|Topic Review (Newest First)|
|05-09-2015 11:27 PM|
|RAMPNT1||Ironically Tong Yang is the sound it made when it was being stamped AND the name of the guy working the press.|
|05-09-2015 11:15 PM|
"We" got the driver door hung today.
Stepped up to the plate when I told him I was going to work on the Bronco.
|05-09-2015 12:15 AM|
|Phoneman||rust is the devil!|
|05-08-2015 11:29 PM|
|RAMPNT1||Makes me smile to see that truck being worked on.|
|05-08-2015 11:11 PM|
, I haven't done anything to this since November.
Incase you haven't been keeping up with this months FOTM. I did a lil work today.
Tomorrow I'll try and get the other usable parts swapped over from the old door.
|11-21-2014 09:06 PM|
Nice day out today so I cut some sheet metal.
Still some triming to do on this side then get the rot out. Need to drill out the spot welds. Then I can secure this and move over to the other side.
Started brushing up all the rust scale.
|10-19-2014 08:50 PM|
|JBandit03||Looking good. Wish I was able to swap the '77 front end from my F250 when I got my bronco.|
|10-16-2014 06:06 AM|
|sky_high_customs||a lot of work i give you props|
|10-13-2014 10:26 AM|
|379sinvb||Thanks Dave, slowly but surely.|
|10-12-2014 07:56 PM|
|raleigh||Coming along nicely Rick!|
|10-12-2014 03:05 PM|
Trey helped me put the new rubbers on. Wheels are the originals but blasted and painted.
|10-10-2014 02:46 PM|
Good deal. I'm gonna try and get those other pieces cut if time and weather work out. Don't worry about those blocks now my 10.25 under my pig.
Sent from AutoGuide.com Free App
|10-10-2014 02:09 PM|
|379sinvb||The springs were in the box buddy. Will do on the notification.|
|10-09-2014 09:47 PM|
Glad they made it are the seat spring still in. Let me know before you need to weld them in.
Sent from AutoGuide.com Free App
|10-08-2014 07:53 AM|
With the arrival of this latest package work shall resume shortly.
Thanks Stuart, I think these are going to work nicely.
|07-29-2014 11:55 AM|
Finally got around to finish reading your build thread. Man, you've been through a lot with this thing! I'm just starting to rebuild mine, hope I don't have that kind of rust when I remove the vinyl floor. Your determination has inspired me. If you can bring this girl back to life, I should be able to do the same.
Keep up the good work. Post lots of pics!
|06-22-2014 09:11 AM|
Originally Posted by The Ol' Big Red View Post
Originally Posted by NAMELESS View Post
Messed with the gate that previously worked but has since stopped. Bypassed the switch that seems to have quit and rolled it down for easey access to cargo area. I'm going to vaccum it again, brush it with a wire brush then spray it with some ospho. The MEB Round Up is next week so look for some progress in July.
|06-20-2014 11:26 AM|
That is a shit ton of rust to deal with, props to you for going through with the build
Gonna be worth it in the end, good job so far.
|06-12-2014 09:39 AM|
|The Ol' Big Red||Your a hero! I can't believe your gonna save this truck. That rust is sickening, but it is all worth it once you got it put back together|
|06-08-2014 10:24 AM|
I did drve it around the yard. Brakes worked well on the short drive. Need to get my vac lines straight to cure the idle issue. Once the interior is back in I'll take the milk crate out and install the seat. Still lots to do before then.
|This thread has more than 20 replies. Click here to review the whole thread.|