

Open

Open
Ouch.

The stock lsd aint much better than being open

Ouch.

I guess? Makes it challenging.

Anyways back to pimping since I have 0 votes.

http://www.supermotors.org/getfile/216967/fullsize/DSCF0051.JPG

http://www.supermotors.org/getfile/218509/fullsize/00750007.jpg

An appropriate name for my rear bumper

http://www.supermotors.org/getfile/216323/fullsize/P1010580.JPG

http://www.supermotors.org/getfile/216324/fullsize/P1010581.JPG

15 PSI. Look at those suckers flex

http://www.supermotors.org/getfile/216348/fullsize/P1010590.JPG

Damage

Rock hook damage

http://www.supermotors.org/getfile/216349/fullsize/P1010594.JPG

I ruined my rear bumper :toothless

http://www.supermotors.org/getfile/216350/fullsize/P1010595.JPG

http://www.supermotors.org/getfile/216642/fullsize/P1010596.JPG

Nice pimpin so far Marauder!
Yeah, the open diff does add a nice challenge... kinda fun.
BTW... how do you like the procomp mt's?

Nice pimpin so far Marauder!
Yeah, the open diff does add a nice challenge... kinda fun.
BTW... how do you like the procomp mt's?

They seem good for a MT. Havent had any problems with them yet. I suspect things like a little bit of chunking out of the side tread is expected with them. I do spin them a lot on the trails. I really have nothing to compare them to though.

I did this because you guys hardly ever get to see it clean


Last Year it was Nice...... :thumbup
http://pics.montypics.com/ak4x4/2005-09-09/1126323614_napa_show_2004_003.jpg


but this year.... :twotu:
http://pics.montypics.com/ak4x4/2005-09-09/1126323478_family_m_g_2005_044.jpg

Bronco85 for FOTM

They seem good for a MT. Havent had any problems with them yet. I suspect things like a little bit of chunking out of the side tread is expected with them. I do spin them a lot on the trails. I really have nothing to compare them to though.
How's the wear?

Anyways back to pimping since I have 0 votes.


just wait, I might vote for you..........even if you dont have a solid front axle.

YUMMY!
http://www.supermotors.org/getfile/46816/original/QVLIN243.jpg

Installed in the snow
http://www.supermotors.org/getfile/46819/original/QVLIN242.jpg

http://www.supermotors.org/getfile/46820/original/QVLIN246.jpg

http://www.supermotors.org/getfile/46822/original/QVLIN248.jpg

Bolt is so damn rusty I can't get it out :banghead
http://www.supermotors.org/getfile/46823/original/QVLIN249.jpg

Had to cut the spring to get to it better
http://www.supermotors.org/getfile/46825/original/QVLIN251.jpg

http://www.supermotors.org/getfile/46827/original/QVLIN253.jpg

Damn thing won't budge .. had to cut it flush and DRILL IT OUT!
http://www.supermotors.org/getfile/46829/original/QVLIN255.jpg

http://www.supermotors.org/getfile/46831/original/QVLIN267.jpg

http://www.supermotors.org/getfile/46830/original/QVLIN256.jpg

Here we go
http://www.supermotors.org/getfile/46839/original/QVLIN284.jpg

http://www.supermotors.org/getfile/46840/original/QVLIN285.jpg

http://www.supermotors.org/getfile/46841/original/QVLIN286.jpg

Upsy daisy .. hehe
http://www.supermotors.org/getfile/46842/original/QVLIN299.jpg

Damager, I can't believe you did that in the snow! I lifted mine in a shop over three days, and I was absolutly hating life. The thought of doing another ttb lift makes me sick, let alone doing one outside in the snow. Let me guess, you didn't have air tools either did you? Either way, nice work

no air tools Bro .. straight up grunt work .... drilling that bolt out took about 25 drill bits and our good friend DOGONMUT was the one who sent me the new ones I needed to finish the job too!

Check this out .. fixing the rust in my bed .. yup, more snow! .. gotta do what ya gotta do when you don;t have a garage :toothless

http://www.supermotors.org/getfile/113221/fullsize/welding%20006.jpg

http://www.supermotors.org/getfile/113267/fullsize/DSCN0115.JPG

http://www.supermotors.org/getfile/113118/fullsize/DSCN0134.JPG

http://www.supermotors.org/getfile/113229/fullsize/welding%20007.jpg

http://www.supermotors.org/getfile/113269/fullsize/DSCN0116.JPG

http://www.supermotors.org/getfile/113119/fullsize/DSCN0135.JPG

http://www.supermotors.org/getfile/113120/fullsize/DSCN0137.JPG

I used 3/16 plate welded in to secure the roll cage to
http://www.supermotors.org/getfile/113121/fullsize/DSCN0136.JPG

http://www.supermotors.org/getfile/113230/fullsize/welding%20009.jpg

good first project for the welder
http://www.supermotors.org/getfile/113231/fullsize/welding%20012.jpg

http://www.supermotors.org/getfile/113233/fullsize/welding%20014.jpg

OUT with the Eddie Bauer crap .. hehehe
http://www.supermotors.org/getfile/113273/fullsize/DSCN0120.JPG

http://www.supermotors.org/getfile/113275/fullsize/DSCN0130.JPG

Then after that .. all purtied up :)
http://www.supermotors.org/getfile/116914/fullsize/interior%20paint%20002.jpg

http://www.supermotors.org/getfile/116915/fullsize/interior%20paint%20003.jpg

http://www.supermotors.org/getfile/116916/fullsize/interior%20paint%20004.jpg

http://www.supermotors.org/getfile/116917/fullsize/interior%20paint%20005.jpg

Some roll cage stuff

http://www.supermotors.org/getfile/81136/fullsize/101_0104.JPG

http://www.supermotors.org/getfile/81138/fullsize/101_0106.JPG

http://www.supermotors.org/getfile/81941/fullsize/101_0115.JPG

http://www.supermotors.org/getfile/81942/fullsize/101_0116.JPG

http://www.supermotors.org/getfile/81943/fullsize/101_0117.JPG

http://www.supermotors.org/getfile/81945/fullsize/101_0119.JPG

http://www.supermotors.org/getfile/81949/fullsize/101_0123.JPG

http://www.supermotors.org/getfile/81951/fullsize/101_0125.JPG

http://www.supermotors.org/getfile/81954/fullsize/101_0128.JPG

http://www.supermotors.org/getfile/81956/fullsize/101_0130.JPG

http://www.supermotors.org/getfile/81957/fullsize/101_0131.JPG

http://www.supermotors.org/getfile/122322/fullsize/cage%20handles%20004.jpg

http://www.supermotors.org/getfile/122324/fullsize/cage%20handles%20006.jpg

http://www.supermotors.org/getfile/146147/fullsize/cage%20supports%20001.jpg

http://www.supermotors.org/getfile/146148/fullsize/cage%20supports%20004.jpg

http://www.supermotors.org/getfile/146149/fullsize/cage%20supports%20005.jpg

Had to put this 3/16 plate down to support the center tubes
http://www.supermotors.org/getfile/146150/fullsize/cage%20supports%20006.jpg

http://www.supermotors.org/getfile/146152/fullsize/cage%20supports%20008.jpg

http://www.supermotors.org/getfile/147479/fullsize/cage%20supports%20011.jpg

http://www.supermotors.org/getfile/147481/fullsize/cage%20supports%20019.jpg

http://www.supermotors.org/getfile/147483/fullsize/cage%20supports%20020.jpg

http://www.supermotors.org/getfile/147484/fullsize/cage%20supports%20023.jpg

When I tie it into the frame it will look like this
http://www.supermotors.org/getfile/147486/fullsize/cage%20supports%20016.jpg

http://www.supermotors.org/getfile/226306/fullsize/July%2017%202005%20001.jpg

http://www.supermotors.org/getfile/226307/fullsize/July%2017%202005%20004.jpg

I usually dont like to vote for forigners of trucks with TTB, but I might have to give Damager my vote, he is doing the best whoring.....so far.

Thanks Mike .. I am not too confident in winning .. when Bronco85 starts it will be all over .. the mud and the Alask background will win the votes, unless anybody cares about the work I have done myself

I appreciate the consideration though :thumbup

http://www.supermotors.org/getfile/142873/fullsize/chaline%2082%20(1).jpg

http://www.supermotors.org/getfile/103555/original/never2.gif

:stupid

I care bro... dats why ya gots my nomination! :thumbup

Havn't had time to pimp much so far, my pimp hand has been out wrenching until the wee hours the last few nights. My neighbors all love the sound of an impact wrench at 1 AM. Sufice it to say that no project ever turns out as simple as you had hoped it would be. I didn't get her rolling on her newly lifted suspension as I had hoped this weekend, but here are some pics from Tellico to hold us over.

