FullSizeBronco.com - 78 - 96 Ford Bronco offroad club, forums, tech, installs

hillbilly77 · 11-02-2009, 07:20 AM

Well I am afraid my trans. is gonna need rebuilt and am curious what the going rate is for a complete rebuild and install(don't have a shop of my own to do it in.). The trans is the AOD out of an 1990 EB edition. Any info will be appreciated.

CRASHNDENT · 11-03-2009, 03:10 AM

Is newport WA north of spokane?
finally settled in here in Poulsbo. if it wasn't so far, i'd offer my help.

***BikerPepe`*** · 11-03-2009, 03:14 AM

about 45 min. north.

sorry 'bout the rebuild need. don't know any local costs or good sources right off hand, but I'd suggest making more than a few phone calls before jumping into a setup with any one of them. I got a reman from motorworks years back and it was screamin' but it was also a shady, backdoor deal with the owners son... so, what would I know about a legit deal? nothing.

hillbilly77 · 11-03-2009, 07:15 AM

Quote:

Originally Posted by CRASHNDENT

Is newport WA north of spokane?
finally settled in here in Poulsbo. if it wasn't so far, i'd offer my help.

Thanks for the offer for help, maybe I will have to look up all the parts I will need and send you a pm.

hillbilly77 · 11-03-2009, 07:19 AM

Quote:

Originally Posted by BikerPepe`

about 45 min. north.

sorry 'bout the rebuild need. don't know any local costs or good sources right off hand, but I'd suggest making more than a few phone calls before jumping into a setup with any one of them. I got a reman from motorworks years back and it was screamin' but it was also a shady, backdoor deal with the owners son... so, what would I know about a legit deal? nothing.

Wish I could find one that fell of the back of the truck.Wink Wink. But thanks for the reply. I have been calling around already and dang I think I may have to start selling blood.

***BikerPepe`*** · 11-03-2009, 02:20 PM

check "bills ford only" in Hillyard too. they may have a used unit.

hillbilly77 · 11-04-2009, 08:44 PM

Thanks I will definately check there.

87fomoco · 11-05-2009, 09:06 PM

I was quoted $650 for an AOD rebuild from a locall Trans guy. I have had him do another trans and he did an excelent job. If you are looking to go this route I highly recomend this shop.

Mel at TRANS TECH
1534 Industrial Way SW
Albany, OR 97322-3343
(541) 926-4122

87fomoco · 11-05-2009, 09:07 PM

Oh damn i now see you are in Newport WA not Newport OR.

hillbilly77 · 11-06-2009, 12:28 AM

Quote:

Originally Posted by 87fomoco

I was quoted $650 for an AOD rebuild from a locall Trans guy. I have had him do another trans and he did an excelent job. If you are looking to go this route I highly recomend this shop.

Mel at TRANS TECH
1534 Industrial Way SW
Albany, OR 97322-3343
(541) 926-4122

Damn that is an awesome price. Heck it would be worth shipping it down there at that price. Thanks for the info.

**liltimmy08** · 11-06-2009, 02:55 AM

Call Louie's trans here in Spokane. He rebuilt my E4OD at the cost of $2,600. I'm sure it would be cheaper for an AOD though.

**Seattle FSB** · 11-06-2009, 10:28 PM

Quote:

Originally Posted by 87fomoco

I was quoted $650 for an AOD rebuild from a locall Trans guy.

$650.00?????? An AOD is not a E4OD. $2500.00 average.

87fomoco · 11-07-2009, 04:36 AM

Quote:

Originally Posted by Seattle FSB

$650.00?????? An AOD is not a E4OD. $2500.00 average.

Read above he says he has an AOD.

**Seattle FSB** · 11-07-2009, 10:01 AM

Quote:

Originally Posted by hillbilly77

The trans is the AOD out of an 1990 EB edition.

Quote:

Originally Posted by 87fomoco

Read above he says he has an AOD.

1990 was the first year of the computer controlled E4OD in the 5.8L Full Size Bronco. My mistake as I did not see that he had a 5.0L.

**Seattle FSB** · 11-07-2009, 10:04 AM

Repost.

mettler · 11-09-2009, 12:52 PM

I know Les! He does alot of those shady deals. Well I dont know about alot... I used to work for him. Big guy. Nice tho. Motor works has alot of very knowlegable people. Les aint as dumb ass he looks niether. He's a genious when it comes to RC cars too.

