Pherox: ask those guys on that site if they have any exp fabbing dashes for the bronco
Pherox: im thinking about trying to get a diff dash w/satinless or brushed alumin paneling for the gauages and radio, etc


this is what he said to me today. anyone know anything about this kind of stuff?? the dash we currently have is hidious and i can see why he wants to change it. im using his words above because if i use my own words i probably wont convey it correctly. :doh0715:

just how crazy do you want to go?
http://www.fiberwerx.com/fullsize-dash_shwcase4.htm

custom78 built himself a nice aluminum dash

Might wanna send him a link to this, Im not sure if its up his alley. I did it for the smaller space the heater took up under the hood and the extra switch capacity. It took me more then a month to do, working after work a few hours at a time and I just wanted to get it running so I didnt run any of the wires in looms or anything, plus I rewired everything, which doesnt have to be done to make this swap. Also I need to go back and finish the metal between the dash and the windsheild, that will happen when I pull it to re do the wires and get a new windsheild (so I can weld it in.) If I had to do it again I would have seen about getting the dash to sit lower, the 70's steering shaft comes out straighter then the 80's so they interfere with eachother causing the dash to sit up pretty high.
http://www.supermotors.org/getfile/197441/fullsize/Picture%20094.jpg
http://www.supermotors.org/getfile/161703/fullsize/Picture%20003.jpg
http://www.supermotors.org/getfile/132295/fullsize/Picture%20007.jpg
http://www.supermotors.org/getfile/132290/fullsize/Picture%20001.jpg
http://www.supermotors.org/getfile/161713/fullsize/Picture%20156.jpg
http://www.supermotors.org/getfile/132298/fullsize/Picture%20010.jpg
http://www.supermotors.org/getfile/210466/fullsize/Picture%20136.jpg

NICE!!! yea i will link him to this thread and if he cant post anything due to time or connection restraints i will get back and let you know what he said :) thanks

You can always paint it up, or if it's torn up find one on here and paint it up. There are a bunch of places that sell custom faces, Marauder actually made his, i don't know if he ever installed them.

I know your talking about the whole dash, but this is what my gauges look like.

http://www.supermotors.org/getfile/173442/fullsize/Dash.jpg

Rob that's fricken awsome. Did you upgrade the guages too or are they just stock?

You can always paint it up, or if it's torn up find one on here and paint it up. There are a bunch of places that sell custom faces, Marauder actually made his, i don't know if he ever installed them.

I know your talking about the whole dash, but this is what my gauges look like.

http://www.supermotors.org/getfile/173442/fullsize/Dash.jpg

he really likes this...how did you do it and what paint did you use...please share

Its just an overlay, you can pick them up on ebay or from Nu-Image.

http://www.truckperformance.com/products/category_Gauges+~~+Dash/productcategory_Gauge+Faces+and+AC+Panels/searchtype_d/sortorder_ADA/sf1_FORD/sf2_1993/sf3_Bronco/

Sherri nailed it on the head. I had to pull the bezel and some of the dash, pull the needles off, pull the old overlays off, and put the new ones on.

Took me about 2 hours since it was the first time i took the dash apart on the Bronco. Could probably do it now in about 20 minutes.

It's on the stock cluster, i just pulled off the paper thin overlays and put the new ones on.

Doesnt sound like a fabrication...

Doesnt sound like a fabrication...

as i explained up top, i realize their looking for something for the whole dash.

Ya just giving you a hard time, I also noticed that she said he liked yours, meaining I guess he's flexable.