I seriously thought I was going to flop her over here, this pic was taken on the way back down. :doh0715:
http://www.supermotors.org/getfile/184377/fullsize/6772730-R2-032-14A.jpg
Just deep enough to be fun.
http://www.supermotors.org/getfile/184385/fullsize/6772730-R3-028-12A.jpg
http://www.supermotors.org/getfile/183481/fullsize/DSCN1805.JPG
This was the last wheeling trip those nerf bars got to enjoy. They were mercilessly trashed at Uwharrie shortly after this.
http://www.supermotors.org/getfile/184381/fullsize/6772730-R2-048-22A.jpg
http://www.supermotors.org/getfile/184379/fullsize/6772730-R2-038-17A.jpg

omg how many dam pics are on this page? :shocked

Here are some for Bronco85 since he is busy playin hide the sausage this weekend :popc1: ...J/K Phill

http://pics.montypics.com/ak4x4/2005-08-06/1123403358_wishbone_8_8_05_013.jpg

http://pics.montypics.com/ak4x4/2005-08-06/1123403499_wishbone_8_8_05_021.jpg

http://pics.montypics.com/ak4x4/2004-08-01/1091351923_napa_show_2004_024.jpg

3 Stages of Bronco
http://pics.montypics.com/ak4x4/2005-07-30/1122782717_brat_m_g_05_032.jpg

I had to give one to Marauder, just cause it's what I would like to drive. Good trail pics too. :twotu:

Damager, that ghetto garage is hardcore buddy. That almost swayed my vote alone. :thumbup

Damager, that ghetto garage is hardcore buddy. That almost swayed my vote alone. :thumbup

hehehe.. gotta make due with what ya got my friend :toothless

my first run after the lift
http://www.supermotors.org/getfile/46867/fullsize/100_0005_2.JPG

http://www.supermotors.org/getfile/46869/fullsize/100_0007_2.JPG

and it got me this
http://www.supermotors.org/getfile/46891/fullsize/100_0001_3.JPG

http://www.supermotors.org/getfile/46892/fullsize/100_0040.JPG

http://www.supermotors.org/getfile/46893/fullsize/100_0036.JPG

Opps someone forgot to tighten his U-bolts :) I hate it when that happens.

damn blocks suck da nuts .. spit them out TWICE on the same trail .. went home and removed them altogether .. only have 2 add a leafs in there now

Misc. Pictures from last year.

http://www.supermotors.org/getfile/132446/fullsize/B-29b.JPG

http://www.supermotors.org/getfile/133574/fullsize/CHURCHILL-PURCHES%20021.jpg

http://www.supermotors.org/getfile/135116/fullsize/IMG_1925.JPG

http://www.supermotors.org/getfile/135121/fullsize/IMG_1952.JPG

http://www.supermotors.org/getfile/135123/fullsize/IMG_1956.JPG

http://www.supermotors.org/getfile/139996/fullsize/IMG_1742.JPG

http://www.supermotors.org/getfile/139997/fullsize/IMG_1757.JPG

http://www.supermotors.org/getfile/139998/fullsize/IMG_1761.JPG

http://www.supermotors.org/getfile/85854/fullsize/100_0001.JPG

http://www.supermotors.org/getfile/85855/fullsize/100_0019.JPG

Since Dave went with the Tellico pics, I will add mine in from a seperate trip where I got to meet Oscar and Bobby. I never thought I would get too meet Oscar :thumbup

Poser shots on Trail #1

http://www.supermotors.org/getfile/151462/fullsize/P1010032.JPG

http://www.supermotors.org/getfile/151481/fullsize/P1010041.JPG

http://www.supermotors.org/getfile/151482/fullsize/P1010042.JPG

http://www.supermotors.org/getfile/151488/fullsize/P1010048.JPG

It was a miricle I ever met up with Oscar and Bobby (somewhat long story)

http://www.supermotors.org/getfile/151487/fullsize/P1010047.JPG

http://www.supermotors.org/getfile/151873/fullsize/t638.jpg

http://www.supermotors.org/getfile/151874/fullsize/t644.jpg

http://www.supermotors.org/getfile/151876/fullsize/t645.JPG

http://www.supermotors.org/getfile/151877/fullsize/t646.jpg

Bobby, making sure I am having a good time. Unfortunatly my mom, who was riding with me, did not share the same sentament.

http://www.supermotors.org/getfile/151878/fullsize/t647.jpg

http://www.supermotors.org/getfile/151506/fullsize/P1010063.JPG

http://www.supermotors.org/getfile/152815/fullsize/117-1761_IMG.JPG

http://www.supermotors.org/getfile/151885/fullsize/t660.JPG

http://www.supermotors.org/getfile/152816/fullsize/117-1762_IMG.JPG

Talking to Oscar

http://www.supermotors.org/getfile/152565/fullsize/117-1752_IMG.JPG

http://www.supermotors.org/getfile/151507/fullsize/P1010064.JPG

http://www.supermotors.org/getfile/151883/fullsize/t657.jpg

http://www.supermotors.org/getfile/151882/fullsize/t655.jpg

http://www.supermotors.org/getfile/152566/fullsize/117-1758_IMG.JPG

http://www.supermotors.org/getfile/151887/fullsize/t675.JPG

http://www.supermotors.org/getfile/151509/fullsize/P1010066.JPG

http://www.supermotors.org/getfile/151511/fullsize/P1010068.JPG

Wow my front passenger fender still in mint condition. I have gotten so used to it smashed up since one of the Uwharrie trips.

http://www.supermotors.org/getfile/151513/fullsize/P1010070.JPG

http://www.supermotors.org/getfile/152817/fullsize/117-1765_IMG.JPG

http://www.supermotors.org/getfile/151524/fullsize/P1010077.JPG

My mom is so happy in this picture because we are done wheeling.

http://www.supermotors.org/getfile/151888/fullsize/t679.jpg

Didnt get many awesome action pics. We were really cruising through stuff without stopping.

Damager... I remember that you used to have in your sig(or at least I think it was you) "A $500 project being totally rebuilt a little at a time"...
Whats the project total at now?

Gotta go with Damager this month, with Bronco85 a damn close second... Good job goes out to all you guys though :twotu:

i voted for andy cause he is cool and like me doesnt care what other people think about him

wes

Damager... I remember that you used to have in your sig(or at least I think it was you) "A $500 project being totally rebuilt a little at a time"...
Whats the project total at now?

probably 6 grand or so :shrug

Gotta go with Damager this month, with Bronco85 a damn close second... Good job goes out to all you guys though :twotu:


Thanks Bro :beer :rockon

Here are my swaybars .. DISPOSED OF PROPERLY!

http://www.supermotors.org/getfile/81654/fullsize/101_0109.JPG

http://www.supermotors.org/getfile/81655/fullsize/101_0110.JPG

http://www.supermotors.org/getfile/81656/fullsize/101_0112.JPG

All ready for the garbage man :rofl:

http://www.supermotors.org/getfile/81657/fullsize/101_0113.JPG

Here is one of the main reasons I installed the cage

http://www.supermotors.org/getfile/85912/fullsize/100_0057.JPG

http://www.supermotors.org/getfile/85913/fullsize/100_0058.JPG

http://www.supermotors.org/getfile/85914/fullsize/100_0059.JPG

Here is one of the main reasons I installed the cage

http://www.supermotors.org/getfile/85912/fullsize/100_0057.JPG

http://www.supermotors.org/getfile/85913/fullsize/100_0058.JPG

http://www.supermotors.org/getfile/85914/fullsize/100_0059.JPG
Did you buy the cage direct from the S&W site?

yup, came notched too .. very sweet deal

http://www.supermotors.org/getfile/81137/fullsize/101_0105.JPG

http://www.supermotors.org/getfile/81136/fullsize/101_0104.JPG

Had to Vote earlier then I usually do.... Decided on Damager... he's been around long enough and deserves a "W" Plus hes a great guy!

Wow this is a close one, with 14 votes apiece right now for Damager and Bronco85.

Looks like someone is gonna have to show some skin to win. :boxing :popc1:

Wow this is a close one,
Looks like someone is gonna have to show some skin to win. :boxing :popc1:



Ya mean like this? :twotu:

http://www.supermotors.org/getfile/83722/fullsize/myliii.gif

here are some goodies I have that need the balance of $$$ to complete

Sterling 10.25 with 4:10 gears

http://www.supermotors.org/getfile/126619/original/axle%20005.jpg
Came out of this F250

http://www.supermotors.org/getfile/46844/original/QVLIN303.jpg

it was sunk in the mud
http://www.supermotors.org/getfile/46845/original/QVLIN304.jpg

High lift sunk and *SPLAT*
http://www.supermotors.org/getfile/46846/original/QVLIN305.jpg

pretty messy under there .. what a fun removal
http://www.supermotors.org/getfile/46847/original/QVLIN306.jpg

gotta use the firewood to prop it .. hahaha
http://www.supermotors.org/getfile/46848/original/QVLIN307.jpg

http://www.supermotors.org/getfile/46849/original/QVLIN308.jpg

Got some doors too!
http://www.supermotors.org/getfile/46850/original/QVLIN309.jpg

all ready and prepped for paint.. it is painted black now

http://www.supermotors.org/getfile/126627/fullsize/axle%20020.jpg

Here are some for Bronco85 since he is busy playin hide the sausage this weekend :popc1: ...J/K Phill
http://pics.montypics.com/ak4x4/2005-08-06/1123403499_wishbone_8_8_05_021.jpg


Looks like he found the sausage, the biscuits, gravy, eggs, etc.... :goodfinge

I usually dont like to vote for forigners of trucks with TTB, but I might have to give Damager my vote, he is doing the best whoring.....so far.

