Silent One's Build/Upgrade Thread (95) - Ford Bronco Forum
 49Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 466 (permalink) Old 05-25-2010, 11:09 PM Thread Starter
Fullsize Member
 
silent one's Avatar
 
Join Date: Dec 2004
Location: Northport,N.Y.
Posts: 7,068
Bronco Info: 1995 sport,6''SAS 37's streetlocks 4.56's ARB,BroncoAir rear bumper HeftyFabworks front bumper
iTrader: (16)
Silent One's Build/Upgrade Thread (95)

So i have decided to do a build/upgrade a thread instead of making a bunch of diffrent threads.

So if you don't know my bronco here is what it looks like.(older pic)



Some of the upgrades..
6" lift with rear springs
35's on 15x10 Mickey Thompson wheels
4.56 gears
6Litre tune up
Clear headlights and tail light with LED bulbs
BroncoAir rear bumper
Hefty Fab Front bumper
Rock slider with Hefty Fab steps(see this thread)
Full stainless steel exhaust( see below)
Custom HI-Lift mount
And i am sure i am forgetting stuff


So to start i did a full exhaust system a few weeks ago, Bassana Y pipe, Magnaflow cat, Hooked aero chamber muffler and a magnaflow 13005 3" tail pipe.
The awesome muffler i had on before.



And the new stuff all stainless steel.





JIMBO SIX likes this.


KEEP CALM AND BRONCO ON
Silent One's Supermotors Page
January 2010 FOTM Winner
@silentjde on instagram

Last edited by silent one; 05-28-2010 at 08:48 PM. Reason: Added stuff
silent one is online now  
Sponsored Links
Advertisement
 
post #2 of 466 (permalink) Old 05-25-2010, 11:21 PM Thread Starter
Fullsize Member
 
silent one's Avatar
 
Join Date: Dec 2004
Location: Northport,N.Y.
Posts: 7,068
Bronco Info: 1995 sport,6''SAS 37's streetlocks 4.56's ARB,BroncoAir rear bumper HeftyFabworks front bumper
iTrader: (16)
Next up are my sliders and steps. I bought a set of slider from another member that were built by another member and they sat for a while and i finally put them on.





And i had Hefty make me a set of his slider steps.





I also had him make a bumper step for me so its easier to get stuff ou of the back.





KEEP CALM AND BRONCO ON
Silent One's Supermotors Page
January 2010 FOTM Winner
@silentjde on instagram
silent one is online now  
post #3 of 466 (permalink) Old 05-25-2010, 11:26 PM Thread Starter
Fullsize Member
 
silent one's Avatar
 
Join Date: Dec 2004
Location: Northport,N.Y.
Posts: 7,068
Bronco Info: 1995 sport,6''SAS 37's streetlocks 4.56's ARB,BroncoAir rear bumper HeftyFabworks front bumper
iTrader: (16)
I also had this show up last week.



With this in it.



More on this tomorrow.


KEEP CALM AND BRONCO ON
Silent One's Supermotors Page
January 2010 FOTM Winner
@silentjde on instagram
silent one is online now  
Sponsored Links
Advertisement
 
post #4 of 466 (permalink) Old 05-25-2010, 11:28 PM
Registered User
 
Ole Nasty's Avatar
 
Join Date: Sep 2009
Location: Saginaw, Tx
Posts: 2,971
Bronco Info: 1989 F350 cclb 4x4 w/'97 7.3l powerstroke
iTrader: (2)
Great looking rig! Besides an SAS, what other plans do you have for it? What else has been doon to it?

Quote:
Originally Posted by Kenny [email protected]#*ing Powers
Sure, I've been called a xenophobe, but the truth is, I'm not. I honestly just feel that America is the best country and all the other countries aren't as good. That used to be called 'patriotism'.
My YouTube Channel-http://www.youtube.com/user/OleNasty79
Ole Nasty is offline  
post #5 of 466 (permalink) Old 05-25-2010, 11:43 PM Thread Starter
Fullsize Member
 
silent one's Avatar
 
Join Date: Dec 2004
Location: Northport,N.Y.
Posts: 7,068
Bronco Info: 1995 sport,6''SAS 37's streetlocks 4.56's ARB,BroncoAir rear bumper HeftyFabworks front bumper
iTrader: (16)
Quote:
Originally Posted by Ole Nasty View Post
Great looking rig! Besides an SAS, what other plans do you have for it? What else has been doon to it?
Thanks, i guess you'll just have wait and see.

