View Full Version : Inline Tube Stainless Brakeline Kit


ruger1022
09-09-2006, 10:28 AM
Been seeing their ads in the 4x4 mags all the time, knew my rubber brake hoses needed to be replaced. (79 Bronco)

Ordered a set from them, for about $170. Found a set on ebay that sold for $80 afterwards...:banghead :banghead :banghead

Went on the truck fine, had to grind out my OEM brackets so that their design would fit. Took me a while to figure that one out, but if you look at it for a while, it will come together (the kit included almost no instructions). The hard tubes were a little long, and my brakelines coming off the proportioning valve were almost impossible to get off the vavle and the frame, so I left those.

Overall, it's a good kit, glad to get the old cracking rubber off and have quality hoses on there.