jopes
03-16-2003, 12:28 PM
in one weeks time I have effectively gutted the prerunner.
engine, tranny, tcase, sway bars, drive shafts, EFI, lights. it is basically almost ready to get into preping for the paint work inside of the engine compartment.
alot of this would not be possible with out the help of Bryan aka TheMoneyPit from PJB.
http://www.piratefleet.com/jopes/bronko/
all those pix sould keep ya all busy for a bit!
NOBS!
03-16-2003, 12:58 PM
you've been a busy girl! :finger:
offroad_joe
03-16-2003, 03:47 PM
Your moving along fast. You got yourself one hell of a deal.
dhath
03-16-2003, 04:01 PM
Can't wait to see the finished product!!! :cheers:
Canadian Bronco
03-16-2003, 05:30 PM
you've been a busy girl! :finger: :lollol: :cheers:
jopes
03-17-2003, 12:22 AM
you've been a busy girl! :finger:
If I wait for you to help it is never going to get done.
Crazed
03-17-2003, 02:16 AM
Looks like you are moving along, How many shocks is it gonna have when you are done?
jopes
03-17-2003, 02:18 AM
holy shocks batman
it was a desert racer. they needed them!
I will use no more than 2 per corner. but most likely only 1 shock per corner. Still trying to figure out where to mount my front shocks.
79broncn
03-17-2003, 10:58 AM
Thanks for sharin', Don. Exactly what's yer plan? Are you gonna be
swapping yer red/white's engine and drivetrain over to the pre-runner
or swapping the pre-runner's body to yer red/white bronco? There's
a whole lot of options here...along with the 14b ya plan on pickin' up.
Somebody put a lot-o-time into beefin'/cagin' the pre-runner. I'm sure
yer lookin' to get the best of both rigs. Good luck with it...hella fun.
jopes
03-17-2003, 12:46 PM
the prerunner is kinda tied on to the frame which will make moving parts of it pretty hard. So my drive train into the prerunner.
Sell of my 9" with detroit.
put a 14 bolt in.
NOBS!
03-17-2003, 11:13 PM
Sell of my 9" with detroit.
put a 14 bolt in.Welded solid??
jopes
03-18-2003, 01:52 AM
nah I am going to buy the detroit. they are only like 300 bux.
NOBS!
03-18-2003, 02:41 AM
oh yeah..drop in for those. :cool:
79broncn
03-18-2003, 02:53 PM
the prerunner is kinda tied on to the frame which will make moving parts of it pretty hard. So my drive train into the prerunner.
Thanks for the reply. Was wonderin' how you would swap bodies with all
the engine bay bracing/shock hoops and all which appeared to be tied
in at the firewall. Should be very nice, Don. Luck with it. :cheers: