Bushwacker Cut-Out fender flares...I bought them for my 94 F150, they might fit a Bronco though.....I don't know. The front will for sure, don't know about the back.
They have 4 or 5 coats of Duplicolor Truck Bed Coating on them in a rolled texture finish. They are supposed to glue on, but that glue was crap and didn't hold for shit, so I drilled a small hole at the top edge of the flare every 5" and installed a pop-rivet there. They were only on the truck for a year I think, and didn't get any hits of bad scrapes. You will hav eto cut the corners of the fenders off to install them.


Make a donation to FSB in the ammount you feel its worth and I'll ship them out to you. I'd say around $80 or $100 is fair considering these are $400 new and its going to be at least $40 or $50 to ship these because of the size.



http://www.supermotors.net/getfile/211229/fullsize/000_0419.jpg

http://www.supermotors.net/getfile/211230/fullsize/000_0420.jpg

http://www.supermotors.net/getfile/211231/fullsize/000_0421.jpg

http://www.supermotors.net/getfile/211232/fullsize/000_0422.jpg



Thats one of the rivet holes in the top edge
http://www.supermotors.net/getfile/211233/fullsize/000_0423.jpg


http://www.supermotors.net/getfile/193687/fullsize/000_0203.jpg

http://www.supermotors.net/getfile/193685/fullsize/000_0201.jpg













This is how much has to be cut...
Back of rear fender, about 3" back
http://www.supermotors.net/getfile/253381/fullsize/100_0826.jpg

Front of rear fender, about 3"
http://www.supermotors.net/getfile/253382/fullsize/100_0827.jpg

Back of front fender, about 3" back
http://www.supermotors.net/getfile/253383/fullsize/100_0828.jpg

Front of front fender, about 1.25" forward
http://www.supermotors.net/getfile/253384/fullsize/100_0829.jpg

hmm, tempting to say the least, I could hide a lot of body rust with those, approximately how far do they stick out from the body?
Would they stick out past my sliders/rear bumper or tires?
http://bronconine.com/v-web/gallery/albums/album55/DSC01600.sized.jpg

They will stick out way further then the bumper and your tires. Look at that picture I got, thats a 14.50 on a 10" wheel with 4" of backspacing and it still won't even let a little tread show

do you still have those bushwackers ?

Do you think they will fit a 1991 F150? If so, consider them sold. Call me at 313-673-0190 to make arrangements

Thanks

John

Anyone know if they will fit the rear of the 92-96 broncos? I know the front will be ok. Just want to know about the back. I have a 1995

Do you think they will fit a 1991 F150? If so, consider them sold. Call me at 313-673-0190 to make arrangements

Thanks

John

I don't know if they will or not, but I'd guess they would even with the different front end. Does your fender look like mine in the picture?

yep. If you havent sold them yet and no one is in front of me, Ill take them. Send me a PM with the details.

Flares are SOLD

Thanks broke33 for the $100 donation




I packed the shit out of the box with newspaper and stuff because I know how UPS beats up big boxes. Hopefully they will show up in the same condition they left here in. Sorry about how dirty they are. I wanted to wash them but I didn't have time. I was already running late, I had to go, and if I didn't get them shipped right then I wouldn't have been able to do it for 2 or 3 weeks. Its just a tiny bit of tire mud splatter and garage dust. Nothing that shouldn't hose right off it