Bad CDR valve - broke the hose going into intake valley - FSB Forums
Register Home Forums Active Topics Photo Gallery All Albums Mark Forums Read Auto EscrowInsurance FSB Store is the premier Ford Bronco Forum on the internet. Registered Users do not see the above ads.
Thread Tools Display Modes
Old 08-01-2010, 01:31 AM   #1
Registered User
ToughBronco's Avatar
Join Date: Oct 2007
Location: Milwaukee, WI
Posts: 2,148
iTrader: (1)
Bronco Info: Sold
Bad CDR valve - broke the hose going into intake valley

So I determined my CDR valve on my 7.3 IDI is the reason why it's smoking randomly. It is very gunked up and sticking. CDR valve is basically a PCV valve for a diesel. It does pretty much the same thing, except it operates somewhat differently. Anywho, the hose that goes into the intake valley end broke off and I had to cut out what was left, including the grommet. Is there a replacement for this plastic hose and grommet, and if so does anyone know the part number off hand? I have the part number for the CDR valve itself.

My other option would be just to run a road draft tube and delete the CDR since it's not really necessary, but I'd rather not.
1997 Ford F250 Heavy Duty XLT 4x4
7.3L PSD CCSB, E4OD, D50 TTB, 10.25 FF LS, 3.55's
2001 Ford E350 Super Duty Work Van
5.4L V8
ToughBronco is offline   Reply With Quote
Sponsored Links

  FSB Forums > Other Forums > Anything Else

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 02:47 AM.