Hey now! He's not a forigner...just a misplaced AMERICAN :thumbup
You've done Hella work on your rig over the years Damager! :beer Wish I had the ability and tools available to do what you have done, but that won't happen unless I marry some guy who has it already! :doh0715:

It was a miricle I ever met up with Oscar and Bobby (somewhat long story)

Bobby, making sure I am having a good time. Unfortunatly my mom, who was riding with me, did not share the same sentament.

We always love long stories! :thumbup And as far as your mom, at least she had the guts to go out and experiance first hand what her son loves to do and spent the day with you :thumbup Even though she may never do it again :toothless LOL

Looks like he found the sausage, the biscuits, gravy, eggs, etc.... :goodfinge

That wasn't very nice at all...

But I yes I found it all.. And it was all good :chili: :twotu:

Looks like he found the sausage, the biscuits, gravy, eggs, etc.... :goodfinge
That wasn't necessary. If you have comments like that you'd be better to keep them to yourself.

Here are my sliders

http://www.supermotors.org/getfile/117147/fullsize/sliders%20001.jpg

First installed the 2x3 under the door sills tucked up tight
http://www.supermotors.org/getfile/117148/fullsize/sliders%20002.jpg

http://www.supermotors.org/getfile/117149/fullsize/sliders%20003.jpg

http://www.supermotors.org/getfile/117151/fullsize/sliders%20005.jpg

Then added the rails for protection
http://www.supermotors.org/getfile/128493/fullsize/sliders.jpg

http://www.supermotors.org/getfile/129619/fullsize/sliders%20007.jpg

http://www.supermotors.org/getfile/129621/fullsize/sliders%20009.jpg

http://www.supermotors.org/getfile/129622/fullsize/sliders%20010.jpg

damager's killing it with the pic whoring! keep it up and you might just get my vote :thumbup

i want to see some got damn action!

My vote went to Axe. some pics up man. :thumbup

damager's killing it with the pic whoring!

no schit!! lol.. i could re-post all my build pics but i thought that would be a little overkill, thats why i linked the origional threads.

http://www.bensprouse.com/images/smilies/nutkick.gif

i want to see some got damn action!


Try these :toothless

http://www.supermotors.org/getfile/128599//Chaline%20Valley%20june%2013%20002.avi

http://www.supermotors.org/getfile/128601//Chaline%20Valley%20june%2013%20005.avi

New action pictures to come when I get home tonight :) Want to see some 38s buried in the mud :) I know ya all do... Stay tuned.

Damager, have you previously won a FOTM?

do your research son :doh0715:

Damager oct 2003

Bronco85 Sept 2004

doesn't look like it, but this is pretty steep .. awesome TTB flex...hahaha

http://www.supermotors.org/getfile/46897/fullsize/100_0019_2.JPG

http://www.supermotors.org/getfile/46898/fullsize/100_0020_2.JPG

http://www.supermotors.org/getfile/225084/fullsize/July%2017%202005%20003.jpg

http://www.supermotors.org/getfile/128760/fullsize/Chaline%20Valley%20june%2013.jpg

85 is gonna kick my ass .. I don't have much left, almost all that I have done with the winch this summer has had no photos :doh0715:

Here are some Tech pictures.

I pulled a Damager and spit my blocks out on the trail. Here where the results when I got home.

Before shackle FLip
http://www.supermotors.org/getfile/82675/fullsize/IMG_1261.JPG
After
http://www.supermotors.org/getfile/82679/fullsize/IMG_1273.JPG

SAS The beginning
http://www.supermotors.org/getfile/107448/fullsize/IMG_1552.JPG
http://www.supermotors.org/getfile/113442/fullsize/IMG_1587.JPG
http://www.supermotors.org/getfile/114459/fullsize/IMG_1602.JPG
http://www.supermotors.org/getfile/115462/fullsize/IMG_1609.JPG
http://www.supermotors.org/getfile/118789/fullsize/IMG_1625.JPG

Flex :)
Before SAS
http://www.supermotors.org/getfile/118562/fullsize/PreSAS03.JPG
After
http://www.supermotors.org/getfile/118565/fullsize/AfterSAS02.JPG
http://www.supermotors.org/getfile/118566/fullsize/AfterSAS03.JPG
http://www.supermotors.org/getfile/118567/fullsize/AfterSAS05.JPG

Bring it on Ricer boys :)
http://www.supermotors.org/getfile/118569/fullsize/IMG_1637.JPG
http://www.supermotors.org/getfile/118570/fullsize/IMG_1638.JPG
http://www.supermotors.org/getfile/118572/fullsize/IMG_1639.JPG

RElay panel
http://www.supermotors.org/getfile/123045/fullsize/Relay%20panel.JPG

Dual batteries.
http://www.supermotors.org/getfile/123044/fullsize/Together.JPG

EFI :)
http://www.supermotors.org/getfile/188018/fullsize/EFI%20-%20Full.JPG
http://www.supermotors.org/getfile/188017/fullsize/EFI%20-%20Computer.JPG
http://www.supermotors.org/getfile/188021/fullsize/EFI%20-%20Modules.JPG

New dash panel
http://www.supermotors.org/getfile/189768/fullsize/IMG_2330.JPG

Thats all I have for recent tech stuff. Most of what I have it pre-EFI and it's no longer on the bronco because the parts don't work with EFI.

c'mon 85 im waitin for your 38's coverd in mud :popc1:

ok here's a couple teasers.. From Labor Day weekend.

This hole Broke my hub on day one.. Stuff looked like Peanut Butter, Nice and thick stuff.
http://www.supermotors.org/getfile/244226/fullsize/yuk.JPG

Way doing donuts by this little pond and well I fell into to the soft nasty stuff. My girlfreind seemed like she was enjoying this, but personally I think it was a fake smile for my sake :twak
http://www.supermotors.org/getfile/244227/original/yuk2.JPG

Dive Dive!!!!!! I thought I could drive this hole.. I Was wrong :popc1:
http://www.supermotors.org/getfile/244232/original/yuk3.JPG

damn cool rigs guys. That dash is awsome 85. And gotta say damager, I think it is bad ass your whole bronco is chopped, but you have the stock seats. Idunno why. Seriously though, sweet BKOs guys. Marauder, way to get you mom out there. When I tried to talk my mom into it, she offered to let me drive her around in her 57 chevy instead. Didn't work, got to take her on tour of her new land w/ no roads she just bought and is retiring to in the next few months. Keep it rocking guys, giving me all kinds of crazy ideas.

Yay, I get to get creative with the new welder :drinkbud

http://www.supermotors.org/getfile/124849/fullsize/half%20door%20001.jpg

http://www.supermotors.org/getfile/124850/fullsize/half%20door%20002.jpg

My 4 yr old sone took these while daddy was "werkin' on da Bonco" <-from 2 yr old :twotu:

http://www.supermotors.org/getfile/124851/fullsize/half%20door%20004.jpg

http://www.supermotors.org/getfile/124852/fullsize/half%20door%20005.jpg

welded 1x1 square tubing in there for structural integrity

http://www.supermotors.org/getfile/124853/fullsize/half%20door%20006.jpg

http://www.supermotors.org/getfile/124854/fullsize/half%20door%20007.jpg

press to fit

http://www.supermotors.org/getfile/124855/fullsize/half%20door%20008.jpg

http://www.supermotors.org/getfile/124857/fullsize/half%20door%20010.jpg

http://www.supermotors.org/getfile/124858/fullsize/half%20door%20011.jpg

http://www.supermotors.org/getfile/124859/fullsize/half%20door%20012.jpg

http://www.supermotors.org/getfile/124860/fullsize/half%20door%20014.jpg

http://www.supermotors.org/getfile/124862/fullsize/half%20door%20017.jpg

When I used to live in Colorado .. this is up Tiger Rd outside of Breckenridge (SPAM) :rockon

http://www.supermotors.org/getfile/126014/fullsize/half%20door%20020.jpg

http://www.supermotors.org/getfile/126014/fullsize/half%20door%20020.jpg

http://www.supermotors.org/getfile/126017/fullsize/half%20door%20025.jpg

http://www.supermotors.org/getfile/126019/fullsize/half%20door%20026.jpg

do your research son :doh0715:

Damager oct 2003

Bronco85 Sept 2004

this isn't the sas forum bro, a simple yes or no was all i was looking for... :whiteflag

and i'm well aware of bronco85's win, he kicked my azz with all his whoring...(yet another 2nd place finish for me on that one).

i guess i'll have to sit tight and weigh my vote a little more

this isn't the sas forum bro, a simple yes or no was all i was looking for... :whiteflag

i guess i'll have to sit tight and weigh my vote a little more

Sounds like hes leanin towards BKO85 :rofl:

Its the race this month. I hope its dead locked the whole month :twotu:

Sounds like hes leanin towards BKO85 :rofl:

:twotu:


why would he wanna vote that way ..there is time for payback at hand voting for me :histerica

Some pics of the winch install

http://www.supermotors.org/getfile/150839/fullsize/Winch%20Install%20020.jpg

http://www.supermotors.org/getfile/151637/fullsize/Winch%20Install%20022.jpg

http://www.supermotors.org/getfile/151638/fullsize/Winch%20Install%20023.jpg

Had to cut this out
http://www.supermotors.org/getfile/151639/fullsize/Winch%20Install%20024.jpg

Here is my quality control inspector
http://www.supermotors.org/getfile/151640/fullsize/Winch%20Install%20026.jpg

That is a piece of 1/4" angle iron .. no need for pricey "monting plates" .. hehe, $30 complete with hardware
http://www.supermotors.org/getfile/151641/fullsize/Winch%20Install%20027.jpg

I cut the grill out to fit it snugly in there
http://www.supermotors.org/getfile/152923/fullsize/Winch%20Install%20029.jpg

http://www.supermotors.org/getfile/152924/fullsize/Winch%20Install%20028.jpg

http://www.supermotors.org/getfile/154669/fullsize/Winch%20Install%20030.jpg

http://www.supermotors.org/getfile/154670/fullsize/Winch%20Install%20031.jpg

http://www.supermotors.org/getfile/154671/fullsize/Winch%20Install%20032.jpg

Here are my test crew :twotu:

http://www.supermotors.org/getfile/157931/fullsize/Winch%20Install%20034.jpg

http://www.supermotors.org/getfile/157933/fullsize/Winch%20Install%20035.jpg

http://www.supermotors.org/getfile/157934/fullsize/Winch%20Install%20036.jpg

and out in the field, stuck in a ravine
http://www.supermotors.org/getfile/235303/fullsize/Aug%207%202005%20fishing.jpg

Dang it stop showing all those cool winch pictures.. And it's not fair to show your son.. Your getting all the Votes from people that think your sons cute :)

It's going to be a good race this month... Lots of good rigs in the running!! Have 2 of the same style broncos ever gone 1-2 in the voting?

http://www.supermotors.org/getfile/147577/original/untitled.jpg :goodfinge

Awww man. I should just admit defeat now :(

Wait I have some freinds with cute kids. And they like my bronco.. I will have to get them to pose with it :)

Is your youngest hanging his head in shame because you still have a TTB? :P

Is your youngest hanging his head in shame because you still have a TTB? :P


hahaha most likely Bro ... he is happy that he gets to play in the mud though :thumbup

Any one got more Muddin pics or Flexin pics

This is how I wash the truck :)

http://www.supermotors.org/getfile/142972/fullsize/wash%20003.jpg

http://www.supermotors.org/getfile/142975/fullsize/wash%20006.jpg

http://www.supermotors.org/getfile/142870/fullsize/chaline%2082.jpg

here is a little video of the mud above.. looks like absolutely nothing, but sinking about 10-12 inches in sofy clay made it really greasy .. you can see the tracks and how deep it was sinking since that pic was a second run through

http://www.supermotors.org/getfile/142879//chaline%2082%20(4).avi



.

My buddy got a frog here :thumbup

You can see it jumping out of his hand

http://www.supermotors.org/getfile/127386/fullsize/chaline%20jul6%2004%20002.jpg

Caught in the ruts .. how sad not being locked .. hahaha, Boggers would have helped

http://www.supermotors.org/getfile/127388/fullsize/chaline%20jul6%2004%20004.jpg

http://www.supermotors.org/getfile/127389/fullsize/chaline%20jul6%2004%20005.jpg

Any one got more Muddin pics or Flexin pics

Here is some "onboard" video of driving a fullsize on jeep trails ... hehehe, whoever is afraid of pinstrides need not apply

http://www.supermotors.org/getfile/127444//chaline%20jul6%2004%20012.avi


Keep your eye on the rear view and be sure you have the sound on

This is what it's all about for my co-pilot :twotu:

http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Sheep%20Creek/August%2009-10,%202003/bigimages/IMG_0751.jpg
http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Sheep%20Creek/August%2009-10,%202003/bigimages/IMG_0753.jpg
http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Sheep%20Creek/August%2009-10,%202003/bigimages/IMG_0755.jpg
http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Sheep%20Creek/August%2009-10,%202003/bigimages/IMG_1206.jpg
http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Sheep%20Creek/August%2009-10,%202003/bigimages/IMG_1208.jpg

My damager impression - these are the parts I found.
http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Sheep%20Creek/August%2009-10,%202003/bigimages/IMG_1240.jpg
http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Sheep%20Creek/August%2009-10,%202003/bigimages/IMG_1242.jpg

Ack TTB !!!!
http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Sheep%20Creek/August%2009-10,%202003/bigimages/IMG_1248.jpg
http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Sheep%20Creek/August%2009-10,%202003/bigimages/IMG_1248.jpg

Cleaning the undercarrage anyone?
http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Sheep%20Creek/August%2009-10,%202003/bigimages/IMG_1254.jpg
http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Sheep%20Creek/August%2009-10,%202003/bigimages/IMG_1257.jpg

Wheelin in Alaska. You either Love it or ya don't have a clue!
http://users.superford.org/bronco85/PAGES/OFF-ROAD-TRIPS/Sheep%20Creek/August%2009-10,%202003/bigimages/IMG_1252.jpg

the picture of you in the stream. LOL the water just turns brown.

phill u need a D60

the picture of you in the stream. LOL the water just turns brown.

:stupid it looks like your truck has the mexican trots

:stupid it looks like your truck has the mexican trots



hahaha .. RUNNYASS85 :histerica


Gotta hand it to ya man .. I wish I had that stuff to play in :thumbup

http://www.supermotors.org/getfile/85245/fullsize/FOTM.gif

Phill has a faithful following...but goes overboard with the recovery equipment

http://pics.montypics.com/ak4x4/2005-09-14/1126764212_family_pics_for_phill.jpg

hell we snap chain like that all the time here....someone rips it out and the lot of us scramble and get the hell out of there!!!!

Here is some "onboard" video of driving a fullsize on jeep trails ... hehehe, whoever is afraid of pinstrides need not apply

http://www.supermotors.org/getfile/127444//chaline%20jul6%2004%20012.avi


Keep your eye on the rear view and be sure you have the sound on

This is what it's all about for my co-pilot :twotu:


Thats a great little vid, Damager. If that hood was brown, I'd swear that was one of my trips

Phill has a faithful following...but goes overboard with the recovery equipment

http://pics.montypics.com/ak4x4/2005-09-14/1126764212_family_pics_for_phill.jpg

Overboard? Hell what I carry now is only about half of what I want to be carring. Everything I have has been broken by a member of my club at 1 time or another.

And I wouldn't need recovery equipment if your Sami and bronco would make it up and down the trails.

