FullSizeBronco.com - 78 - 96 Ford Bronco offroad club, forums, tech, installs

ZOSO · 06-25-2004, 02:22 PM

How bout a trip up to holy cross near the end of july? I've been wanting to hit that trail but can never seen to make it. It will give us all a chance to meet and then break some sh!t on the rigs. What do ya think.

mkraffert · 06-25-2004, 03:11 PM

I'm up for it. Set a date!

dkaska · 06-25-2004, 03:13 PM

Whats it like? Locker requirement?
I think i'd be up for it. I 6" open/open

TTBlows · 06-25-2004, 03:48 PM

few pics here:

http://www.superford.org/registry/ve...=13454#content

I don't have much desire to go back anytime soon, too busy IMO, but Danglin' Dave might be interested

BoulderBronco · 06-25-2004, 05:18 PM

I would be in. I have heard it can be quite busy but I have never done it. Set the date.

mkraffert · 06-25-2004, 08:31 PM

After looking at the pictures, I'm not sure I have a setup that can handle that yet. I'm still basically stock.

83rustbucket · 06-25-2004, 08:55 PM

It is a good trail but there are to many people. I am going to Mt. Blanca in late August, baring any more tranny problems.

**mixedup4x4** · 06-25-2004, 11:34 PM

i'd be in but i'm stock and don't think i would fare too well out there

FordX4Redneck · 06-26-2004, 01:06 AM

undefinedif i get my bronc on the road by then and the wife can get off work to watch the kids i will be there in a heart beat. will be the crissining of my rig since i bought her last december. never ran that trail befor but hell im game. it looks like a fun one.

**Broncobob** · 06-30-2004, 12:42 AM

Id be in but like a few above im still stock. Take lots of pictures though.

ZOSO · 07-01-2004, 04:44 PM

Is there a moab trip in october again? If there is we could all meet up go out there.

Monte · 07-01-2004, 08:52 PM

That trail looks bad ass. How long is the trail from start to finish and how far is it from SLC Utah? I would be down if a utahn is invited?

sceep · 07-02-2004, 11:10 AM

Quote:

Originally Posted by Monte

That trail looks bad ass. How long is the trail from start to finish and how far is it from SLC Utah? I would be down if a utahn is invited?

its about 9 miles round trip, up and back trail

location and info here http://www.4x4now.com/trcohc4.htm

xtremebronco.com · 07-17-2004, 01:07 PM

Hi All...
Im ken from grand junction co.
Yeah that trail look way cool....
Would love to go.
If i ever get my transsmission to work right that is.

06-25-2004, 02:22 PM	#1
ZOSO Registered User Join Date: Feb 2003 Location: In front of the computer. DUH! broomfield co Posts: 865 iTrader: (0) Bronco Info: 79 Donkey on 37's ZOSOs Garage	Colorado wheelin How bout a trip up to holy cross near the end of july? I've been wanting to hit that trail but can never seen to make it. It will give us all a chance to meet and then break some sh!t on the rigs. What do ya think. __________________ 04' cobra. 11.50 @ 122 colorados Fastest EATON only cobra 79' big rusty brown turd for a bronco.

06-25-2004, 03:11 PM	#2
mkraffert Registered User Join Date: Jun 2004 Location: Denver Posts: 33 iTrader: (0) Bronco Info: 1996 Eddie Bauer, 302, AEOD, 32 All Terrains, WARN Premium hubs so the snow won't eat my truck again when the auto hubs refuse to lock! mkrafferts Garage	I'm up for it. Set a date! __________________ 96 Eddie Bauer, 302, AEOD, 32" All Terrains, WARN Hubs so I don't get stuck again!

06-25-2004, 03:13 PM	#3
dkaska Registered User Join Date: Apr 2003 Location: Denver, CO Posts: 205 iTrader: (0) dkaskas Garage	Whats it like? Locker requirement? I think i'd be up for it. I 6" open/open __________________ 96F150 Small Box - 302 Man. 5 sp - FlwMst 6" Cepek II

06-25-2004, 03:48 PM	#4
TTBlows TTB Hater of course Join Date: Mar 2003 Posts: 3,150 iTrader: (0) TTBlowss Garage	few pics here: http://www.superford.org/registry/ve...=13454#content I don't have much desire to go back anytime soon, too busy IMO, but Danglin' Dave might be interested __________________ Totally Twisted and Broke makes me a saaaad Panda "You can almost see the dismay on Phil, Paul & Bob's faces when Trautwig is talking....and the pause in their voices after he stops....after which they pick-up the pieces of his non-sensical commentary and continue with their telling of the story that is the Tour de France! "

