Ford Bronco Forum - View Single Post - Catastrophic failure
View Single Post
post #93 of (permalink) Old 07-07-2019, 05:23 PM Thread Starter
Registered User
Doosenberry's Avatar
Join Date: Sep 2017
Location: Southern Idaho
Posts: 837
Bronco Info: 78 Bronco 351M/NP435/NP205 - Holley Sniper - Hedman Headers - MT Classic 3's - 35" MT Deegan 38s
iTrader: (0)
Ran into a snag out the gate, boys. Remember that rod that's bent and stuck in cylinder 8? Well, I'm trying to separate the engine and tranny so I can do with each as I please and that isn't going to happen, very easily, if I can't rotate things to get at the converter bolts. I highly recommend not nuking your engine...

I'm gonna see if I can get a wrench in between the engine and tranny as I have about an inch gap between the two at the moment. The rear of the block and the converter look great though! Nice and shiny paint...

77 F100 Custom SWB - 302/C4 2wd ~ My Daily Driver
78 Bronco Custom T/S - 351M/NP205/NP435 4wd ~ For Fun
75 F150 Custom LWB - 460/C6 2wd ~ Deceased
Doosenberry is online now  
For the best viewing experience please update your browser to Google Chrome