FullSizeBronco.com - 78 - 96 Ford Bronco offroad club, forums, tech, installs

marriedguy1 · 12-03-2003, 10:57 AM

Since I broke my drive shaft last Sunday I've been looking at getting another made for spare and found a good shop here in San Antonio. What do you know they have a pretty good web site.
http://www.thrashdriveshaft.com/
Bunch of good guys working there and they have a nice clean shop in case you're wondering.

TxTaurus74 · 12-04-2003, 11:25 AM

Thanks for that link. I have been wanting to get a real beefed up rear drive shaft. And I pass through San Antonio quite a bit. Will have to stop by and talk to these guys. Have you got your shaft yet? Is it pretty heavy duty?

marriedguy1 · 12-04-2003, 08:02 PM

Actually I just bought some parts form these guys, but I'm gonna get a spare shaft made in the near future.

freak · 12-04-2003, 08:47 PM

I just had a shaft made by High Angle Driveline's.Excellent craftsmanship work great,will handle 1000hp and run at a constant 32 degree angle.Has a 1350 cv joint and 1350 u-joint at the diff end.

12-03-2003, 10:57 AM	#1
marriedguy1 Registered User Join Date: Mar 2003 Location: San Antonio Posts: 357 iTrader: (0) Bronco Info: 1994, 6 inch lift, 35" BFG MTs,Superrunner steering, rear lock right marriedguy1s Garage	Driveshaft Specialist Since I broke my drive shaft last Sunday I've been looking at getting another made for spare and found a good shop here in San Antonio. What do you know they have a pretty good web site. http://www.thrashdriveshaft.com/ Bunch of good guys working there and they have a nice clean shop in case you're wondering. __________________ Shane: A gun is a tool, Marion, no better or no worse than any other tool, an axe, a shovel or anything. A gun is as good or as bad as the man using it. Remember that. Here's to cheating, stealing, fighting and drinking. If you cheat, may it be a death; if you steal, may it be a heart; if you fight, may it be for your Brother; and if you drink, may it be with me.

12-04-2003, 11:25 AM	#2
TxTaurus74 Registered User Join Date: Oct 2003 Location: South Texas Posts: 1,574 iTrader: (0) Bronco Info: 95 Bronco 351W w/ D60 Front & Sterling Rear TxTaurus74s Garage	Thanks for that link. I have been wanting to get a real beefed up rear drive shaft. And I pass through San Antonio quite a bit. Will have to stop by and talk to these guys. Have you got your shaft yet? Is it pretty heavy duty? __________________ My Bronco!

12-04-2003, 08:47 PM	#4
freak Registered User Join Date: Nov 2003 Posts: 92 iTrader: (0) Bronco Info: 78 Bronco/9" lift/38" swamper's freaks Garage	I just had a shaft made by High Angle Driveline's.Excellent craftsmanship work great,will handle 1000hp and run at a constant 32 degree angle.Has a 1350 cv joint and 1350 u-joint at the diff end. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

		FSB Forums > For Sale/Where to Buy > Vendor Reviews
Driveshaft Specialist

Remove Advertisements Sponsored Links
FSB Forums Advertisement

12-04-2003, 08:02 PM	#3
marriedguy1 Registered User Join Date: Mar 2003 Location: San Antonio Posts: 357 iTrader: (0) Bronco Info: 1994, 6 inch lift, 35" BFG MTs,Superrunner steering, rear lock right marriedguy1s Garage	Actually I just bought some parts form these guys, but I'm gonna get a spare shaft made in the near future.