Fuel gauge won't work

KYboy · 12-01-2012, 04:15 AM

I have a 1991 Bronco and the fuel gauge don't work any advice would help

**c-dub** · 12-01-2012, 05:53 AM

Quote:

Originally Posted by KYboy

I have a 1991 Bronco and the fuel gauge don't work any advice would help

start testing

**wdford** · 12-01-2012, 08:06 AM

ground the sender wire to see if it goes to full. If it does then your sender is the likely culprit.

**BRONCONUT** · 12-01-2012, 09:57 AM

Kingfish999 · 12-01-2012, 10:36 AM

float probably sunk in hte tank. happened to both my trucks

task1 · 12-01-2012, 11:11 AM

X2 on d float. Pull your tank n move sender lever watch for movt in dash n inspect float

KYboy · 12-01-2012, 12:50 PM

Ill do that soon as I get time thanks guys. You guys know where I can get the factory fender emblems?

inxy · 12-01-2012, 07:38 PM

Ebay

**sackman9975** · 12-01-2012, 07:51 PM

Quote:

Originally Posted by wdford

ground the sender wire to see if it goes to full. If it does then your sender is the likely culprit.

Do this first before dropping the tank

12-01-2012, 04:15 AM	#1
KYboy Registered User Join Date: Dec 2012 Posts: 2 iTrader: (0)	Fuel gauge won't work I have a 1991 Bronco and the fuel gauge don't work any advice would help

12-01-2012, 08:06 AM	#3
wdford Fullsize Member Join Date: Feb 2011 Location: Rancho Cordova, CA Posts: 152 iTrader: (0) Bronco Info: 1995 EB 351W, E40D	ground the sender wire to see if it goes to full. If it does then your sender is the likely culprit. __________________

12-01-2012, 09:57 AM	#4
BRONCONUT Local # 40 Boilermakers Join Date: May 2007 Location: Hartford,KY Posts: 11,164 iTrader: (20) Bronco Info: 5.8 w/ MSD, optima, K&N, OBA, 8 lugs, Detroit w/ 4.88's, 4 wheel disc brakes & Kick ass camo,	http://www.broncolinks.com/index.php?index=1 __________________ My Supermotors Rust Repair Bumper Build SAS

12-01-2012, 10:36 AM	#5
Kingfish999 Nothing beets a Fullsize Join Date: May 2010 Location: Palm Harbor FL Posts: 2,547 iTrader: (10) Bronco Info: 96 Bronco 5.0, 88 Bronco 5.8	float probably sunk in hte tank. happened to both my trucks __________________ ---96 Eddie Bauer 302-----------88 XLT 351 Carb------ -----E4OD 1356 4.10-------------C6 1356 3.55-------- ---8-lug TTB/D60 Rear--------------TTB/8.8----------- --Daily Driver/Prerunner---------Mudder/Submarine-----

12-01-2012, 12:50 PM	#7
KYboy Registered User Join Date: Dec 2012 Posts: 2 iTrader: (0)	Thanks Ill do that soon as I get time thanks guys. You guys know where I can get the factory fender emblems?

12-01-2012, 11:11 AM	#6
task1 Registered User Join Date: Mar 2005 Location: el paso tx Posts: 133 iTrader: (0) Bronco Info: '79 400m 0.30 over comp cam edelbrock intake/carb double exhaust 4in lift 33in bfgs	X2 on d float. Pull your tank n move sender lever watch for movt in dash n inspect float

12-01-2012, 07:38 PM	#8
inxy Registered User Join Date: Mar 2012 Location: North Port, Fl Posts: 75 iTrader: (0) Bronco Info: 88 Bronco 351 C6 33's redhead/saginaw	Ebay

Remove Advertisements Sponsored Links
Full-Size Bronco Forum Advertisement

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode