![]() |
|
![]() |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Registered User
|
Okay fellow bronco owners.
I have a 1993 EB full size. My son has been driving it and now he is going into the navy. This is what I have done do it New motor 22,000 miles on it Rebuilt transmission on it 20,000 miles on it exterior is fair to good. The interior is good to worn. (seats are torn, some handles on the seats do not work, the dash above the glove compartment is cracked. carpet is worn. I cut an access panel in the back to reach the fuel pump. The alternator is 1 and a half years old. The exhaust pipes and tail pipes are 3 years old. four wheel drive is not working on the inside but I put the 4 wd locking hubs on it. My question is do you think I could get at least 4,000 dollars out of this beast? I know I have a lot invested in it, but I will have no use for it. Thanks for any input that you guys might post. Here is the question. Do you think I could get 4,000 out of this beast? |
|
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#2 | |
|
*~*~*~*~*~*~*~*
![]() Join Date: Dec 2007
Location: Livonia Michigan
Posts: 5,961
iTrader: (41) Bronco Info: 1995 Eddie Bauer 357w, E303 cam on S/D, Warn premium hubs, 3 inch exhaust with flowmaster 40
|
Probably....................not a chance.
Quote:
This is not a tech thread so be prepared to find it elsewhere......
__________________
~ Scott ~ ~My Exhaust clip on YouTube ~ 204k on the odometer and no longer a daily driver. ~ ~ Bronco owner/Driver/Mechanic/Enthusiast for 21 years ~
|
|
|
|
|
|
|
#4 |
|
Beach bumming it....
![]() ![]() Join Date: May 2011
Location: Virginia Beach, VA
Posts: 10,589
iTrader: (3) Bronco Info: 88 XLT 351W C6 With way too much to list here done to it.
|
Your looking at more 3k if you can provide all paperwork on the rebuilds.
__________________
Josh 88 XLT with rebuilt 351W and C6. 7" lift on 35" 12.50 mickey thompson baja claw mtz's, SUMMIT headers, direct fit MagnaFlow High Flow cat, No mufflers, Saginaw, TRE flip, 3g 160 amp alt, HIDs, sliders, and custom bumpers with KCs. FSB Official Health and Fitness Thread My Build - El Surfista |
|
|
|
|
|
#6 |
|
Fullsize Member
![]() Join Date: Oct 2010
Location: Emerald, PA
Posts: 1,979
iTrader: (8) Bronco Info: 94 C150, 351/zf,5"lift,35" xterains,flow40, mac headers,sag swap, elec fan, 4WDB
|
Id put it in the 2.5-3 range. Again thats with paperwork on the motor & trans. 4x not working is only helping lower the price. Pictures would help us judge esp pics of the rear quarters and lower tailgate.
__________________
![]() Visit my build thread- http://www.fullsizebronco.com/forum/...d.php?t=211825 |
|
|
|
| Sponsored Links | |
Advertisement | |
![]() |
|
| Thread Tools | |
| Display Modes | |
|
|