Just got my 78 restored Bronco. Looking for others who know more than I do about these fine wheels.

I'm in Bozeman, but not sure about mechanical stuff. Need electrical done, though, and I'm your man.

Need any stereo equipment installed for you or your friends, and I can do it really cheap. I can also find some nice deals on equipment online. I'm bored and looking to do some more work on cars.

By cheap, I get paid $9.50 an hour at Vann's doing installation, and we charge about $55/hour. I'd charge around $10 an hour, especially if I'm putting some of my materials into the job, such as wires. But I love working on cars and would really like getting back into it. I like doing a lot of the bigger projects. I've done several stereos, underbody lights, foglights wired to turn on under various circumstances, and several other wiring issues.

Gauge faces from Scott Hrbacek:
http://www.supermotors.net/getfile/230282/fullsize/broncogauges.jpg
http://www.supermotors.net/getfile/426524/fullsize/boxvssony.jpg
Old LEDs under Bronco:
http://www.supermotors.net/getfile/240135/fullsize/broncoleds.jpg

I live in Billings. I have owned 3 FSB (2 right now '95 and '80). Let me know if you get out this way.

I just cracked the driver's side screw cover panel for the topper...really sucks. Had to drive to Ennis to do a dishwasher install, and on top of that, had the piping for the water come off because it was just some PVC with adhesive, nothing else holding it together. Had water spraying everywhere. So that really sucked... Got it fixed, though.

Looking for an Astro AWD so I have something to use for a work vehicle, since the Bronco isn't very practical. I get about 10MPG and work only pays me $.37 per mile...

If I can't find an Astro, I'd like to get something else with 4WD. A Ranger, S-10, something cheap. If you know of anything, let me know.

Steve and I are like 3-5 blocks apart. :D I'll try and get that speaker wiring done for him this weekend, as I have up through Tuesday off.