I have an '86 FSB..with 6" lift running 35"s..I want to bigger on my lift but i have to swap my IFs for a solid axle..just curious what are my options on axles ..also what year models can i get these axles from

http://fullsizebronco.com/forum/images/top_search.gif


This has been well covered.
Someone please lock this post.:banghead :banghead :banghead :banghead

took me all of 6 seconds.
http://fullsizebronco.com/forum/showthread.php?s=&threadid=2620

I also ttt'd for you.

you will need to find a Dana 30 from a TJ as they are the only other straight axles that use coils. then you will have to have to axles and tubes lengthened to full width.

:goodfinge

for the best strength you should swap in a D60 35 spline HP front axle
such as the ones i have for sale. :D

dont mind the hazeing mudder78, that happens to all the new guys who havnt learned there way around the site yet. BA does have some really good axles for that swap. if you use the search like beerman linked you too, you will find tons of info from guys here who have done much reseach and from their actual experiances. check out badass's superford page, dustins, dblue351, nobs, keithL, and many others on this site. you can see step by step what they did, and what worked best for them. d44, d60, spring, coil, whatever.
hope this helps.

hahahaha ............. FRESH MEAT!
http://216.40.249.192/s/contrib/dvv/esmil2.gif