11-02-2009, 07:20 AM	#1
hillbilly77 Registered User Join Date: Oct 2009 Location: Newport, Washington Posts: 8 iTrader: (0) Bronco Info: 1990 E.B. Eddition W/5.0 hillbilly77s Garage	A little help from locals Well I am afraid my trans. is gonna need rebuilt and am curious what the going rate is for a complete rebuild and install(don't have a shop of my own to do it in.). The trans is the AOD out of an 1990 EB edition. Any info will be appreciated.

11-03-2009, 03:10 AM	#2
CRASHNDENT Registered User Join Date: Mar 2003 Location: Poulsbo WA Posts: 158 iTrader: (0) Bronco Info: 78 6" susp 3" body on 42's CRASHNDENTs Garage	Is newport WA north of spokane? finally settled in here in Poulsbo. if it wasn't so far, i'd offer my help. __________________ The noblest fate that a man can endure is to place his own mortal body between his loved home and the war's desolation

11-03-2009, 03:14 AM	#3
*BikerPepe`* N0T W0RTHY Join Date: Feb 2003 Location: N.W. Spokane, WA. Posts: 13,665 iTrader: (0) Bronco Info: Project Pepe' '78 FSB: "Stinky LePew" BikerPepe`s Garage	about 45 min. north. sorry 'bout the rebuild need. don't know any local costs or good sources right off hand, but I'd suggest making more than a few phone calls before jumping into a setup with any one of them. I got a reman from motorworks years back and it was screamin' but it was also a shady, backdoor deal with the owners son... so, what would I know about a legit deal? nothing. __________________ "Oh, yeah, they're gonna talk to you, and talk to you, and talk to you about individual freedom. But they see a free individual, it's gonna scare'em." EasyRider

11-06-2009, 02:55 AM	#11
liltimmy08 Loves his auto hubs Join Date: Feb 2008 Location: Spokane Posts: 2,629 iTrader: (1) Bronco Info: 1996 XL 302, Rebuilt E40D, Transgo shift kit, 32" BFG's liltimmy08s Garage	Call Louie's trans here in Spokane. He rebuilt my E4OD at the cost of $2,600. I'm sure it would be cheaper for an AOD though. __________________ "If money grew on trees, The branches on mine wouldn't have no leaves"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

		FSB Forums > Wheeling > Pacific Northwest Chapter
A little help from locals

Remove Advertisements Sponsored Links
FSB Forums Advertisement

11-03-2009, 02:20 PM	#6
*BikerPepe`* N0T W0RTHY Join Date: Feb 2003 Location: N.W. Spokane, WA. Posts: 13,665 iTrader: (0) Bronco Info: Project Pepe' '78 FSB: "Stinky LePew" BikerPepe`s Garage	check "bills ford only" in Hillyard too. they may have a used unit.

11-04-2009, 08:44 PM	#7
hillbilly77 Registered User Join Date: Oct 2009 Location: Newport, Washington Posts: 8 iTrader: (0) Bronco Info: 1990 E.B. Eddition W/5.0 hillbilly77s Garage	Thanks I will definately check there.

11-05-2009, 09:06 PM	#8
87fomoco Registered User Join Date: Jul 2007 Location: Albany Oregon Posts: 307 iTrader: (0) Bronco Info: 1987 F150 5.0 SAS in progress 87fomocos Garage	I was quoted $650 for an AOD rebuild from a locall Trans guy. I have had him do another trans and he did an excelent job. If you are looking to go this route I highly recomend this shop. Mel at TRANS TECH 1534 Industrial Way SW Albany, OR 97322-3343 (541) 926-4122

11-05-2009, 09:07 PM	#9
87fomoco Registered User Join Date: Jul 2007 Location: Albany Oregon Posts: 307 iTrader: (0) Bronco Info: 1987 F150 5.0 SAS in progress 87fomocos Garage	Oh damn i now see you are in Newport WA not Newport OR.

11-07-2009, 10:04 AM	#15
Seattle FSB Fullsize Member Join Date: May 2007 Location: Seattle, WA Posts: 258 iTrader: (0) Bronco Info: 1990 EB FSB, 6.7L, MAF, E4OD, 4" Rancho, 4.56, 33" on 15x10 Alcoa's Seattle FSBs Garage	Repost.

11-09-2009, 12:52 PM	#16
mettler Registered User Join Date: Oct 2009 Location: Kenmore, WA Posts: 11 iTrader: (0) Bronco Info: 1989 Eddie Bauer mettlers Garage	I know Les! He does alot of those shady deals. Well I dont know about alot... I used to work for him. Big guy. Nice tho. Motor works has alot of very knowlegable people. Les aint as dumb ass he looks niether. He's a genious when it comes to RC cars too.