What Did YOUR Bronco Get For Christmas? - Page 3 - Ford Bronco Forum
Reply
 
LinkBack Thread Tools Display Modes
post #41 of 55 (permalink) Old 12-27-2011, 04:25 PM
Registered User
 
tonyroc14's Avatar
 
Join Date: Dec 2009
Location: Jacksonville, NC
Posts: 2,928
Bronco Info: 1993 XLT 5.8 sold,1991 XLT 5.8, 1982 F150 4x4 5.0
iTrader: (2)
wheel bearings, motor mount, spark plugs, MSD coil, cap and rotor, motorcraft 9mm wires, coolant, and some new stainless steel hose clamps....

I am forgetting something...

OH! A 12,000lb winch HF winch
tonyroc14 is offline  
Sponsored Links
Advertisement
 
post #42 of 55 (permalink) Old 12-27-2011, 04:37 PM
Wrenching for a Livin'
 
magnumpi's Avatar
 
Join Date: Jan 2004
Location: Sherrills Ford, NC
Posts: 6,951
Bronco Info: '85 Ford Bronco XLT.
iTrader: (20)
New laptop for tuning, and I'm going to get a dash and tailgate on Thursday.

My SuperFord
'85 Bronco......
Welded 14 bolt, HPKingpin D60 w/ lockright, ZF5, NP205, 4.88 gears, SMPFI 393 w/ EDIS(gufx strat), Chevy 52s Front, Inboarded Chevy 63s Rear, DOM heim steering, DOM cage, Saginaw pump, 3/8" fuel system, 200amp 3G Alternator....

ASE Master Automotive Technician
ASE Master Medium/Heavy Truck Technician
magnumpi is offline  
post #43 of 55 (permalink) Old 12-27-2011, 05:54 PM
Engineer
 
ToddACimer's Avatar
 
Join Date: Apr 2004
Location: Oshkosh, Wi
Posts: 13,168
Bronco Info: 95 Eddie Bauer
iTrader: (19)
Replaced my stock Superduty grill


With an 03-07 grill

1995 Ford Bronco Eddie Bauer 351W 2.5" RC Front Lift. JBG 3" Rear Springs. 17" M/T Classic III's and 285/70/17 Toyo Open Country A/T II, 4.56 gears trac-loc f/r. Street Toy
ToddACimer is offline  
post #44 of 55 (permalink) Old 12-27-2011, 08:32 PM
Fullsize Member
 
Worldclasssniper's Avatar
 
Join Date: Mar 2009
Location: Canyon Country CA
Posts: 2,629
Bronco Info: 92XLT D60/10.25 Disks 9 in 40's 351 jba headers k&n intake warn hubs Edelbrock Performer heads
iTrader: (2)
She got to come home after almost a year


My Build

Built not Bought!!

WEST COAST BRONCO MAFIA
Worldclasssniper is offline  
post #45 of 55 (permalink) Old 12-27-2011, 08:37 PM
Registered User
 
Join Date: May 2006
Location: Gilbert Arizona
Posts: 959
Bronco Info: 1992 Eddie Bauer 351W want a lift!!
iTrader: (8)
mastercraft seats!

http://memimage.cardomain.net/member...920_1_full.jpg

1992 Eddie Bauer 351W
4 inch Rancho lift kit 33" BFG'S K&N Sixlitre upgrade KC Lights Pioneer deck Infinity Subwoofer!!!
biggies92bronco is offline  
post #46 of 55 (permalink) Old 12-27-2011, 09:58 PM
Registered User
 
ProZach's Avatar
 
Join Date: Nov 2011
Location: Chandler, AZ
Posts: 93
Bronco Info: 1990 5.0 Automatic, 4 inch lift, and Dana 60 rear lincoln locked
iTrader: (0)
some raidus arm bushings, axle pivot bushings, and new radius arm drop brackets.
Parents put together a badass firstaid kit with the help of a family friend who is in the air force.
Oh and I got a go pro HD hero
ProZach is offline  
post #47 of 55 (permalink) Old 12-27-2011, 11:22 PM
Registered User
 
Bronco Boy 88's Avatar
 
Join Date: Aug 2011
Location: On, Canada
Posts: 168
Bronco Info: 88 Bronco 302 5.0L efi
iTrader: (0)
Quote:
Originally Posted by ToddACimer View Post
Replaced my stock Superduty grill


With an 03-07 grill
i want to do that on mine too. did u need to do any trimming or anything? also do u think the newer lights will fit too?

When in doubt, throttle it out
4x4, for when big balls just aren't enough.
Bronco Boy 88 is offline  
post #48 of 55 (permalink) Old 12-27-2011, 11:56 PM
FSM Lifetime
 
jfourdyce's Avatar
 
Join Date: Nov 2011
Location: Flagstaff, Arizona
Posts: 498
Bronco Info: 1989 Eddie Bauer 5.8, C6, True Trac diffs, 4.56 gears, 4" C&T lift, 130A 3G Alt, 35" Grabber AT2s
iTrader: (2)
Lotsa trim parts, and maybe a new tailgate :)
jfourdyce is online now  
post #49 of 55 (permalink) Old 12-28-2011, 09:56 AM
Engineer
 
ToddACimer's Avatar
 
Join Date: Apr 2004
Location: Oshkosh, Wi
Posts: 13,168
Bronco Info: 95 Eddie Bauer
iTrader: (19)
Quote:
Originally Posted by Bronco Boy 88 View Post
i want to do that on mine too. did u need to do any trimming or anything? also do u think the newer lights will fit too?
I had to cut 1" off the bottom all the way across. Then I had to cut the honeycomb frame 1" shorter. The top bolts right in and the bottom is zip tied. The headlights would fit but you need to extensively modify the header panel or get one from a 04-07 truck.

1995 Ford Bronco Eddie Bauer 351W 2.5" RC Front Lift. JBG 3" Rear Springs. 17" M/T Classic III's and 285/70/17 Toyo Open Country A/T II, 4.56 gears trac-loc f/r. Street Toy
ToddACimer is offline  
post #50 of 55 (permalink) Old 12-28-2011, 10:12 AM
Registered User
 
Bronco Boy 88's Avatar
 
Join Date: Aug 2011
Location: On, Canada
Posts: 168
Bronco Info: 88 Bronco 302 5.0L efi
iTrader: (0)
Quote:
Originally Posted by ToddACimer View Post
I had to cut 1" off the bottom all the way across. Then I had to cut the honeycomb frame 1" shorter. The top bolts right in and the bottom is zip tied. The headlights would fit but you need to extensively modify the header panel or get one from a 04-07 truck.
thanks for the info man

When in doubt, throttle it out
4x4, for when big balls just aren't enough.
Bronco Boy 88 is offline  
post #51 of 55 (permalink) Old 12-28-2011, 10:46 AM
OMF
 
raleigh's Avatar
 
Join Date: Jun 2011
Location: Viva Las Vegas
Posts: 2,919
Bronco Info: 1979/1972 "Hybrid Hilda"
iTrader: (3)
Garage
The Bronco didn't get anything, it's little brother ('98 Explorer Sport) did though. New wheels and ball joints, the wife smacked a curb when she slid on some ice and BROKE one of the Ford Aluminum wheels. It was cheaper to pick up a set of MKW wheels than 1 Ford wheel!

Dave
Vote for me FOTM!


1979/1972 "Hybrid Hilda"
Built 400, NP435/Strongbox Doubler/NP205
2007 Superduty Axles, Chomo'd, Superjoints, and Locked
110" WB, Body narrowed 6" and armored up!
raleigh is offline  
post #52 of 55 (permalink) Old 12-28-2011, 01:54 PM
Registered User
 
rcracerx's Avatar
 
Join Date: Nov 2004
Location: Salem Oregon
Posts: 3,150
Bronco Info: 3.9 m5od 35" cooper STT Pros, removed sway bars, SAS, M15000
iTrader: (0)
Garage
one of these...now to find some poles to make it work http://www.eatel.net/~dacinc/trucks.html

BIG BABIES!!!
rcracerx is offline  
post #53 of 55 (permalink) Old 12-28-2011, 08:55 PM
Registered User
 
MarshBronco's Avatar
 
Join Date: Jul 2011
Location: Kaplan, La
Posts: 151
Bronco Info: 1993 with a 302,e40d, bw 1345, 4 inch body lift, 33 inch bajas camo paint, homemade bumper bed lined
iTrader: (0)
Mine got some herculiner for the interior and a new good set of tools to work on her.

Supermotors page. http://www.supermotors.net/users/MarshBronco

"America will never be destroyed from the outside. If we falter and lose our freedoms it will be because we destroyed ourselves." - Abraham Lincoln
MarshBronco is offline  
post #54 of 55 (permalink) Old 12-29-2011, 12:01 AM
A broke kid with a bronco
 
catsnw's Avatar
 
Join Date: Jan 2011
Location: Lafayette, La
Posts: 4,067
Bronco Info: 1995 EB bronco 5.8, auto, true duals, k&n intake, 3G alternator, 12 front lights (more to come!)
iTrader: (7)
A pair of kc daylighters for the front bumper (yay! More lights!), seat covers, and a set of wrenches.

Quote:
Originally Posted by 88LiftdBronco View Post
So what you're saying is, that when you see a penis you think of another guy?

٩(●̮̮)۶

catsnw is online now  
post #55 of 55 (permalink) Old 12-29-2011, 12:39 AM
Registered User
 
dhpt99's Avatar
 
Join Date: Jun 2008
Location: south florida
Posts: 971
Bronco Info: Its a 1991 with automatic hubs and a manuel engager and 155,000 miles
iTrader: (0)
12k winch (might go on the scout), new tail light, gift cards and the mustang got some race shocks


1991 Bronco 5.0 9 inch lift, 37" military tires
1974 IH Scout II 345 Right Hand Drive
1989 5.0 Mustang Notch
dhpt99 is offline  
Sponsored Links
Advertisement
 
Reply

  Ford Bronco Forum > Other Forums > Anything Else

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Bronco Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself. DO NOT USE Gmail.com accounts. If you only have a Gmail.com email please contact the administrator here

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome