Join Date: May 2006
Location: Hoyt, Kansas
Bronco Info: 85 Bronco, 309ci I6 w/4bbl, np435, 4" lift, 37" Irok NDs, 4.56 w/ Detroit Locker and tru trac
Since the bronco has zero carpet, and a bedliner interior, I wanted something in the back to cut down on noise and keep stuff from sliding. So I bought a rubber bed mat for a 90s f150 and trimmed it to fit. It goes all the way under the rear seat.
I also added a new stereo, two new door speakers, and a subwoofer.
Next up was the exhaust. I have long tube headers on this, so a custom y-pipe was required. I chose 2.5" pipe for the lead pipes, into a flowmaster scavenger y-collector and out in to a single 3" pipe. Im running a small magnaflow cat and a borla xr1 muffler. This was all done by myself, using a welder and mandrel bends.
Old vs new Y-pipe
Old vs new tailpipe
All tucked up nice and tight.
Full exhaust thread
Vote for Full-size Of The Month in January, March, May,
July, and September!
FOTM forum section
Last edited by BigBlue 94; 05-15-2019 at 04:29 PM.