I pulled my winch cable probably 25-30 times over labor day weekend. And maybe 5 times was for me :beer

Vote Bronco85... The runnyazz over prepared bronco guy! :whiteflag

Teaching my son to weld last summer .. he was 4

that is a piece of my door cut out for the half doors and he is welding a piece of coat hanger onto it :rockon

http://www.supermotors.org/getfile/147668/fullsize/Will%20Welding.jpg

Playing tow truck for a stuck zuk

http://www.supermotors.org/getfile/88290/fullsize/100_0006.JPG

http://www.supermotors.org/getfile/88291/fullsize/100_0007.JPG

on board
http://www.supermotors.org/getfile/88293/fullsize/100_0009.JPG

More zuks need help

http://www.supermotors.org/getfile/88295/fullsize/100_0011.JPG

http://www.supermotors.org/getfile/88296/fullsize/100_0012.JPG

very typical of the terrain I run

http://www.supermotors.org/getfile/88303/fullsize/100_0014.JPG

My bud

http://www.supermotors.org/getfile/88305/fullsize/100_0019.JPG

coming over the top
http://www.supermotors.org/getfile/88614/fullsize/IM000931sm.jpg

http://www.supermotors.org/getfile/88616/fullsize/IM000974sm.jpg

Getting ready to pull him out

http://www.supermotors.org/getfile/88617/fullsize/IM000978sm.jpg

Going through what he got stuck in

http://www.supermotors.org/getfile/88833/fullsize/IM000970sm.jpg

and my Buddy on the right

http://www.supermotors.org/getfile/88832/fullsize/DSCF2010.JPG

Playing tow truck for a stuck zuk

http://www.supermotors.org/getfile/88290/fullsize/100_0006.JPG

http://www.supermotors.org/getfile/88291/fullsize/100_0007.JPG

on board
http://www.supermotors.org/getfile/88293/fullsize/100_0009.JPG

More zuks need help

http://www.supermotors.org/getfile/88295/fullsize/100_0011.JPG

http://www.supermotors.org/getfile/88296/fullsize/100_0012.JPG

very typical of the terrain I run

http://www.supermotors.org/getfile/88303/fullsize/100_0014.JPG

My bud

http://www.supermotors.org/getfile/88305/fullsize/100_0019.JPG

coming over the top
http://www.supermotors.org/getfile/88614/fullsize/IM000931sm.jpg

http://www.supermotors.org/getfile/88616/fullsize/IM000974sm.jpg

Getting ready to pull him out

http://www.supermotors.org/getfile/88617/fullsize/IM000978sm.jpg

Going through what he got stuck in

http://www.supermotors.org/getfile/88833/fullsize/IM000970sm.jpg

and my Buddy on the right

http://www.supermotors.org/getfile/88832/fullsize/DSCF2010.JPG
excelent pics.

Teaching a 4 year old how to weld.... Farking cool!!! :twotu:

One more for damager!

Yeah baby .. hook up a little brutha .. he'll be psyched if daddy and "Da Bonco" win

Here he is with the grinder when I raised my gas tank into the bed (I will post those pics later) ... He actually helped me weld the hinges on the steel box that I built there :thumbup

http://www.supermotors.org/getfile/194898/fullsize/Gas%20Tank%20Cover%20006.jpg

http://www.supermotors.org/getfile/194899/fullsize/Gas%20Tank%20Cover%20007.jpg

Teaching a 4 year old how to weld.... Farking cool!!! :twotu:

:lolup That just shows "Your never too young to work on your Bronco"......

Those are some awesome pics, Damager.....

I am not gonna say who gets my VOTE, but I would give ya a hint. Its a member teaching a 4 year old how to weld....:smokin: :histerica :histerica :histerica

KEEP THOSE PICTURES COMING AND LETS KEEP HAVING FUN!

Allcruisen :imp :usa

I think I'm gonna give my vote to Damager. I aint voted yet, but I think thats where its going

Damager got my vote :thumbup Nice work on the truck :chili:
Bronco85 gave him a run for the money tho!! :rockon

Damager got my vote. It was close this month; ya got Marauder simply cause he takes mom wheelin' :beer , Ya got Bronco85 who's got a sweet rig and uses it for what it's intended for :beer , and then ya got Damager, who has a sweet rig, takes his kid wheelin' and teaches him how to work on his own rig, and works on his rig in the snow (been there/no fun) :beer :beer .

THANKS!! I got my son working on HIS truck in the snow too!!!! .. again this is when he was 4

DAT'S MY BOY! :rockon

http://www.supermotors.org/getfile/104521/fullsize/jan%2031%20005.jpg

http://www.supermotors.org/getfile/104523/fullsize/jan%2031%20007.jpg

http://www.supermotors.org/getfile/104524/fullsize/jan%2031%20008.jpg

Does anyone have any new pics?

I guess if Damager FOTM this month it will be Father of the Month :toothless

My little one would help me work on the Bronco, but she got all girly on me now. She'll go wheeling, but wants nothing to do with working on it now :cry

bronco85 and Damager nice pic whoring but everyone else not so good.

It's been a fun race this month. I just havn't had much time at all to whore. Since I'm leaving for a business trip tonight I prolly wont get anymore up for atleast a week. By then I assume Damager will have a commanding leaving on me :(

On a good note. I convinced my Girlfreind that she should help me fix my bronco and modify it this winter. Prolly Rhino line is and a little tube work for the fenders..

Here is the a combination of items done this spring.. Raised gas tank/ inverted trailer hitch/tow point and custom bumper ... customised push bar to accomodate winch as well

http://www.supermotors.org/getfile/188410/fullsize/Gas%20Tank%20Tow%20Hitch%20Bumper%20001.jpg

out with the gas tank
http://www.supermotors.org/getfile/188412/fullsize/Gas%20Tank%20Tow%20Hitch%20Bumper%20003.jpg

http://www.supermotors.org/getfile/188413/fullsize/Gas%20Tank%20Tow%20Hitch%20Bumper%20004.jpg

out with the cross member
http://www.supermotors.org/getfile/188414/fullsize/Gas%20Tank%20Tow%20Hitch%20Bumper%20005.jpg

trim the hitch to fit between frame rails upside down
http://www.supermotors.org/getfile/188415/fullsize/Gas%20Tank%20Tow%20Hitch%20Bumper%20006.jpg

lots of clearance gained by doing this
http://www.supermotors.org/getfile/188416/fullsize/Gas%20Tank%20Tow%20Hitch%20Bumper%20007.jpg

tucked in there
http://www.supermotors.org/getfile/188418/fullsize/Gas%20Tank%20Tow%20Hitch%20Bumper%20009.jpg

http://www.supermotors.org/getfile/188419/fullsize/Gas%20Tank%20Tow%20Hitch%20Bumper%20010.jpg

cut the bed
http://www.supermotors.org/getfile/188420/fullsize/Gas%20Tank%20Tow%20Hitch%20Bumper%20011.jpg

where it will be..LOTS of clearance now!
http://www.supermotors.org/getfile/188421/fullsize/Gas%20Tank%20Tow%20Hitch%20Bumper%20012.jpg

cut hole for fuel lines
http://www.supermotors.org/getfile/188422/fullsize/Gas%20Tank%20Tow%20Hitch%20Bumper%20013.jpg

cut pieces of 1x1 angle iron to place tank and support
http://www.supermotors.org/getfile/188424/fullsize/Gas%20Tank%20Tow%20Hitch%20Bumper%20015.jpg

http://www.supermotors.org/getfile/188423/fullsize/Gas%20Tank%20Tow%20Hitch%20Bumper%20014.jpg

push bar modification
http://www.supermotors.org/getfile/189706/fullsize/Bumper%20&%20Pushbar%20002.jpg

weld caps on
http://www.supermotors.org/getfile/189707/fullsize/Bumper%20&%20Pushbar%20004.jpg

http://www.supermotors.org/getfile/189708/fullsize/Bumper%20&%20Pushbar%20011.jpg

2x2 square tubing with 1x1 for strength for bumper
http://www.supermotors.org/getfile/189712/fullsize/Bumper%20&%20Pushbar%20008.jpg

test run
http://www.supermotors.org/getfile/189713/fullsize/Bumper%20&%20Pushbar%20009.jpg

welds
http://www.supermotors.org/getfile/189714/fullsize/Bumper%20&%20Pushbar%20014.jpg

I mounted the bumper and welded it to the hitch
http://www.supermotors.org/getfile/189716/fullsize/Bumper%20&%20Pushbar%20017.jpg

http://www.supermotors.org/getfile/189717/fullsize/Bumper%20&%20Pushbar%20019.jpg

a little paint helps
http://www.supermotors.org/getfile/189718/fullsize/Bumper%20&%20Pushbar%20020.jpg

luckily this time around I had access to a garage :)
http://www.supermotors.org/getfile/189719/fullsize/Bumper%20&%20Pushbar%20021.jpg

I gutted the tailgate too so I could eliminate more weight
http://www.supermotors.org/getfile/194895/fullsize/Gas%20Tank%20Cover%20002.jpg

trimmed the bottom so it would rest snug on the top of the bumper
http://www.supermotors.org/getfile/194896/fullsize/Gas%20Tank%20Cover%20003.jpg

had to hard mount it..more 1x1 square tube supports
http://www.supermotors.org/getfile/197048/fullsize/Gas%20Tank%20Cover%20020.jpg

plate steel for building box to cover/protect gas tank
http://www.supermotors.org/getfile/194897/fullsize/Gas%20Tank%20Cover%20004.jpg

my trainee
http://www.supermotors.org/getfile/194898/fullsize/Gas%20Tank%20Cover%20006.jpg

5 yrs old and helpin' Dad .. as stated above, he helped me weld the box togther and welded the hinges on too!
http://www.supermotors.org/getfile/194899/fullsize/Gas%20Tank%20Cover%20007.jpg

welded another strip of 1x1 angle iron to the bed and welded the hinges to it
http://www.supermotors.org/getfile/194900/fullsize/Gas%20Tank%20Cover%20009.jpg

had to have a handle :)
http://www.supermotors.org/getfile/194901/fullsize/Gas%20Tank%20Cover%20011.jpg

here it is
http://www.supermotors.org/getfile/194902/fullsize/Gas%20Tank%20Cover%20013.jpg

finished product
http://www.supermotors.org/getfile/194903/fullsize/Gas%20Tank%20Cover%20010.jpg

http://www.supermotors.org/getfile/197046/fullsize/Gas%20Tank%20Cover%20018.jpg

tucked in nice and tight .. have much better departure angle now
http://www.supermotors.org/getfile/197049/fullsize/Gas%20Tank%20Cover%20022.jpg

http://www.supermotors.org/getfile/197050/fullsize/Gas%20Tank%20Cover%20023.jpg

http://www.supermotors.org/getfile/197051/fullsize/Gas%20Tank%20Cover%20025.jpg

Ground down the plates welded on the push bar tubes to round and here is finished product

wheels look crooked thanks to backing up with a TTB :toothless

http://www.supermotors.org/getfile/197047/original/Gas%20Tank%20Cover%20019.jpg

I like that hitch idea. My your able to pull out the cross peice and flip it over. Which I did. It gave me about 3" more clearance and still allowed for some protection of the gas tank. One day I will raise that POS tank.

Dual batteries and 200AMP 3G for the winch

http://www.supermotors.org/getfile/188425/fullsize/Gas%20Tank%20Tow%20Hitch%20Bumper%20016.jpg

Voted for marauder. His bronco makes a good computer background. :thumbup

http://img.photobucket.com/albums/v251/444marlin/Junk/Untitled-Captured-01.jpg

Damager has been a good picture whore this month :goodfinge

Wow! Now that is really cool. I am honored :beer

got to go with Damager too.............very cool what you have done........love the fact that you even get the family involved........ :rockon

Thanks guys :beer .. my son keeps asking me if we are winning, I say "so far Bud, but it isn't over yet" :doh0715:

Here is a vid of a wet mud run

http://www.supermotors.org/getfile/85857//100_0015.AVI

.

Sorry for not posting sooner but i have been sick. :uke:

so here is a few for all to check out.

http://www.americanprerunner.com/100_0101.JPG
Here's Dr. Dirty working on the coilovers

http://www.americanprerunner.com/trans01.jpg
Our new TCI C6

http://www.americanprerunner.com/trans02.jpg

http://www.americanprerunner.com/100_0438_resize.JPG

http://www.americanprerunner.com/piaa02.jpg

http://www.americanprerunner.com/c06.jpg

http://www.americanprerunner.com/100_0427.JPG

http://www.americanprerunner.com/Bronco-w-ifs.jpg

a few more

http://www.americanprerunner.com/100_0436_resize.JPG

http://www.americanprerunner.com/100_0437_resize.JPG

http://www.americanprerunner.com/100_0435_resize.JPG

http://www.americanprerunner.com/broncoside01.jpg

http://www.americanprerunner.com/broken%20rear01.jpg

http://www.americanprerunner.com/broken%20rear03.jpg

http://www.americanprerunner.com/broken%20rear03.jpg[/QUOTE]


There you are. I knew you wouldnt disappoint :thumbup

My Bud when he was just beginning on his journey with dad :thumbup

http://www.supermotors.org/getfile/82768/fullsize/101_0132.JPG

and here he is passed out from a rough day on the trail :twotu:

http://www.supermotors.org/getfile/82779/fullsize/101_0149.JPG

More Uwharrie from almost a year ago.

Some of our rigs have changed a good bit since this picture :toothless

http://www.supermotors.org/getfile/158824/fullsize/P1010146.JPG

Ill throw one out there for Dave since I voted for him. Here he is really pushing it on the hard stuff :toothless

http://www.supermotors.org/getfile/158838/fullsize/P1010153.JPG

http://www.supermotors.org/getfile/158860/fullsize/P1010168.JPG

http://www.supermotors.org/getfile/158861/fullsize/P1010169.JPG

http://www.supermotors.org/getfile/158862/fullsize/P1010170.JPG

Now infamous picture:

http://www.supermotors.org/getfile/158863/fullsize/P1010171.JPG

More open diff burnouts. Poor tires, I have really abused the hell out of them.

http://www.supermotors.org/getfile/158864/fullsize/P1010172.JPG

http://www.supermotors.org/getfile/158865/fullsize/P1010173.JPG

http://www.supermotors.org/getfile/158876/fullsize/P1010182.JPG

http://www.supermotors.org/getfile/158877/fullsize/P1010183.JPG

http://www.supermotors.org/getfile/158880/fullsize/P1010186.JPG

http://www.supermotors.org/getfile/158882/fullsize/P1010188.JPG

Caranage time

http://www.supermotors.org/getfile/159457/fullsize/P1010193.JPG

http://www.supermotors.org/getfile/159458/fullsize/P1010194.JPG

http://www.supermotors.org/getfile/159459/fullsize/P1010195.JPG

http://www.supermotors.org/getfile/159460/fullsize/P1010196.JPG

http://www.supermotors.org/getfile/159461/fullsize/P1010197.JPG

http://www.supermotors.org/getfile/164528/fullsize/uwharrie10.JPG

It's been a fun race this month. I just havn't had much time at all to whore. Since I'm leaving for a business trip tonight I prolly wont get anymore up for atleast a week. By then I assume Damager will have a commanding leaving on me :(

On a good note. I convinced my Girlfreind that she should help me fix my bronco and modify it this winter. Prolly Rhino line is and a little tube work for the fenders..

phill, FOTM is more important then ur business trip. stay home and whore some more

Carnage? .. ok, lets follow some jeeps around

http://www.supermotors.org/getfile/82778/fullsize/101_0148.JPG

http://www.supermotors.org/getfile/82772/fullsize/101_0139.JPG

http://www.supermotors.org/getfile/82795/fullsize/101_0154.JPG

http://www.supermotors.org/getfile/82796/fullsize/101_0155.JPG

http://www.supermotors.org/getfile/46872/fullsize/100_0010_2.JPG

http://www.supermotors.org/getfile/46873/fullsize/100_0014.JPG

http://www.supermotors.org/getfile/46874/fullsize/100_0015.JPG

http://www.supermotors.org/getfile/46871/fullsize/100_0013.JPG


Blown power steering
http://www.supermotors.org/getfile/46869/fullsize/100_0007_2.JPG

http://www.supermotors.org/getfile/46870/fullsize/100_0008.JPG

http://www.supermotors.org/getfile/46875/fullsize/100_0017.JPG

http://www.supermotors.org/getfile/46876/fullsize/100_0019.JPG

http://www.supermotors.org/getfile/46877/fullsize/100_0020.JPG

http://www.supermotors.org/getfile/46891/fullsize/100_0001_3.JPG

http://www.supermotors.org/getfile/46896/fullsize/100_0039.JPG

Wow. That's the first prerunner I've seen here Finishlinewest. What did you replace the 8.8 with?

http://www.supermotors.org/getfile/46879/fullsize/100_0022_2.JPG

as it is now

http://www.supermotors.org/getfile/229281/fullsize/June%2030%202005%20001.jpg

http://www.supermotors.org/getfile/229282/fullsize/June%2030%202005%20002.jpg

Here .. have a northern pike too

http://www.supermotors.org/getfile/133028/fullsize/camping%20july%204th-Dave%20066.jpg

http://www.supermotors.org/getfile/133029/fullsize/camping%20july%204th-Dave%20068.jpg

After rebuilding the 8.8 twice I decided something a bit more in line with how the Bronco is driven off road was warranted.

So...I ordered a Currie 9" Prerunner Axle with 4.88 and an ARB air locker was just the ticket.

http://www.americanprerunner.com/100_1434.JPG

http://www.americanprerunner.com/100_1436.JPG

http://www.americanprerunner.com/100_1437.JPG

Then after blowing the motor I opted for more power, lots more so I ordered a Jasper NASCAR 351 stroker and asked for HP, TQ and attitude, the result is a 680HP small block.

http://www.americanprerunner.com/100_1438.JPG

Its going in this hole.
http://www.americanprerunner.com/100_1439.JPG

All this stuff is either going in or already in.

http://www.americanprerunner.com/100_1440.JPG

So as you can see it is busy days and sleepless nights at the shop.

Nice! How many spline did you go with the 9"? I'm sure you moved the air line from the exhaust. Also I hope the zip ties are temporary on the rear brake lines. The amount of goodies for that motor is dazzling. What will you have in it when done? 10K? more? :popc1:

nice axle



... could we get the next pictures a little bigger please? :goodfinge

Here is August 2004 calander shot .. Me and my Bud

http://www.supermotors.org/getfile/83338/fullsize/CIMG0035.JPG
.
http://www.supermotors.org/getfile/83338/original/CIMG0035.JPG

Febuary 2004 Calender shot

http://www.supermotors.org/getfile/84222/fullsize/driveway%20pic%201.JPG

little climb

http://www.supermotors.org/getfile/85845/fullsize/100_0037.JPG

http://www.supermotors.org/getfile/83332/fullsize/CIMG0032.JPG

sweet whorin damager. you got my vote. but still keep the pics comin

Thanks Bro .. here is another part of the fun of wheeling with jeep guys..when they are close to the camera, they look life size ..

http://www.supermotors.org/getfile/83333/fullsize/CIMG0033.JPG

but then up next to a Bronco .... look at him .. awww, what a cute widdle guy

http://www.supermotors.org/getfile/83334/fullsize/CIMG0034.JPG :rofl: :histerica

i had to vote for my man damager. gota love the bootyfab :toothless

yup.. got my ass handed to me!! lol..

Booty is the only way to go for a wheeler!!! THANKS!!!

gotta be able to save up for broken parts you can't make yourself :toothless

http://www.supermotors.org/getfile/83336/fullsize/CIMG0036.JPG

http://www.supermotors.org/getfile/82774/fullsize/101_0142.JPG

don't think I posted this mud run

http://www.supermotors.org/getfile/85857/thumbnail/100_0015.AVI

http://www.supermotors.org/getfile/85250/fullsize/100_0051.JPG

Damager... your a shameless whore! :rockon

YOU TALKIN' TO ME??

http://www.supermotors.org/getfile/85852/fullsize/100_0049.JPG

Damager got my vote.
Great job with the newish paint D.
Better get that thing back into the dirt soon

Thaks Brah .. here is more on the paint

http://www.supermotors.org/getfile/226899/fullsize/black%20paint%20001.jpg

http://www.supermotors.org/getfile/226900/fullsize/black%20paint%20002.jpg

http://www.supermotors.org/getfile/226901/fullsize/black%20paint%20004.jpg

http://www.supermotors.org/getfile/227491/fullsize/June%2024%202005%20034.jpg

http://www.supermotors.org/getfile/227493/fullsize/June%2024%202005%20029.jpg

http://www.supermotors.org/getfile/229281/fullsize/June%2030%202005%20001.jpg

its a close one. damager has been the biggest post whore in FOTM history, and it rocks :rockon but finishlinewest has an absolutely SICK prerunner. gonna hold out a little longer

I'm gonna hold out till the last minute, wanna see what other guys can come up with. Def. need to see more of that pre-runner, finishline.

here it is when I bought it

http://www.supermotors.org/getfile/46724/original/QVLIN045.jpg

http://www.supermotors.org/getfile/46725/original/QVLIN046.jpg

and home

http://www.supermotors.org/getfile/46726/original/QVLIN047.jpg

this is turning into a good run here

Some Phil Pimping Since He is out of town for the week...VOTE Bronco85

This is at Wishbone August 8th this year

Here's our 2 after that same Wishbone run...mine was running Like CRAP!

what it looked like coming home from the last wheeling run .... thank god for the winch

http://www.supermotors.org/getfile/225080/fullsize/July%2017%202005%20005.jpg

http://www.supermotors.org/getfile/227491/fullsize/June%2024%202005%20034.jpg

looks good Damager...one question. I must have missed it..what do you have around your fenders

flexy flares.. had to get rid of the Bushwackers

http://www.supermotors.org/getfile/71935/fullsize/100_0016_5.JPG

http://www.supermotors.org/getfile/71936/fullsize/100_0018_6.JPG

http://www.supermotors.org/getfile/71937/fullsize/100_0019_4.JPG

http://www.supermotors.org/getfile/94583/fullsize/100_0001_2.JPG

http://www.supermotors.org/getfile/94584/fullsize/100_0005_2.JPG

http://www.supermotors.org/getfile/94585/fullsize/100_0002_2.JPG

hacked them off when I put the Bushwackers on .. no need for clean lines

http://www.supermotors.org/getfile/94586/fullsize/100_0006_2.JPG

here is fixing that

http://www.supermotors.org/getfile/94587/fullsize/100_0007_2.JPG

http://www.supermotors.org/getfile/115601/fullsize/flares%20002.jpg

and here they are for sale

http://www.supermotors.org/getfile/129649/fullsize/flares%20025.jpg

Some Beech Mountian pics. I dont have very many because out of the 7 jeep guys taking pictures, none of them would give me any pics. So most of these are poserrific I was the only fullsize there. The rest were all wranglers with a cherokee or 2.

http://www.supermotors.org/getfile/177093/fullsize/P1030309.JPG

http://www.supermotors.org/getfile/177104/fullsize/P1030321.JPG

http://www.supermotors.org/getfile/177106/fullsize/P1030322.JPG

http://www.supermotors.org/getfile/177107/fullsize/P1030323.JPG

http://www.supermotors.org/getfile/177115/fullsize/P1030331.JPG

http://www.supermotors.org/getfile/177116/fullsize/P1030332.JPG

http://www.supermotors.org/getfile/177112/fullsize/P1030328.JPG

http://www.supermotors.org/getfile/177113/fullsize/P1030329.JPG

http://www.supermotors.org/getfile/177119/fullsize/P1030335.JPG

http://www.supermotors.org/getfile/177120/fullsize/P1030336.JPG

http://www.supermotors.org/getfile/177122/fullsize/P1030338.JPG

http://www.supermotors.org/getfile/177124/fullsize/P1030340.JPG

i had to put my vote in for marauder. Subtle but sylish mods. Love the bronco dude.

i had to put my vote in for marauder. Subtle but sylish mods. Love the bronco dude.

Thanks dude :beer

extra doors for winter

http://www.supermotors.org/getfile/85902/fullsize/100_0051.JPG

http://www.supermotors.org/getfile/85903/fullsize/100_0052.JPG

http://www.supermotors.org/getfile/85908/fullsize/100_0053.JPG

Is that roof sealer?

yeah roof cement :doh0715: ..... try black rust paint

they are only for winter so a quick sanding and brushed on .. no fuss no muss .. hahaha

here is way back when I painted the top

http://www.supermotors.org/getfile/46742/original/QVLIN081.jpg

http://www.supermotors.org/getfile/46743/original/QVLIN080.jpg

slipped that tarp under there and was good to go .. hahaha

http://www.supermotors.org/getfile/46744/original/QVLIN082.jpg

later that day

http://www.supermotors.org/getfile/46745/original/QVLIN083.jpg

http://www.supermotors.org/getfile/46746/original/QVLIN085.jpg

http://www.supermotors.org/getfile/88306/fullsize/100_0020.JPG

did i win yet?

http://www.supermotors.org/getfile/82771/fullsize/101_0135.JPG

http://www.supermotors.org/getfile/85855/fullsize/100_0019.JPG

How much longer left to vote?
We have to get to atleast 200!

http://www.supermotors.org/getfile/128760/fullsize/Chaline%20Valley%20june%2013.jpg

http://www.supermotors.org/getfile/82769/fullsize/101_0133.JPG

Here is my wheel well ghetto fabulous creation. Had to close the gap after getting rid of the Bushwacker flares and here is what I did :

http://www.supermotors.org/getfile/120787/fullsize/snorkel-wheelwells%20009.jpg

Took an old garbage can
http://www.supermotors.org/getfile/120786/fullsize/snorkel-wheelwells%20010.jpg

cut it up and VIOLA!
http://www.supermotors.org/getfile/120788/fullsize/snorkel-wheelwells%20011.jpg

here are my dudes workin' on their rig right along side Dad .. it makes a man proud I tell ya :twotu:
http://www.supermotors.org/getfile/120790/fullsize/snorkel-wheelwells%20015.jpg

http://www.supermotors.org/getfile/120791/fullsize/snorkel-wheelwells%20019.jpg

BTW .. it was my Birthday yeseterday , so vote for me dammit :toothless





..




Eddie Bauer Edition - stock 302
* Replaced engine with EFI 302 from '91 F-150
* New HD Starter
* New Starter Relay
* New HD 130amp Alternator
* New HD Battery
* New Ball Joints
* New U-Joints
* New Axle Seals Front and Rear
* New Warn Premium Hubs
* Fenders Trimmed and Bushwacker Cut Out Flares installed
* Chipped, Hammered and Ground down all rust under entire truck - axles, floor pans, frame, wheelwells, etc
* Undercoated Completely with POR-15 Rust preventitive Paint
* 35x12.50 Dunlop Mud Rovers
* Black 15x10 Rock Krawler Rims
* Sanded and painted the top with Krylon
* Brand New Gas Tank and Sending Unit
* New Master Cylinder and Brake Booster from F250
* 700 WATT Power Inverter Mounted in Glove Box
* RAM Tow Hooks in Front
* Grill Guard with Dual 100 Watt Lights
* New Heater Core
* 6" BDS Suspension Lift with Extended Radius Arms
* Braided Brake Lines Front/Rear
* Extended Differential Breather Lines
* Full 10 Point Roll Cage
* Homemade Half Doors
* New Fuel Pump
* New Feul Pump Relay
* Home made 3" Snorkel
* Home made Rock Sliders
* CB and 4' Firestik Anteanna
* Warn XP9500 Winch
* 200 AMP 3G Alternator
* Dual Batteries
* Inverted Class III Tow Point/Hitch
* Mini-Spooled 8.8
* Cut Rear Bed and Raised Gas Tank for clearance


Drivetrain: stock TTB front and 8.8 rear with Mini-Spool....for now...these mods will come when I start breaking stuff ...hehehe
.
Notes: Modifications to come -

* Sterling 10.25 Rear Axle (Got it)
* Dana 60 Front Axle
* Upgrade Calipers from F350
* 37x13.5 Boggers

Damager for all of the "himself" that he has put into his rig! Now if he could get himself out of it, liquid soap may help! Good work man!

did i win yet?
Too little too late bro. :doh0715:

tough choice guys, but damager is whoring it up..sometime this week we gotta play some BF2 bro.

yeah man .. I hear that ... I have IP of servers that we play on .. Teamspeak server as well for voice

new website under development http://www.gzrgaming.com/home/

we split the BF2 faction off from the FARCRY guys .. it was www.geezergamimg.com

front of lift installed.. 2yrs ago

http://www.supermotors.org/getfile/46841/original/QVLIN286.jpg

and the rear

http://www.supermotors.org/getfile/46842/original/QVLIN299.jpg

Just pushed Damager up to 45. Awsome work man definately looking good :beer :popc1:

Geez I leave for a week and I get blown out of the water!! Good Job Damager!

My Girlfreind told me yesterday that I need to fix my broken Bronco so I can take her wheelin again..:) To bad I have no money :(

Geez I leave for a week and I get blown out of the water!! Good Job Damager!

My Girlfreind told me yesterday that I need to fix my broken Bronco so I can take her wheelin again..:) To bad I have no money :(
Fix it quick! Gotta keep the lady satisfied. :thumbup

Just pushed Damager up to 45. Awsome work man definately looking good :beer :popc1:


Thanks Bro .. my little guys are all happy Daddy and 'Da Bonco' might be the best!! .... hahahaha :twotu:

WOW some nice broncos on here this month. Im have to go with Damager great bronco, nice whoring also :rockon . Bronco85, marauder, and finishline nice broncos too. Wish we had wheeling trails like that first post by 85 :cry . BTW Marauder where did you score that sweet FSB sticker on your rear right window?? i want one for the back of my rollbar. Nice broncos everyone :twotu:

P.S. Damager can't wait till your son grows up and we see his bronco on here :twotu: :rockon im 17 and i am barley learning to weld, hes 4 and hes already getting the jog done nice :thumbup

BTW Marauder where did you score that sweet FSB sticker on your rear right window?? i want one for the back of my rollbar.

I had it made up by Decalkits.com.

Here is a link to right where I did mine.

http://www.decalkits.com/customdecals.html

Just type in what you want, font, size, and any "extras" then just order them up. I actually have 2. I have a matching one on the left side I guess I just dont have any pictures of the left side of my truck after I put them on :toothless

Oh yeah, I also made one up for the dedication to my dad on the back:

http://www.supermotors.org/getfile/151218/fullsize/P1010026.JPG

my windshield sticker was done at decalkits too

C'mon Bronco85...Get to Pimpin' your ride :thumbup

Boulder Trail, AK (http://www.supermotors.org/vehicles/registry/detail.php?id=70&s=25850#content)

check out my main man .. :rockon

http://www.supermotors.org/getfile/95432/fullsize/sun27th0023.JPG

http://www.supermotors.org/getfile/95434/fullsize/sun27th0011.JPG

The dude on some rocks

http://www.supermotors.org/getfile/146871//Will%20Rocks%20012.avi

and makin' a 'mud run' like dad :twotu:

http://www.supermotors.org/getfile/95345//100_0027_2.AVI

of course I gotta have my bitty guy playing too :drinkbud

http://www.supermotors.org/getfile/95486/fullsize/100_0023.JPG

http://www.bronkzilla.com/images/misc/damager.gif
http://www.cafeshops.com/damagerclub

At this point he has 50 votes. That's like 174 Canadian.

http://www.bronkzilla.com/images/misc/damager.gif
http://www.cafeshops.com/damagerclub

At this point he has 50 votes. That's like 174 Canadian.


everybody buy one :rofl: :histerica


Scott .. now I will find you and kill you :goodfinge

Why ya gotta be dissin' da Cannuks?
:thehand

Canadians smell funny

http://www.supermotors.org/getfile/122284/fullsize/scan0002.jpg

http://www.supermotors.org/getfile/122285/fullsize/scan0003.jpg

http://www.supermotors.org/getfile/122286/fullsize/scan0004.jpg

http://www.supermotors.org/getfile/122287/fullsize/scan0005.jpg

http://www.supermotors.org/getfile/122289/fullsize/scan0007.jpg

http://www.supermotors.org/getfile/122291/fullsize/scan0008.jpg

http://www.supermotors.org/getfile/122292/fullsize/scan0009.jpg

http://www.supermotors.org/getfile/122293/fullsize/scan0010.jpg

http://www.supermotors.org/getfile/122294/fullsize/scan0011.jpg

http://www.supermotors.org/getfile/122295/fullsize/scan0012.jpg

http://www.supermotors.org/getfile/122296/fullsize/scan00013.jpg

http://www.supermotors.org/getfile/122297/fullsize/scan00014.jpg

Canadians smell funny


actually, they act funny :wacko

Phill's got a pair.......Pair of Broncos that is...LOL
VOTE Bronco85

I've heard they have good beer! :beer

check out my main man .. :rockon

http://www.supermotors.org/getfile/95432/fullsize/sun27th0023.JPG

http://www.supermotors.org/getfile/95434/fullsize/sun27th0011.JPG

The dude on some rocks

http://www.supermotors.org/getfile/146871//Will%20Rocks%20012.avi

and makin' a 'mud run' like dad :twotu:

http://www.supermotors.org/getfile/95345//100_0027_2.AVI

of course I gotta have my bitty guy playing too :drinkbud

http://www.supermotors.org/getfile/95486/fullsize/100_0023.JPG

:twotu:

http://www.supermotors.org/getfile/138193/fullsize/P1010791.JPG

http://www.supermotors.org/getfile/138194/fullsize/P1010792.JPG

http://www.supermotors.org/getfile/138195/fullsize/P1010793.JPG

http://www.supermotors.org/getfile/138196/fullsize/P1010794.JPG

http://www.supermotors.org/getfile/124347/fullsize/P1010539.JPG

http://www.supermotors.org/getfile/124359/fullsize/P1010553.JPG

http://www.supermotors.org/getfile/124363/fullsize/P1010558.JPG

http://www.supermotors.org/getfile/124360/fullsize/P1010554.JPG

http://www.supermotors.org/getfile/127736/fullsize/P1010626.JPG

http://www.supermotors.org/getfile/127955/fullsize/P1010635.JPG

http://www.supermotors.org/getfile/127956/fullsize/P1010636.JPG

http://www.supermotors.org/getfile/127959/fullsize/P1010639.JPG

http://www.supermotors.org/getfile/127960/fullsize/P1010641.JPG

http://www.supermotors.org/getfile/127961/fullsize/P1010642.JPG

http://www.supermotors.org/getfile/173664/fullsize/P1010279.JPG

Salt-tastic!

http://www.supermotors.org/getfile/173673/fullsize/P1010271.JPG

http://www.supermotors.org/getfile/173663/fullsize/P1010261.JPG

http://www.supermotors.org/getfile/205546/fullsize/DSCN1994.JPG

Look ma, no tires!

http://www.supermotors.org/getfile/205547/fullsize/DSCN1995.JPG

haha ... repost the same pics Bro?

pics after lift install

http://www.supermotors.org/getfile/46854/original/QVLIN314.jpg

http://www.supermotors.org/getfile/46855/original/QVLIN315.jpg

http://www.supermotors.org/getfile/46856/original/QVLIN316.jpg

http://www.supermotors.org/getfile/46858/original/QVLIN318.jpg

http://www.supermotors.org/getfile/46859/original/QVLIN319.jpg

http://www.supermotors.org/getfile/46860/original/QVLIN320.jpg

haha ... repost the same pics Bro?
You can only take so many driveway shots

With 54 VOTES, I have to congratulate DAMAGER for winning Oct. '05 FOTM.....

Congrats, D

Allcruisen :imp :usa