And finally mounted the brake lines down (never got around to it after the SAS.
http://www.supermotors.net/getfile/503383/fullsize/dscn1633.jpg

and extended the shock tower and moved it up 3 inches so I could get some more up travel, also rebuilt and shortened the bump stop.

http://www.supermotors.net/getfile/503381/fullsize/dscn1631.jpg

thats all for now...

I have the same problem. If it works as it is, it may be years untill it gets finished the "right" way.

I have the same problem. If it works as it is, it may be years untill it gets finished the "right" way.

Ya....I actually even started the cage ties from the floor to the frame...got the two front done...and my even try to finish up tomorrow...but every damn time I am out there I find more crap I wanna do to the bko.:doh0715:

http://www.supermotors.net/getfile/503383/fullsize/dscn1633.jpg

Is that a stock bracket to hold the line there or is it something you fabbed up?

Mine are running right through that hole in the frame with no support. I just cut the end off a shock bushing and shoved it around the brake line to keep it from wearing.

Is that a stock bracket to hold the line there or is it something you fabbed up?

Mine are running right through that hole in the frame with no support. I just cut the end off a shock bushing and shoved it around the brake line to keep it from wearing.

took a piece of flat stock, drilled a hole large enough for the brake line end, notched it to slide around the smaller line and the just bolted it to the frame...

Nice Tim, It's good to see you are getting interested in it again.