BadassBronco
09-07-2003, 09:55 PM
so what do you guys think, looks good? its a hair below pointing at the T case. i know im gonna have to get a CV shaft on the T case to get my driveline so its not gonna bind.
i forogt to measure the driveshaft angle, but at droop it is gonna be severe
that is with 3* caster at the knuckle, with 2* bushings that i had laying in a pile. my 7* bushings where to much on it and then made to much caster.
im gonna buy a set of 4* C bushings and call it good for this spot. that looks optimum to me.
note, all specs given here are at old ride hieght, which i intend to base my new suspenson to be at.
http://www.superford.org/getfile.php?id=85335&toggle=fullsize&filename=DSC01206.jpg
i forogt to measure the driveshaft angle, but at droop it is gonna be severe
that is with 3* caster at the knuckle, with 2* bushings that i had laying in a pile. my 7* bushings where to much on it and then made to much caster.
im gonna buy a set of 4* C bushings and call it good for this spot. that looks optimum to me.
note, all specs given here are at old ride hieght, which i intend to base my new suspenson to be at.
http://www.superford.org/getfile.php?id=85335&toggle=fullsize&filename=DSC01206.jpg