FullSizeBronco.com - 78 - 96 Ford Bronco offroad club, forums, tech, installs

miesk5 · 11-10-2009, 12:40 PM

ok... I've been having Comcast Cable line issues for weeks and am away so I found this; heater Box Replacement (w/dealer installed AC) in an 83
Source: by Michael C (collinsperformance, The Money Monster) at SuperMotors.net

an 84 engine compt. partial on drivers side by Michael at angelfire site 351W
http://www.angelfire.com/ok5/84bronc...s/DSC00163.JPG

Look in my site under PERSONAL PAGES by our fellow owners
check the 1984 Links.
I believe 80-96 should be almost same layout for the HVAC

then look in Climate Control Section... am thinking of the AC section in various sub topics...
Hopefully, someone in FSB can offer some pics for you soon.

etvalentin · 11-10-2009, 02:38 PM

Quote:

Originally Posted by miesk5

ok... I've been having Comcast Cable line issues for weeks and am away so I found this; heater Box Replacement (w/dealer installed AC) in an 83
Source: by Michael C (collinsperformance, The Money Monster) at SuperMotors.net

an 84 engine compt. partial on drivers side by Michael at angelfire site 351W
http://www.angelfire.com/ok5/84bronc...s/DSC00163.JPG

Look in my site under PERSONAL PAGES by our fellow owners
check the 1984 Links.
I believe 80-96 should be almost same layout for the HVAC

then look in Climate Control Section... am thinking of the AC section in various sub topics...
Hopefully, someone in FSB can offer some pics for you soon.

Wow man, extreamly helpful...thanks so much....

miesk5 · 11-10-2009, 03:17 PM

let's see if this AutoZone Repair Manual pic for your 84 351w works

miesk5 · 11-10-2009, 03:19 PM

ok, it shows cables for da "Function" and Temp Control
so... look there; just register for free
They used to have Chilton stuff; this looks like a combo of Chilton & Haynes (merged recently) along w/some crazy stuff.

miesk5 · 11-10-2009, 03:23 PM

ok; here is what Steve had and I showed you previously;

Fig. 7: Rear view of the A/C-heater control assembly, 1983-86

and my last post fig was for the Fig. 5: Rear view of the heater control assembly, 1983-86 with Standard and High Output Heater, without A/C

miesk5 · 11-10-2009, 03:24 PM

Fig. 17: Heater case assembly showing core and blower, 1980-86

Blend Doors often Warp &/or hinge bend/break etc.

Fig. 3: Evaporator disassembled, 1980-86

miesk5 · 11-10-2009, 03:30 PM

Fig. 19: Removing the Blower motor and wheel, 1980-86 with A/C

etvalentin · 11-10-2009, 07:47 PM

Quote:

Originally Posted by miesk5

Fig. 19: Removing the Blower motor and wheel, 1980-86 with A/C

Amazing miesk5...i realize now i really don't know how to use the internet...i searched for days for this stuff...really appreciate it....

miesk5 · 11-11-2009, 12:23 PM

Al Gore taught me 'bout da net back in 86..yeah, right! lol
Actually, I worked w/Univ of Kansas folks for awhile in those days when w/da Navy.
We were using paper and mucro-fische tech manuals to repair damages; by the time we got to the right pages..well, we were sunk in some scenarios; so, here comes da net!
From there I started collecting Bronco info and home repair stuff; in fact I jsut dnld'ed reair parts list for my 32 yo water pump.

GL pal!

11-10-2009, 12:40 PM	#21
miesk5 Registered User Join Date: Oct 2003 Location: USE FORD PARTS, let da ZONE handle ice scrapers Posts: 2,902 iTrader: (1) Bronco Info: 96 XL 5.0 E4OD, Man Xfer/Hubs miesk5s Garage	ok... I've been having Comcast Cable line issues for weeks and am away so I found this; heater Box Replacement (w/dealer installed AC) in an 83 Source: by Michael C (collinsperformance, The Money Monster) at SuperMotors.net an 84 engine compt. partial on drivers side by Michael at angelfire site 351W http://www.angelfire.com/ok5/84bronc...s/DSC00163.JPG Look in my site under PERSONAL PAGES by our fellow owners check the 1984 Links. I believe 80-96 should be almost same layout for the HVAC then look in Climate Control Section... am thinking of the AC section in various sub topics... Hopefully, someone in FSB can offer some pics for you soon. __________________ See our Big Bronco Technical, Parts Sources & Technical Service Bulletins Links site 96 XL 5.0 E4OD, Man Xfer/Hubs Our SF Site THANKS to ALL WHO SERVE!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

		FSB Forums > Bronco Discussions > Noobie Bronco Tech Questions. Flame free zone!
Will a heat blower motor just die or slowly go

Remove Advertisements Sponsored Links
FSB Forums Advertisement

11-10-2009, 03:17 PM	#23
miesk5 Registered User Join Date: Oct 2003 Location: USE FORD PARTS, let da ZONE handle ice scrapers Posts: 2,902 iTrader: (1) Bronco Info: 96 XL 5.0 E4OD, Man Xfer/Hubs miesk5s Garage	let's see if this AutoZone Repair Manual pic for your 84 351w works

11-10-2009, 03:19 PM	#24
miesk5 Registered User Join Date: Oct 2003 Location: USE FORD PARTS, let da ZONE handle ice scrapers Posts: 2,902 iTrader: (1) Bronco Info: 96 XL 5.0 E4OD, Man Xfer/Hubs miesk5s Garage	ok, it shows cables for da "Function" and Temp Control so... look there; just register for free They used to have Chilton stuff; this looks like a combo of Chilton & Haynes (merged recently) along w/some crazy stuff.

11-10-2009, 03:23 PM	#25
miesk5 Registered User Join Date: Oct 2003 Location: USE FORD PARTS, let da ZONE handle ice scrapers Posts: 2,902 iTrader: (1) Bronco Info: 96 XL 5.0 E4OD, Man Xfer/Hubs miesk5s Garage	ok; here is what Steve had and I showed you previously; Fig. 7: Rear view of the A/C-heater control assembly, 1983-86 and my last post fig was for the Fig. 5: Rear view of the heater control assembly, 1983-86 with Standard and High Output Heater, without A/C

11-10-2009, 03:24 PM	#26
miesk5 Registered User Join Date: Oct 2003 Location: USE FORD PARTS, let da ZONE handle ice scrapers Posts: 2,902 iTrader: (1) Bronco Info: 96 XL 5.0 E4OD, Man Xfer/Hubs miesk5s Garage	Fig. 17: Heater case assembly showing core and blower, 1980-86 Blend Doors often Warp &/or hinge bend/break etc. Fig. 3: Evaporator disassembled, 1980-86

11-10-2009, 03:30 PM	#27
miesk5 Registered User Join Date: Oct 2003 Location: USE FORD PARTS, let da ZONE handle ice scrapers Posts: 2,902 iTrader: (1) Bronco Info: 96 XL 5.0 E4OD, Man Xfer/Hubs miesk5s Garage	Fig. 19: Removing the Blower motor and wheel, 1980-86 with A/C

11-11-2009, 12:23 PM	#29
miesk5 Registered User Join Date: Oct 2003 Location: USE FORD PARTS, let da ZONE handle ice scrapers Posts: 2,902 iTrader: (1) Bronco Info: 96 XL 5.0 E4OD, Man Xfer/Hubs miesk5s Garage	Al Gore taught me 'bout da net back in 86..yeah, right! lol Actually, I worked w/Univ of Kansas folks for awhile in those days when w/da Navy. We were using paper and mucro-fische tech manuals to repair damages; by the time we got to the right pages..well, we were sunk in some scenarios; so, here comes da net! From there I started collecting Bronco info and home repair stuff; in fact I jsut dnld'ed reair parts list for my 32 yo water pump. GL pal!