I can do a list tomorrow of all the stuff done to it.


KEEP CALM AND BRONCO ON
Silent One's Supermotors Page
January 2010 FOTM Winner
@silentjde on instagram
silent one is online now  
post #6 of 466 (permalink) Old 05-25-2010, 11:50 PM
Registered User
 
Ole Nasty's Avatar
 
Join Date: Sep 2009
Location: Saginaw, Tx
Posts: 2,971
Bronco Info: 1989 F350 cclb 4x4 w/'97 7.3l powerstroke
iTrader: (2)
Sweet, I love me a build thread.

Quote:
Originally Posted by Kenny [email protected]#*ing Powers
Sure, I've been called a xenophobe, but the truth is, I'm not. I honestly just feel that America is the best country and all the other countries aren't as good. That used to be called 'patriotism'.
My YouTube Channel-http://www.youtube.com/user/OleNasty79
Ole Nasty is offline  
post #7 of 466 (permalink) Old 05-26-2010, 01:31 AM
Registered User
 
jasoncarpenter1's Avatar
 
Join Date: Aug 2007
Location: Ontario, California
Posts: 2,810
Bronco Info: 94 bronco, why kill it if you can't over kill it
iTrader: (0)
nice build so far, i will be following this one. hefty does nice work......

west coast bronco mafia
there is a 100 ways to build a bronco this is mine
fuel injected 460 c6 leaf spring dana 60 kingpin powerloc front, sterling 10.25 detroit rear 5.13 gears 42" IROK's...Build it ,Break it, Fix it..........
I HOPE F.O.T.M./Y. FAILS
jasoncarpenter1 is offline  
post #8 of 466 (permalink) Old 05-26-2010, 09:20 AM
Need a Bumper?
 
Hefty's Avatar
 
Join Date: Jun 2008
Location: Monument, Colorado
Posts: 4,770
Bronco Info: 93 Bronco 7in SAS 38's 4.56 and rear detroit front e-locker, 72 bronco under construction
iTrader: (19)
Quote:
Originally Posted by jasoncarpenter1 View Post
nice build so far, i will be following this one. hefty does nice work......
Thanks

I got my CNC in now Jim so let me know if you still need those SAS parts and I can get going on them
Hefty is offline  
post #9 of 466 (permalink) Old 05-26-2010, 09:40 AM
Fullsize Member
 
Join Date: May 2010
Location: Las Vegas
Posts: 129
Bronco Info: 96 Bronco 5.8, Auto, 100k miles STOCK for now!
iTrader: (0)
parts look great so far, your Bronco is one of my favorites on this entire board

96 Bronco- Black, 100k miles coming soon-6" BDS Stage 2 lift, 35" Toyos, 17" XD wheels, Bronco air bumpers
BUILD THREAD
vegasdeven is offline  
post #10 of 466 (permalink) Old 05-26-2010, 12:13 PM Thread Starter
Fullsize Member
 
silent one's Avatar
 
Join Date: Dec 2004
Location: Northport,N.Y.
Posts: 7,068
Bronco Info: 1995 sport,6''SAS 37's streetlocks 4.56's ARB,BroncoAir rear bumper HeftyFabworks front bumper
iTrader: (16)
Quote:
Originally Posted by Hefty View Post
I got my CNC in now Jim so let me know if you still need those SAS parts and I can get going on them
Yeah i still need an upper track bar mount for my SAS so let see what you can come up with.

The bumper is painted and is getting put on tonight so i will have pics later.


KEEP CALM AND BRONCO ON
Silent One's Supermotors Page
January 2010 FOTM Winner
@silentjde on instagram
silent one is online now  
post #11 of 466 (permalink) Old 05-26-2010, 10:16 PM Thread Starter
Fullsize Member
 
silent one's Avatar
 
Join Date: Dec 2004
Location: Northport,N.Y.
Posts: 7,068
Bronco Info: 1995 sport,6''SAS 37's streetlocks 4.56's ARB,BroncoAir rear bumper HeftyFabworks front bumper
iTrader: (16)
Ok i got the bumper put in but not without issue. I guess my frame horn were bent or something because the bumper didn't fit it was off by a 1/4 inch and Hefty didn't leave any room to play. So i busted out the BFH and and smacked the frame until it fit.

I also got some new Hella 700FF for free. Anyway on to the pics.











KEEP CALM AND BRONCO ON
Silent One's Supermotors Page
January 2010 FOTM Winner
@silentjde on instagram
silent one is online now  
post #12 of 466 (permalink) Old 05-26-2010, 10:25 PM
Registered User
 
lakemarykid's Avatar
 
Join Date: Feb 2007
Location: Lake Mary, Florida
Posts: 651
Bronco Info: 1994 F150 6" Lift 35's
iTrader: (10)
Wow Jim! That looks absolutely sexy! I'm torn between the Plate sides and tube now! Did you powdercoat?

-Curtis-

94' F-150-SAS 9" Superlift Coils, 3" Bucket Drop, Cage Radius Arms, 1.5" .250" DOM trac bar w/ 7/8" QA1 heims, Chevy 1 Ton TRE's, Ruff Stuff 6.5" Shackle Flip, Bilstein 5125 14", 38.5" Boggers, 15x12 Eagle Alloy, 4:88 YukonMy SAS
07' F-150 Supercrew FX4 Luxury-Gotts Intake, 2.5" Hell Bent Steel Leveling Kit
Quote:
Originally Posted by Andy351 View Post
your truck looks clean, props on a nice build and all, but it flexes like shit.
lakemarykid is offline  
post #13 of 466 (permalink) Old 05-26-2010, 10:37 PM
FSM Lifetime
 
KUIKUITZILLA's Avatar
 
Join Date: Sep 2008
Location: LORETO BAJA SUR MEXICO!!
Posts: 319
Bronco Info: BRONCO 78. Never End Project
iTrader: (0)
great!!!!!! Bronco!!!! grat stufff hefty!!!!

Full Size 78, Dana 60´s, 5.13 gears, ARB lockers, 41" Iroks, and a lot of love and patience!!
KUIKUITZILLA is offline  
post #14 of 466 (permalink) Old 05-26-2010, 10:37 PM
Fullsize Member
 
badass1tonf100's Avatar
 
Join Date: Jan 2005
Location: Florida
Posts: 14,618
Bronco Info: F100,460, 1tons, 203/205 doubler, sitting on 42" pitbull rockers.
iTrader: (94)
Nice! BTW where did you find the clear turn signals?

badass1tonf100 is offline  
post #15 of 466 (permalink) Old 05-26-2010, 10:38 PM
Registered User
 
lakemarykid's Avatar
 
Join Date: Feb 2007
Location: Lake Mary, Florida
Posts: 651
Bronco Info: 1994 F150 6" Lift 35's
iTrader: (10)
Quote:
Originally Posted by badass1tonf100 View Post
Nice! BTW where did you find the clear turn signals?

EGAY

94' F-150-SAS 9" Superlift Coils, 3" Bucket Drop, Cage Radius Arms, 1.5" .250" DOM trac bar w/ 7/8" QA1 heims, Chevy 1 Ton TRE's, Ruff Stuff 6.5" Shackle Flip, Bilstein 5125 14", 38.5" Boggers, 15x12 Eagle Alloy, 4:88 YukonMy SAS
07' F-150 Supercrew FX4 Luxury-Gotts Intake, 2.5" Hell Bent Steel Leveling Kit
Quote:
Originally Posted by Andy351 View Post
your truck looks clean, props on a nice build and all, but it flexes like shit.
lakemarykid is offline  
post #16 of 466 (permalink) Old 05-26-2010, 10:44 PM Thread Starter
Fullsize Member
 
silent one's Avatar
 
Join Date: Dec 2004
Location: Northport,N.Y.
Posts: 7,068
Bronco Info: 1995 sport,6''SAS 37's streetlocks 4.56's ARB,BroncoAir rear bumper HeftyFabworks front bumper
iTrader: (16)
Quote:
Originally Posted by lakemarykid View Post
Wow Jim! That looks absolutely sexy! I'm torn between the Plate sides and tube now! Did you powdercoat?

-Curtis-
Thanks Curtis, its painted and i really wish the had body worked it a little because you can see some of the weld marks but i think it looks good as is.

Quote:
Originally Posted by KUIKUITZILLA View Post
great!!!!!! Bronco!!!! grat stufff hefty!!!!
Thanks.

Quote:
Originally Posted by badass1tonf100 View Post
Nice! BTW where did you find the clear turn signals?
Thanks, i got the hole headlight assembly on Ebay last year but i don't remember the seller.


KEEP CALM AND BRONCO ON
Silent One's Supermotors Page
January 2010 FOTM Winner
@silentjde on instagram
silent one is online now  
post #17 of 466 (permalink) Old 05-26-2010, 11:44 PM
Need a Bumper?
 
Hefty's Avatar
 
Join Date: Jun 2008
Location: Monument, Colorado
Posts: 4,770
Bronco Info: 93 Bronco 7in SAS 38's 4.56 and rear detroit front e-locker, 72 bronco under construction
iTrader: (19)
Yeah my tolerances are tight. There should only be about a 1/4" of play so your frame must be off a little. I know when I mounted Landsharks that his frame was bent and was off by almost 3/4" I actually broke a highlift jack to get that frame to move. So far the other 25 or so that I've sold have gone on with no problem. Sorry for the hassle. Can you email me those pics Jim? [email protected]
Hefty is offline  
post #18 of 466 (permalink) Old 05-27-2010, 12:52 AM
Registered User
 
Join Date: Mar 2007
Location: Rancho Cucamonga, CA
Posts: 934
Bronco Info: 1995 5.8 E4OD. Rancho 4in.Ext. Radius Arms. 35x12.5 BFG Muds. Resi Shocks
iTrader: (1)
Its looking fantastic Jim, I REALLY WANT a Hefty Fab rear bumper like LandShark's but I'm broke and only philanthropists do thing Pro Bono.
BB33's is offline  
post #19 of 466 (permalink) Old 05-27-2010, 08:43 PM Thread Starter
Fullsize Member
 
silent one's Avatar
 
Join Date: Dec 2004
Location: Northport,N.Y.
Posts: 7,068
Bronco Info: 1995 sport,6''SAS 37's streetlocks 4.56's ARB,BroncoAir rear bumper HeftyFabworks front bumper
iTrader: (16)
Quote:
Originally Posted by Hefty View Post
Yeah my tolerances are tight. There should only be about a 1/4" of play so your frame must be off a little. I know when I mounted Landsharks that his frame was bent and was off by almost 3/4" I actually broke a highlift jack to get that frame to move. So far the other 25 or so that I've sold have gone on with no problem. Sorry for the hassle. Can you email me those pics Jim? [email protected]
I think i would have crapped my pants if it was that far off.

I will get those pics emailed to you soon.

Quote:
Originally Posted by BB33's View Post
Its looking fantastic Jim, I REALLY WANT a Hefty Fab rear bumper like LandShark's but I'm broke and only philanthropists do thing Pro Bono.
Thanks Kyle. If it weren't for my bosses son giving me money for the bumper after i did his lift kit i wouldn't have the bumper because i'am kind of spead a little thin myself.


KEEP CALM AND BRONCO ON
Silent One's Supermotors Page
January 2010 FOTM Winner
@silentjde on instagram
silent one is online now  
post #20 of 466 (permalink) Old 05-27-2010, 09:10 PM
Fullsize Member
 
KLAKEBRONCO's Avatar
 
Join Date: Feb 2010
Location: Sturgis MI 49091
Posts: 1,713
Bronco Info: 95 Bronco XL-302/E40D
iTrader: (5)
Great looking truck!!
That front bumper looks nice. Didn't know HF was building those (thought it was only tube)

Looking forward to more updates!

95 Bronco XL. 302
Quote:
Originally Posted by CJREX View Post
No matter how much it's washed, it's still a butt HOLE.
Quote:
Originally Posted by pfun41 View Post
just wanted to see if any pictures of women came up while i had it in.

WANTED: Sterling aftermarket diff cover, install kit, 3/4 Chevy Calipers, 4.88 gears, 1350 yoke.
KLAKEBRONCO is offline  
Sponsored Links
Advertisement
 
Reply

  Ford Bronco Forum > Bronco Discussions > 78 - 96 Build Forum....Builds only

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Bronco Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself. DO NOT USE Gmail.com accounts. If you only have a Gmail.com email please contact the administrator here

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome