FullSizeBronco.com - 78 - 96 Ford Bronco offroad club, forums, tech, installs

corruption41 · 11-04-2009, 09:35 PM

Hey guys I have a stupid question. How do you take off the air tube going to the cat, do you just pull it or am I missing something here. haha thanks guys.

corruption41 · 11-05-2009, 11:41 AM

does nobody know?

kemicalburns · 11-05-2009, 11:58 AM

why are you removing it is the bigger question. that stuff is there for a reason. you pull that tube from your existing cat and it will be bad bad bad.

corruption41 · 11-05-2009, 12:08 PM

Im replacing the system and changing my front transmission seal. So im removing the exhaust because its all rusted really bad and i think it will be easier to remove the tranny.

kemicalburns · 11-05-2009, 01:50 PM

just disconnect it from the cat, but leave it hanging it wont affect you being able to remove the tranny.

kemicalburns · 11-05-2009, 01:50 PM

just disconnect it from the cat, but leave it hanging it wont affect you being able to remove the tranny.

kemicalburns · 11-05-2009, 01:51 PM

just disconnect it from the cat, but leave it hanging it wont affect you being able to remove the tranny.

Chuckler3 · 11-05-2009, 01:54 PM

combo breaker..

**SigEpBlue** · 11-05-2009, 04:15 PM

Also, cocks. I mean Sawzall.

11-04-2009, 09:35 PM	#1
corruption41 Registered User Join Date: Aug 2009 Posts: 12 iTrader: (0) corruption41s Garage	stupid question Hey guys I have a stupid question. How do you take off the air tube going to the cat, do you just pull it or am I missing something here. haha thanks guys.

11-05-2009, 11:58 AM	#3
kemicalburns Never Done Join Date: Mar 2003 Location: Central Orygun Posts: 4,558 iTrader: (4) kemicalburnss Garage	why are you removing it is the bigger question. that stuff is there for a reason. you pull that tube from your existing cat and it will be bad bad bad. __________________ 94 XLT 5.8/E4OD Trans-go stage II 6" Stage II ProComp,35x12.50BFG/MT 4.88 f/r open JBA headers,Custom Y pipe hi flow cat & Full 3" exhaust, Custom Sliders coming soon:Edelbrock truck intake,Front Aussie http://www.supermotors.net/vehicles/registry/17069

11-05-2009, 01:54 PM	#8
Chuckler3 Registered User Join Date: Oct 2009 Location: Rockford, IL Posts: 112 iTrader: (0) Bronco Info: 1995 XLT 351w, 32x11.5x15 BFG a/t's Chuckler3s Garage	combo breaker.. __________________ 95' XLT 351w... just got it... my tetanus shot that is...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

		FSB Forums > Bronco Discussions > Noobie Bronco Tech Questions. Flame free zone!
stupid question

Remove Advertisements Sponsored Links
FSB Forums Advertisement

11-05-2009, 11:41 AM	#2
corruption41 Registered User Join Date: Aug 2009 Posts: 12 iTrader: (0) corruption41s Garage	does nobody know?

11-05-2009, 12:08 PM	#4
corruption41 Registered User Join Date: Aug 2009 Posts: 12 iTrader: (0) corruption41s Garage	Im replacing the system and changing my front transmission seal. So im removing the exhaust because its all rusted really bad and i think it will be easier to remove the tranny.

11-05-2009, 01:50 PM	#5
kemicalburns Never Done Join Date: Mar 2003 Location: Central Orygun Posts: 4,558 iTrader: (4) kemicalburnss Garage	just disconnect it from the cat, but leave it hanging it wont affect you being able to remove the tranny.

11-05-2009, 01:51 PM	#7
kemicalburns Never Done Join Date: Mar 2003 Location: Central Orygun Posts: 4,558 iTrader: (4) kemicalburnss Garage	just disconnect it from the cat, but leave it hanging it wont affect you being able to remove the tranny.