Ford Bronco Forum

Ford Bronco Forum (https://www.fullsizebronco.com/forum/)
-   General Discussion/ Bronco and Wheeling related. (https://www.fullsizebronco.com/forum/15-general-discussion-bronco-wheeling-related/)
-   -   What did you do to your bronco today? (https://www.fullsizebronco.com/forum/15-general-discussion-bronco-wheeling-related/181308-what-did-you-do-your-bronco-today.html)

tonyroc14 09-04-2010 05:20 PM

What did you do to your bronco today?
 
Lets get a sticky!!!

It's easy, tell us anything you've done to your Bronco today. It could be as simple as staring at it, or as complicated as finishing a SAS, doesn't matter


I washed mine today, and tried to fix my loose passenger side mirror

malofish 09-04-2010 05:34 PM

Filled up both tanks with fuel, and spilled my damn soda!

ProBronco 09-04-2010 05:50 PM

Installed pool noodles on my shifters, new master cylinder, buffed the hood out. charged the battery, adjusted the rear tailgate, clay bared the rear glass.

SourMashII 09-04-2010 05:59 PM

got the turbo pulled. Traded the 10 wide rims for 12 wide rims. Ordered the adapters for the rear axle to run the S duty wheels. And snagged a CobraJet style hood scoop for it.

JKossarides 09-04-2010 06:01 PM

Just drove it around doing errands......:thumbup

pappabacon 09-04-2010 06:02 PM

Started it up and watched her smoke :banghead

Spectre 09-04-2010 06:07 PM

There's already a thread like this.. =)

However I put the drive shaft back in, put the tires on and parked it across the street.. Sad thing is I have to put it back in the driveway to just take it all off tomorrow. =(

ta1001 09-04-2010 06:20 PM

Took the top off and also the bumper to figure out how I'm going to install recovery points.

stonepaw913 09-04-2010 06:24 PM

In the 20 miles I drove today, I somehow bent the rear driveshaft.

Rockford514 09-04-2010 06:29 PM

Walked around it all day working on other junk

777Bigmac777 09-04-2010 07:30 PM

just got down driving her around for a while

malofish 09-04-2010 07:32 PM

I just checked what type of injectors i have and am now working on finding help installing my new to me edelbrock intake...

Spectre 09-04-2010 07:46 PM

Quote:

Originally Posted by Rockford514 (Post 2458856)
Walked around it all day working on other junk

Sounds like mine. I moved it out of the driveway to work on someones car and then I just finished welding on someones trailer..

Spent all day in the 105 degree heat working on things for other people and not my stuff.. :doh0715:

impalaslayer 09-04-2010 07:50 PM

put a new steering box on and now its worse then when i started :(

silent one 09-04-2010 09:19 PM

I washed mine.

JERAD121 09-04-2010 09:23 PM

i said a few choice swear words to it since its sitting in my driveway not running right now

BroncoAl 09-04-2010 11:07 PM

I painted my door panels and put in a new steering box

JScatt 09-05-2010 12:43 AM

Scored a perfect Jumpseat out of a F250 then installed it. To fricken hot to do much more

Bennelton 09-05-2010 01:07 AM

I looked at a couple pics of mine and compared it to Gacknar's thats saved on my desktop and wished i could make my body that smooth and shiney.:cry

Quote:

Originally Posted by Spectre (Post 2458895)
Spent all day in the 105 degree heat working on things for other people and not my stuff.. :doh0715:

Must be nice to live someplace sol blessed with cool temps. Here it's 98* at 1am. During the day its near 130-140 * during most of the summer months. Iraq blows big hairy sand encrusted camel sack.

Ryan87LX 09-05-2010 01:07 AM

Installed front accessory drive, engine wiring harness and filled the engine with oil.

Tomorrow add upper intake, coolant, tighten exhaust, and start her up.

Hopefully :)


All times are GMT -4. The time now is 02:21 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome