Ultimate SAS project source - FSB Forums
Register Home Forums Active Topics Photo Gallery All Albums Mark Forums Read Auto EscrowInsurance FSB Store
FullsizeBronco.com is the premier Ford Bronco Forum on the internet. Registered Users do not see the above ads.
Reply
 
Thread Tools Display Modes
Old 05-13-2006, 03:24 PM   #1
Larston
Fullsize Member
 
Larston's Avatar
 
Join Date: Jan 2004
Location: Northern Colorado
Posts: 3,109
iTrader: (2)
Bronco Info: Broncoless, but I got a 1987 F250 to make up for it
Ultimate SAS project source

I tried to do some searching this morning for the info we keep telling people to search for, and I had a tough time coming up with anything meaningful. A lot of good stuff was posted over the last few years, but it has been covered up by a ton of other posts screaming "SEARCH!!!"

So, I'd like to start a thread to hold links to all the good SAS build info there is on this site. I'd like the links to point to solid, complete SAS projects of all types. I'm pretty inundated with work these days and my research time is limited, so post up links to threads you think present good SAS info and I'll add them to this post. We're pretty proud of the fact that FSB is the number one source for Bronco info, lets make it easier for people to find it

As I started digging through some of these threads, I found that not all projects were documented in a single posting. So, long term projects with multiple postings will have multiple links.

Coil D44

Brian Solderblom's archived swap page.
http://www.fullsizebronco.com/bronco/tech/D44solid/

Crazed
http://fullsizebronco.com/forum/showthread.php?t=61519

Shadofax
http://fullsizebronco.com/forum/showthread.php?t=32654
http://fullsizebronco.com/forum/showthread.php?t=44149
http://fullsizebronco.com/forum/showthread.php?t=47224
http://fullsizebronco.com/forum/showthread.php?t=45403
http://fullsizebronco.com/forum/showthread.php?t=43805
http://fullsizebronco.com/forum/showthread.php?t=42629

Bronco23
http://fullsizebronco.com/forum/showthread.php?t=46102
http://fullsizebronco.com/forum/showthread.php?t=52719

Daves from a few years ago. This page also shows rocker type rear spring mounts.
http://www.wt4x4.net/tech/SAS.htm

Lars915's (aka Larston) solid swap page. Lot's of other tech on this site.
http://www.geocities.com/lars915/straightaxle.htm

Plug Ugly
http://www.supermotors.org/clubs/sup...s=8170#content

Jermil
http://fullsizebronco.com/forum/showthread.php?t=38319

GearHead
http://www.supermotors.org/vehicles/...=23586#content

The Beater
http://fullsizebronco.com/forum/showthread.php?t=62079

Coil D60

Woodydog's project
http://fullsizebronco.com/forum/showthread.php?t=63845

Plug Ugly
http://www.supermotors.org/clubs/sup...=13694#content

Chris85xlt
http://fullsizebronco.com/forum/showthread.php?t=49260

COLOR="Red"]da_offroadnut[/color]
http://fullsizebronco.com/forum/show...hlight=project

OX's original coil 60 writeup
http://www.projectbronco.com/Technic...conversion.htm

Leaf D44

Redwagon
http://fullsizebronco.com/forum/showthread.php?t=65694

Leaf D60

The God of Leaf SAS thread
http://fullsizebronco.com/forum/showthread.php?t=24977

BigNorm
http://fullsizebronco.com/forum/showthread.php?t=41960
http://fullsizebronco.com/forum/showthread.php?t=30366
http://fullsizebronco.com/forum/showthread.php?t=17014
http://fullsizebronco.com/forum/showthread.php?t=18620
http://www.supermotors.org/clubs/sup...d=2538&s=16448

Larston
http://fullsizebronco.com/forum/showthread.php?t=34056
http://www.supermotors.org/vehicles/...=21976#content



Other axles

Rockwell discussion
http://fullsizebronco.com/forum/showthread.php?t=65713


Rear axle swaps

D70U
http://www.supermotors.org/vehicles/...=23395#content


Other Info

Double flaring brake lines
http://fullsizebronco.com/forum/showthread.php?t=67422

2BigBroncos tech site. Lots of info.
http://www.2bigbroncos.com/technical/index.html

2BigBronco's Dana 60 FAQ
http://www.2bigbroncos.com/technical/d60/index.html

8-lug swap for your SAS so you can run a 3/4- or 1-ton rear axle
http://www.off-road.com/ford/bigbron...lug/index.html
__________________
My Superford Site
Larston is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 05-15-2006, 11:03 AM   #2
Redwagon
rolling Rolling ROLLING....
 
Join Date: Jun 2005
Location: sol cal (west covina)
Posts: 22,521
iTrader: (34)
Bronco Info: 93 Cherokee
heres mine that is almost completed.
leaf sprung d44.
http://fullsizebronco.com/forum/showthread.php?t=65694
__________________
Tim

Newest token Jeep owner....

Redwagon is offline   Reply With Quote
Old 06-23-2006, 02:58 PM   #3
bronco boy
Registered User
 
bronco boy's Avatar
 
Join Date: Apr 2003
Location: Coquitlam, B.C., Canada
Posts: 3,095
iTrader: (0)
Bronco Info: No More Bronco
Might as well get my D44 Leaf swap in here.....

Personal page:
http://chrisb.users.superford.org/Projects/SAS.html

SuperMotors:
http://www.supermotors.org/clubs/sup...=13014#content

Parts list:
http://chrisb.users.superford.org/Pr...arts_List.html
__________________
Chris B
bronco boy is offline   Reply With Quote
Old 09-04-2006, 05:12 PM   #4
Shadofax
Owned 18yrs, now for 20
 
Shadofax's Avatar
 
Join Date: Jun 2003
Location: where havn't I lived? Now in Erie, CO
Posts: 16,880
iTrader: (16)
Bronco Info: 95XLT351 E4OD SAS 44/ARB/Alloy shafts-joints. D60 rear/Detroit. 4wheel disc,37" MTR Kevlar, 4.56etc.
I wasn't sure where to post this, but I don't want it to go away since it is an FYI about the commonly discussed subject of steering, and use of the very common chevy Tie Rod Ends (1/2 ton to 1 ton applications).

Just a clarification that when folks talk about chevy TRE's (don't worry about what size), you still need to understand that different stores sell different brands, and there usually are cheapos and good stuff.

So no matter what your application for the Chevy TRE stuff, look for a known/quality brand, or it'l kinda be like you buying a big gun, and accidently shooting yourself in the foot (when the cheapo fails). Just so ya know, Parts Mike sells Mcquay Norris, as does the shucks/kragen stores, not sure about the zone. this is good OEM stuff reasonable in price. MN is owned now I think by Affinia, which also owns Spicer, Wix, and Raybestos.
__________________
______________________
Click my supermotors link for tech on TCase, SAS, OBA, Soft Top, Overhead Console, Stock bumper Winch install, much more..:
http://www.supermotors.net/registry/628



Shadofax is offline   Reply With Quote
Old 10-12-2006, 02:38 PM   #5
bossind
Retired Staff
 
bossind's Avatar
 
Join Date: Oct 2004
Location: Oromocto NB Canada
Posts: 8,530
iTrader: (3)
Bronco Info: 1996 EB Bronco, 5.8, E40D, Dana 44 SAS, 4.88 gears. 35" SuperSwampers
What the hell, mine belongs here as well.

http://fullsizebronco.com/forum/showthread.php?t=69270
bossind is offline   Reply With Quote
Old 10-16-2006, 03:16 PM   #6
peteyg
Registered User
 
peteyg's Avatar
 
Join Date: Apr 2004
Location: Temecula, CA
Posts: 2,519
iTrader: (4)
Bronco Info: 1978 Bronco XLT, 6" lift, 31's/35's/37's
This is kinda different, but I went through every issue you guys go through with a Bronco, plus some extras that you don't have to deal with, and actually used this site as a reference for putting my RA swap into my Jeep. I have a full width Bronco '44 on extended radius arms under the front of my Jeep now:

http://www.jeepaholics.com/support/t...TOPIC_ID=49320
__________________
I'm Bronco-less again, but it was For A Good Cause
peteyg is offline   Reply With Quote
Old 01-18-2008, 08:55 AM   #7
miesk5
Fullsize Member
 
miesk5's Avatar
 
Join Date: Oct 2003
Location: NJ
Posts: 12,761
iTrader: (2)
Bronco Info: 96 XL 5.0 E4OD, Man Xfer/Hubs
he has his info and other tech projects here now;
SAS Installation, Dana 44 in an 89
Source: by Brian S at FSB


and his orig site at soderblom.net via web.archive.org
__________________
96 XL 5.0 E4OD, Man Xfer/Hubs
USN & DoD Planner (ret)
THANKS to ALL WHO SERVE!

my broncolinks.com was "disturbed"; but some sections are archived @ [url]http://web.archive.org/web/20121009110424/http://www.broncolinks.com/index.php
select a LINK, Right Click & Hit Properties; copy the second HTTP address; paste in a new browser window or Tab to see original page
miesk5 is offline   Reply With Quote
Old 01-19-2008, 10:21 AM   #8
miesk5
Fullsize Member
 
miesk5's Avatar
 
Join Date: Oct 2003
Location: NJ
Posts: 12,761
iTrader: (2)
Bronco Info: 96 XL 5.0 E4OD, Man Xfer/Hubs
yw.
If you want, copy some Links from my site; I am trying to improve nomenclature now, but haven't gotten to SAS yet.
__________________
96 XL 5.0 E4OD, Man Xfer/Hubs
USN & DoD Planner (ret)
THANKS to ALL WHO SERVE!

my broncolinks.com was "disturbed"; but some sections are archived @ [url]http://web.archive.org/web/20121009110424/http://www.broncolinks.com/index.php
select a LINK, Right Click & Hit Properties; copy the second HTTP address; paste in a new browser window or Tab to see original page
miesk5 is offline   Reply With Quote
Old 01-19-2008, 01:54 PM   #9
reptillikus
ate lug
 
reptillikus's Avatar
 
Join Date: Apr 2003
Location: Reading, PA
Posts: 7,478
iTrader: (4)
Bronco Info: 88ish bronco(?)/96 F250; both with D60s
Never did a thread or a write-up, but i do have a photogallery of mine

http://4x4.forensick.net/88bronco/im...p?imagedir=sas
reptillikus is offline   Reply With Quote
Old 01-19-2008, 04:10 PM   #10
Shadofax
Owned 18yrs, now for 20
 
Shadofax's Avatar
 
Join Date: Jun 2003
Location: where havn't I lived? Now in Erie, CO
Posts: 16,880
iTrader: (16)
Bronco Info: 95XLT351 E4OD SAS 44/ARB/Alloy shafts-joints. D60 rear/Detroit. 4wheel disc,37" MTR Kevlar, 4.56etc.
Quote:
Originally Posted by reptillikus View Post
Never did a thread or a write-up, but i do have a photogallery of mine

http://4x4.forensick.net/88bronco/im...p?imagedir=sas
Isn't that funny Kev? KyleQ PM'd the other day...had been looking at Crazed's SAS and could not find mine. I didn't realize until I searched back a ways, I never actually did a full writeup. Several others had just done D44's, and well, I ended up with several threads about issues, fixes, and some upgrades like the frame boxing for the RA's.


And Al, I should have known you'd have the link.
__________________
______________________
Click my supermotors link for tech on TCase, SAS, OBA, Soft Top, Overhead Console, Stock bumper Winch install, much more..:
http://www.supermotors.net/registry/628



Shadofax is offline   Reply With Quote
Old 01-23-2008, 03:56 PM   #11
Larston
Fullsize Member
 
Larston's Avatar
 
Join Date: Jan 2004
Location: Northern Colorado
Posts: 3,109
iTrader: (2)
Bronco Info: Broncoless, but I got a 1987 F250 to make up for it
Quote:
Originally Posted by Shadofax View Post
I never actually did a full writeup. Several others had just done D44's, and well, I ended up with several threads about issues, fixes, and some upgrades like the frame boxing for the RA's.
Yeah, that's why everyone has one link, and you have SIX! Showoff
__________________
My Superford Site
Larston is offline   Reply With Quote
Old 01-23-2008, 04:11 PM   #12
1clean5.8
Crusher Mike
 
1clean5.8's Avatar
 
Join Date: Nov 2004
Location: SanTan Valley, AZ
Posts: 5,980
iTrader: (10)
Bronco Info: 1991 Eddie Bauer 5.8. Flowmaster exuast, SAS 35 mickeys 7" lift, 4.88s locked, Viar OBA
Heres Mine
http://www.supermotors.net/vehicles/registry/7260/34321
__________________


Quote:
Originally Posted by MYXD40 View Post
okay so scrap the 1 ton and throw in a D60?
1clean5.8 is offline   Reply With Quote
Old 04-01-2008, 04:09 PM   #13
crawler
Registered User
 
crawler's Avatar
 
Join Date: Jul 2004
Location: Spring Valley, CA
Posts: 2,326
iTrader: (2)
Bronco Info: 1978 Bronco 351m, full cage SOLD!!!!!! now 73 CJ 5
What about coilover?

http://www.fullsizebronco.com/forum/...ad.php?t=49626
__________________
crawler is offline   Reply With Quote
Old 10-02-2008, 08:08 PM   #14
Midnyte
Registered User
 
Midnyte's Avatar
 
Join Date: Mar 2005
Location: St. George, UT
Posts: 390
iTrader: (0)
Bronco Info: 1989 F-150, 5.8, C6, D44 SAS, 9" Lift, 4.10's, 37" Toyo MTs
Here's a link to my SAS... (9" & 37's, D44)

http://fullsizebronco.com/forum/showthread.php?t=125029
Midnyte is offline   Reply With Quote
Old 01-17-2011, 11:41 AM   #15
ColoradoBronc
Project Re-Build & Finish
 
ColoradoBronc's Avatar
 
Join Date: Apr 2003
Location: Colorado
Posts: 1,203
iTrader: (0)
Bronco Info: 88 Bronco XLT, 81 Bronco XLT
Just happened to pop in and check things out, it's been a long time. Here is mine.
http://www.fullsizebronco.com/forum/...ad.php?t=23412
__________________


My Superford
ColoradoBronc is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

  FSB Forums > Bronco Discussions > Solid Axle Swaps


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 02:55 AM.


2003-2009 FullSizeBronco.com. All rights reserved