06-25-2004, 05:18 PM	#5
BoulderBronco FSB Vendor Join Date: Feb 2003 Location: Boulder, CO Posts: 2,604 iTrader: (4) Bronco Info: 93 5.8L tons of stuff BoulderBroncos Garage	I would be in. I have heard it can be quite busy but I have never done it. Set the date. __________________ Chris, 93 5.8L, 6" Superlift, Superrunner Steering kit, Warn hubs, BroncoAir front winch bumper, Warn M12000 winch, BroncoAir OBA System, AGR P/S Pump, K&N custom intakes, 4.88's, Front ARB, PIAA 90 Series fog/driving lights. Owner of Broncoair.com

		FSB Forums > Wheeling > Mountain States Chapter
Colorado wheelin

Remove Advertisements Sponsored Links
FSB Forums Advertisement

06-25-2004, 08:31 PM	#6
mkraffert Registered User Join Date: Jun 2004 Location: Denver Posts: 33 iTrader: (0) Bronco Info: 1996 Eddie Bauer, 302, AEOD, 32 All Terrains, WARN Premium hubs so the snow won't eat my truck again when the auto hubs refuse to lock! mkrafferts Garage	After looking at the pictures, I'm not sure I have a setup that can handle that yet. I'm still basically stock.

06-25-2004, 08:55 PM	#7
83rustbucket Finally got SAS'd Join Date: Dec 2003 Location: Silverthorne, Colorado Posts: 1,141 iTrader: (2) Bronco Info: 1991 SAS'd bronco HP44 front, duff arms, 4:56's, and detriot 9" rear, 4;56's ARB 83rustbuckets Garage	It is a good trail but there are to many people. I am going to Mt. Blanca in late August, baring any more tranny problems. __________________ My Superford Page

06-25-2004, 11:34 PM	#8
mixedup4x4 I have a Join Date: Dec 2003 Location: PA Posts: 398 iTrader: (0) Bronco Info: 04 F150 FX4--5.4L Triton mixedup4x4s Garage	i'd be in but i'm stock and don't think i would fare too well out there __________________ Make Free Cash More Free Cash

06-26-2004, 01:06 AM	#9
FordX4Redneck Registered User Join Date: Dec 2003 Location: Golden, CO Posts: 268 iTrader: (0) Bronco Info: 78 Bronco, 4" superlift, 1"body, 35x15x15 tsl/sx, 400ci, np435, 205, minispoold 9", warn8274 winch FordX4Rednecks Garage	undefinedif i get my bronc on the road by then and the wife can get off work to watch the kids i will be there in a heart beat. will be the crissining of my rig since i bought her last december. never ran that trail befor but hell im game. it looks like a fun one. __________________ Paul Goodman III '78 FORD BRONCO 4" superlift lift,1" body 35x15.5x15 super swamper TSL/SX mini-spooled 9" rear, d 44 front, 400 engine w/ 600cfm edelbrock My SUPERFORD Page

06-30-2004, 12:42 AM	#10
Broncobob In The Matrix Join Date: Feb 2003 Posts: 2,057 iTrader: (0) Bronco Info: 1994 Bronco Broncobobs Garage	Id be in but like a few above im still stock. Take lots of pictures though. __________________

07-01-2004, 04:44 PM	#11
ZOSO Registered User Join Date: Feb 2003 Location: In front of the computer. DUH! broomfield co Posts: 865 iTrader: (0) Bronco Info: 79 Donkey on 37's ZOSOs Garage	Is there a moab trip in october again? If there is we could all meet up go out there.

07-01-2004, 08:52 PM	#12
Monte Registered User Join Date: Feb 2004 Location: BOUNTIFUL, UTAH Posts: 142 iTrader: (0) Bronco Info: 1981 bronco, 8in lift, front and rear lockers, 456 gears, 9in rear with moser axles, 205 tranfer case, warn hubs, super runner steering, rancho 9000, custom rear bumper that's an air tank, warn 9000 lb winch, full roll cage, 35-1250-15 bfg ko's. bead Montes Garage	That trail looks bad ass. How long is the trail from start to finish and how far is it from SLC Utah? I would be down if a utahn is invited? __________________ Some day when I get all growed up I'll have a Bronco.

07-17-2004, 01:07 PM	#14
xtremebronco.com Registered User Join Date: Jul 2004 Location: Grand junction Colorado Posts: 270 iTrader: (1) Bronco Info: 1987 xlt and 1989 EB xtremebronco.coms Garage	Hi All... Im ken from grand junction co. Yeah that trail look way cool.... Would love to go. If i ever get my transsmission to work right that is.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode